Journal of Applied Fluid Mechanics

Keywords = Computational Fluid Dynamics

Numerical Research on Effect of Base Bleed Type on ‎Operation Process of Base Bleed Projectile

Volume 14, Issue 5, September 2021, Pages 1583-1591

10.47176/jafm.14.05.32343

M. Wang; C. Zhuo

Flow Conditions Influence on the Instability of a Pump Characteristic

Volume 14, Issue 4, July 2021, Pages 1249-1255

10.47176/jafm.14.04.32464

A. Lipej

Computational Investigation of the Effect of Wall Thickness on Rupture Risk in Abdominal Aortic Aneurysms

Volume 14, Issue 2, March 2021, Pages 499-513

10.47176/jafm.14.02.31727

H. E. Salman; H. C. Yalcin

Fluid-Structure Interaction Simulation of Excess Flow Valve Movement at Different Operating Pressures and Gas Flow Rates

Volume 14, Issue 2, March 2021, Pages 615-625

10.47176/jafm.14.02.31717

G. Coşkun; H. Pehlivan

Computational Analysis on the Performance of Centrifugal Compressor with Tapered Wall and Rotating Tapered Wall Vaneless Diffuser

Volume 14, Issue 2, March 2021, Pages 641-656

10.47176/jafm.14.02.32008

P. Niveditha; B. V. S. S. S Prasad

Low Reynolds Number Turbulence Models to Simulate the Bubble Plume Behavior with the Euler-Euler Method

Volume 14, Issue 1, January 2021, Pages 1-10

10.47176/jafm.14.01.31158

S. Besbes; M. El Hajem; H. Ben Aissia; J. Y. Champagne

Impact of a Tapered Design in the Performance of Diffusion Flame Reactors

Volume 14, Issue 1, January 2021, Pages 201-214

10.47176/jafm.14.01.31451

A. C. Klemz; É. Fontana; A. A. U. de Souza; S. M. A. G. U. de Souza

Analytical and Numerical Investigation of the Airflow in Face Masks used for Protection against COVID-19 Virus –Implications for Mask Design and Usage

Volume 13, Issue 6, November 2020, Pages 1911-1923

10.47176/jafm.13.06.31812

R. Perić; M. Perić

Optimization of Wrap Angle in the Mixed Flow Impeller for Reducing Flow Losses

Volume 13, Issue 6, November 2020, Pages 1949-1957

10.47176/jafm.13.06.31354

T. Prabu; P. Viswanathan; N. Gokul Kannan; R. Rudramoorthy; A. Firthouse

Flow of a Thixotropic Bingham Fluid over a Cylinder in Stationary and Non-Stationary Regimes

Volume 13, Issue 5, September 2020, Pages 1527-1538

10.36884/jafm.13.05.31127

C. M. Bui; T. X. Ho

A Reliable Pressure Strain Correlation Model for Complex Turbulent Flows

Volume 13, Issue 4, July 2020, Pages 1167-1178

10.36884/jafm.13.04.30940

J. P. Panda

Investigation of Air Flow Characteristics in Air Intake Hoses using CFD and Experimental Analysis based on Deformation of Rubber Hose Geometry

Volume 13, Issue 3, May 2020, Pages 871-880

10.29252/jafm.13.03.30497

K. Furkan Sokmen; O. Bedrettin Karatas

Numerical Study of Water Vapor Injection in the Combustion Chamber to Reduce Gas Turbine Fuel Consumption

Volume 13, Issue 3, May 2020, Pages 1047-1054

10.29252/jafm.13.03.30466

R. Sharafodini; M. R. Habibi; M. Pirmohammadi

Analysis on the Performance Improvement of Reciprocating Pump with Variable Stiffness Valve using CFD

Volume 13, Issue 2, March 2020, Pages 387-400

10.29252/jafm.13.02.30478

G. Zhu; S. M. Dong

Turbulence Model Selection for Heavy Gases Dispersion Modeling in Topographically Complex Area

Volume 12, Issue 6, November 2019, Pages 1745-1755

10.29252/jafm.12.06.29685

Fz. Mirzaei; Fs. Mirzaei; E. Kashi

Comparison of Conventional and Modified Burners in Performance with Different Fuels using a Linear and a Non-linear Eddy-viscosity Turbulence Model

Volume 12, Issue 6, November 2019, Pages 2069-2081

10.29252/jafm.12.06.29870

M. U. Yangaz; G. A. Çiftçioğlu; M. A. N. Kadırgan

Computational Fluid Dynamics Simulation on Particulate Distribution in Gyro Casting for the Manufacture of Al/SiC Particulate Metal Matrix Composite

Volume 12, Issue 5, September 2019, Pages 1585-1597

10.29252/jafm.12.05.29637

P. A. Abdul Samad; P. R. Shalij; A. Ramesh; A. K. Mubarak

Investigation of Parameters Affecting Axial Load in an End Suction Centrifugal Pump by Numerical Analysis

Volume 12, Issue 5, September 2019, Pages 1615-1627

10.29252/jafm.12.05.29623

H. Pehlivan; Z. Parlak

2-D Simulation with OH* Kinetics of a Single-Cycle Pulse Detonation Engine

Volume 12, Issue 4, July 2019, Pages 1249-1263

10.29252/jafm.12.04.29593

E. C. Maciel; C. S. T. Marques

Blood Flow in Channel Constrictions: A Lattice-Boltzmann Consistent Comparison between Newtonian and Non-Newtonian Models

Volume 12, Issue 4, July 2019, Pages 1333-1345

10.29252/jafm.12.04.29434

G. A. Orozco; C. T. Gonzáles-Hidalgo; A. D. Mackie; J. C. Diaz; D. A. Roa Romero

A Computational Fluid Dynamics Investigation on the Drag Coefficient Measurement of an AUV in a Towing Tank

Volume 12, Issue 3, May 2019, Pages 947-959

10.29252/jafm.12.03.29525

E. Javanmard; Sh. Mansoorzadeh

Effect of Stenosis Severity on Wall Shear Stress Based Hemodynamic Descriptors using Multiphase Mixture Theory

Volume 11, Issue 6, November 2018, Pages 1497-1509

10.29252/jafm.11.06.29062

A. Buradi; A. Mahalingam

An Explicit Approach of Natural Ventilation for Various Orientation of Wind Catcher Openings using CFD

Volume 11, (Special Issue), September and October 2018, Pages 103-105

10.36884/jafm.11.SI.29424

V. Sivakumar; K. Visagavel; A. Selvakumar; C. Jayavel

Design Optimization of Ceiling Fan Blades with Nonlinear Sweep Profile

Volume 11, Issue 5, September 2018, Pages 1153-1162

10.29252/jafm.11.05.27857

E. Adeeb; C. H. Sohn; A. Maqsood; M. A. Afaq

Numerical Visualization of Blast Wave Interacting with Objects

Volume 11, Issue 5, September 2018, Pages 1201-1206

10.29252/jafm.11.05.28240

S. Dey; T. Murugan; D. Chatterjee

Journal Archive

Volume 19 (2026)

Volume 18 (2025)

Volume 17 (2024)

Volume 16 (2023)

Volume 15 (2022)

Volume 14 (2021)

Volume 13 (2020)

Volume 12 (2019)

Volume 11 (2018)

Volume 10 (2017)

Volume 9 (2016)

Volume 8 (2015)

Volume 7 (2014)

Volume 6 (2013)

Volume 5 (2012)

Volume 4 (2011)

Volume 3 (2010)

Volume 2 (2009)

Volume 1 (2008)