A
-
Abbasi, S.
Effects of Blowing Location on Aeroacoustics of the Flow over a Circular Cylinder [Volume 15, Issue 1, 2022, Pages 231-243]
-
Agha Mirsalim, S. M.
Multi-objective Optimization and Sensitivity Analysis of the Parameters Affecting Sealing Performance of the Piston Rings Face through the Validated Model for the Four-stroke Bi-fuel Engine [Volume 15, Issue 5, 2022, Pages 1345-1360]
-
Ahmadi, G.
Aerodynamic and Aeroacoustic Performance of a Wing with Structured Surface Inspired by Owl’s Wings [Volume 15, Issue 4, 2022, Pages 1243-1253]
-
Ahn, J.
Injection Properties According to the Inner Shape of Metal Additive Layer Manufactured Coaxial Injectors [Volume 15, Issue 4, 2022, Pages 1231-1241]
-
Ahn, K.
Injection Properties According to the Inner Shape of Metal Additive Layer Manufactured Coaxial Injectors [Volume 15, Issue 4, 2022, Pages 1231-1241]
-
Almansoori, A. Q.
Multi-objective Optimization and Sensitivity Analysis of the Parameters Affecting Sealing Performance of the Piston Rings Face through the Validated Model for the Four-stroke Bi-fuel Engine [Volume 15, Issue 5, 2022, Pages 1345-1360]
-
Aminossadati, S. M.
Simulation of Variable Magnetic Field Effect on Natural Convection Heat Transfer of Fe3O4/Graphite Slurry based on Experimental Properties of Slurries [Volume 15, Issue 1, 2022, Pages 1-14]
-
Aminudin, A.
A Passive Micromixer with Koch Snowflakes Fractal Obstacle in Microchannel [Volume 15, Issue 5, 2022, Pages 1333-1344]
-
Ansari, M. R.
An LES-Like Multiscale Multiphase Flow Model Based on Break-up and Coalescence Phenomena [Volume 15, Issue 4, 2022, Pages 1073-1085]
-
Ansoni, J. L.
Velocity Gradient Optimization in a Perforated Tray-Type Flocculator using OpenFOAM: CFD as a Tool in Water Treatment [Volume 15, Issue 2, 2022, Pages 387-397]
-
Araujo, M. E. V.
Natural Convection and Radiation in Enclosures with Semi-transparent Medium: Conjugate CFD Analysis [Volume 15, Issue 5, 2022, Pages 1307-1318]
-
Arispe Angulo, T. M.
Free and Non-Free Vortex Design for Axial Fans with Circumferential Sweep through CFD Techniques [Volume 15, Issue 4, 2022, Pages 1017-1034]
-
Asgarnejad, S.
Triple-Nozzle Thermo-Compressor: Geometrical Investigation and Comparison with Single-Nozzle Thermo-Compressor [Volume 15, Issue 6, 2022, Pages 1693-1702]
-
Askari, R.
Computational Investigation of Effects of Side-Injection Geometry on Thrust-Vectoring Performance in a Fuel-Injected Dual Throat Nozzle [Volume 15, Issue 4, 2022, Pages 1137-1153]
-
Askarian Khoob, A.
Experimental Investigation of a Wave-Piercing Trimaran on the Outrigger Configurations in terms of Seakeeping and Added Resistance [Volume 15, Issue 1, 2022, Pages 51-62]
-
Asmadi, M. S.
Thermal Enhancement Effects of Buoyancy-Driven Heat Transfer of Hybrid Nanofluid Confined in a Tilted U-Shaped Cavity [Volume 15, Issue 2, 2022, Pages 337-348]
-
Azzam, T.
Mechanism of Vortices Appearance in the Taylor-Couette Flow System [Volume 15, Issue 1, 2022, Pages 129-137]
B
-
Bachok, N.
Mixed Convection Magnetic Nanofluid Flow past a Rotating Vertical Porous Cone [Volume 15, Issue 4, 2022, Pages 1207-1220]
-
Bae, Y. S.
A Study on Booster Pump System with Flow Sensor for Individual Flow Control Method [Volume 15, Issue 3, 2022, Pages 889-900]
-
Balakrishna, B.
Experimental Investigation of Aluminum Oxide Nanofluid on Closed Loop Pulsating Heat Pipe Performance [Volume 15, Issue 6, 2022, Pages 1947-1955]
-
Balasubramanian, K. R.
Flow Estimation by Flow Induced Vibration of Bluff Bodies [Volume 15, Issue 5, 2022, Pages 1465-1476]
-
Barati, P.
Optimum Geometric Bifurcation under Pulsating Flow Assuming Minimum Energy Consumption in Cardiovascular System, an Extension on Murray’s Law [Volume 15, Issue 3, 2022, Pages 687-695]
-
Barbosa, E. G.
Natural Convection and Radiation in Enclosures with Semi-transparent Medium: Conjugate CFD Analysis [Volume 15, Issue 5, 2022, Pages 1307-1318]
-
Barbosa, E. G.
Natural Convection and Radiation in Enclosures with Semi-transparent Medium: Conjugate CFD Analysis [Volume 15, Issue 5, 2022, Pages 1307-1318]
-
Bazazzadeh, M.
Numerical Study of Stream-wise and Span-wise Nanosecond DBD Plasma Actuators Effects on Supersonic Flow Separation [Volume 15, Issue 4, 2022, Pages 1035-1047]
-
Bedram, A.
Analytical and Numerical Investigation of Non-Newtonian Droplet Breakup in Asymmetric T-junction [Volume 15, Issue 2, 2022, Pages 491-503]
-
Bekhti, A.
A CFD Study of the Effects of Slots on Energy Harvesting from Flow-Induced Circular Cylinder Vibrations [Volume 15, Issue 5, 2022, Pages 1581-1591]
-
Bel Hadj Taher, A.
Numerical Prediction Approach of Cavitation Erosion based on 3D Simulation Flow [Volume 15, Issue 4, 2022, Pages 1165-1177]
-
Belkadi, H.
Axial Flow Effect on the Stability of Circular Couette Flow [Volume 15, Issue 1, 2022, Pages 271-281]
-
Benaiche, A.
Mechanism of Vortices Appearance in the Taylor-Couette Flow System [Volume 15, Issue 1, 2022, Pages 129-137]
-
Benhacine, H.
Stability of an Electrically Conducting Fluid Flow between Coaxial Cylinders under Magnetic field [Volume 15, Issue 2, 2022, Pages 563-577]
-
Bi, Y.
CPFD Simulation of Gas-Solid Flow in Dense Phase Zone of Pant-Leg Fluidized Bed with Secondary Air [Volume 15, Issue 5, 2022, Pages 1319-1331]
-
Bian, C. J.
Aerodynamic Response Analysis of High-Speed Trains Passing through High Platforms under Crosswind [Volume 15, Issue 5, 2022, Pages 1525-1543]
-
Biju, N.
Artificial Neural Network- Genetic Algorithm based Optimization of Baffle Assisted Jet Array Impingement Cooling with Cross-Flow [Volume 15, Issue 2, 2022, Pages 441-451]
-
Bilgili, M.
Particle Image Velocimetry Investigation of the Flow for the Curved Type Wind Turbine Shroud [Volume 15, Issue 2, 2022, Pages 373-385]
-
Bo, H.
Influence Rule of Projectile Density on the Characteristics of High-Speed Water-Entry Cavity [Volume 15, Issue 6, 2022, Pages 1901-1912]
-
Bouabdallah, A.
Mechanism of Vortices Appearance in the Taylor-Couette Flow System [Volume 15, Issue 1, 2022, Pages 129-137]
-
Bouabdallah, A.
Axial Flow Effect on the Stability of Circular Couette Flow [Volume 15, Issue 1, 2022, Pages 271-281]
-
Bouzit, M.
Effects of Different Shaped Cavities and Bumps on Flow Structure and Wing Performance [Volume 15, Issue 6, 2022, Pages 1649-1660]
-
Bukurov, M.
Numerical Study of the L/D Ratio and Turbulent Prandtl Number Effect on Energy Separation in a Counter-Flow Vortex Tube [Volume 15, Issue 5, 2022, Pages 1503-1511]
-
Burazer, J.
Numerical Study of the L/D Ratio and Turbulent Prandtl Number Effect on Energy Separation in a Counter-Flow Vortex Tube [Volume 15, Issue 5, 2022, Pages 1503-1511]
C
-
Cadirci, S.
Flow Separation Control on NACA0015 Airfoil Using Synchronized Jet Actuator [Volume 15, Issue 2, 2022, Pages 427-440]
-
Cao, C.
Multiscale Analysis of Hydrodynamic Step Bearing with Ultra Low Surface Separations [Volume 15, Issue 3, 2022, Pages 737-745]
-
Cao, X.
CFD-DEM-based Numerical Simulation of Erosion Characteristic of Multistage Pressure Relief String Regulating Valve [Volume 15, Issue 4, 2022, Pages 999-1015]
-
Cao, Z.
Influence of Blade Lean on Performance and Shock Wave/Tip Leakage Flow Interaction in a Transonic Compressor Rotor [Volume 15, Issue 1, 2022, Pages 153-167]
-
Cardoso Netto, D.
Study of the Behavior of a Vertical Axis Eolic Turbine with Articulated Blades [Volume 15, Issue 2, 2022, Pages 603-615]
-
Casillas Farfán, C.
Novel Induction Blade Design for Horizontal Axis Wind Turbines to Improve Starting Phase: CFD and Testing Analysis [Volume 15, Issue 6, 2022, Pages 1635-1648]
-
Chai, J. S.
Experimental Investigation on Flow Characteristics in a Turbine Rotor-Stator Cavity with Inlet at Low Radius [Volume 15, Issue 1, 2022, Pages 73-84]
-
Chang, C.
On the Scale Size of the Aerodynamic Characteristics of a High-Speed Train [Volume 15, Issue 1, 2022, Pages 209-219]
-
Chang, C. C.
Experimental Study on Breakup and Transition of a Rotating Liquid Jet [Volume 15, Issue 3, 2022, Pages 757-765]
-
Chang, J.
Investigations on the Interfering Factor of Single Synthetic Jet Actuator on Improving the Efficiency of Wing Control Surface [Volume 15, Issue 6, 2022, Pages 1801-1813]
-
Chawla, R.
Optimisation of Trapped Vortex Cavity for Airfoil Separation Control [Volume 15, Issue 1, 2022, Pages 179-191]
-
Chen, C. K.
Experimental Study on Breakup and Transition of a Rotating Liquid Jet [Volume 15, Issue 3, 2022, Pages 757-765]
-
Chen, D.
Influence of a Wavy Blade-End Applied in an Axial Compressor Cascade on the Secondary Flow of the Passage [Volume 15, Issue 4, 2022, Pages 1255-1268]
-
Chen, G.
Numerical Analysis of the Effect of Streamlined Nose Length on Slipstream of High-Speed Train Passing through a Tunnel [Volume 15, Issue 6, 2022, Pages 1933-1945]
-
Chen, H.
Influence of Axial Position of Self-Circulating Casing Treatment on the Performances of a Centrifugal Pump at Low Mass Flow Conditions [Volume 15, Issue 3, 2022, Pages 697-708]
-
Chen, H. X.
A Delayed Detached Eddy Simulation Model for the Simulation of Complex Turbulent Flow [Volume 15, Issue 4, 2022, Pages 1111-1124]
-
Chen, J. Y.
Study on Flow Boiling Heat Transfer in Segmented Internally-Threaded Tube [Volume 15, Issue 5, 2022, Pages 1417-1426]
-
Chen, L.
Study on Flow Characteristics of Helium Turboexpander with a Novel Intake Structure [Volume 15, Issue 3, 2022, Pages 793-802]
-
Chen, M. M.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Chen, S. H.
Flow Structure Investigation of a Truck under Crosswinds [Volume 15, Issue 5, 2022, Pages 1513-1523]
-
Chen, X.
Numerical Study on the Effect of Jet on the Operation of Powder Fuel Scramjet [Volume 15, Issue 1, 2022, Pages 117-127]
-
Chen, X.
Liquid Film Condensation behind Shock Waves on the Cold Wall of a Diaphragmless Vertical Shock Tube: An Experimental Study [Volume 15, Issue 3, 2022, Pages 781-791]
-
Chen, X.
Numerical Investigation of Flow Characteristics in a Centrifugal Pump Impeller with Sinusoidal Flow Rates of Different Oscillation Amplitudes [Volume 15, Issue 6, 2022, Pages 1869-1879]
-
Chen, X. B.
Inverse Design and Optimization of Low Specific Speed Centrifugal Pump Blade Based on Adaptive POD Hybrid Model [Volume 15, Issue 2, 2022, Pages 453-464]
-
Chen, Y.
Method of Improving Stability of a Highly-Loaded Axial Compressor Stage by Coupling Different Casing Treatments [Volume 15, Issue 3, 2022, Pages 645-657]
-
Cheng, G.
A Choking Cavitation Method and Equipment for Degrading Pollutants in Wastewater [Volume 15, Issue 1, 2022, Pages 245-253]
-
Cheng, G.
Numerical Investigation on Aerodynamic Drag and Noise of Pantographs with Modified Structures [Volume 15, Issue 2, 2022, Pages 617-631]
-
Cheng, H. C.
Experimental Investigation on Flow Characteristics in a Turbine Rotor-Stator Cavity with Inlet at Low Radius [Volume 15, Issue 1, 2022, Pages 73-84]
-
Cheng, R.
Effect of Contact Angle Hysteresis on Evaporation Dynamics of a Sessile Drop on a Heated Surface [Volume 15, Issue 5, 2022, Pages 1361-1376]
-
Chu, W.
Method of Improving Stability of a Highly-Loaded Axial Compressor Stage by Coupling Different Casing Treatments [Volume 15, Issue 3, 2022, Pages 645-657]
-
Cocic, A.
Numerical Study of the L/D Ratio and Turbulent Prandtl Number Effect on Energy Separation in a Counter-Flow Vortex Tube [Volume 15, Issue 5, 2022, Pages 1503-1511]
-
Coskun, G.
Investigation of the Smoke Ventilation and Evacuation Strategies to Decrease Smoke Poisoning Risk by Coupling Fire and Evacuation Simulations [Volume 15, Issue 3, 2022, Pages 659-671]
D
-
Dai, H.
Influence Rule of Projectile Density on the Characteristics of High-Speed Water-Entry Cavity [Volume 15, Issue 6, 2022, Pages 1901-1912]
-
Dalkilic, A. S.
Numerical Modeling of Interactions between Solitary Waves and Floating Breakwaters [Volume 15, Issue 6, 2022, Pages 1675-1691]
-
Das, B.
Thermo-Hydraulic Analysis of Slightly Inclined Finned Channel under Natural Convection [Volume 15, Issue 4, 2022, Pages 985-998]
-
DebRoy, P.
Generation of Stable Linear Waves in Shallow Water in a Numerical Wave Tank [Volume 15, Issue 2, 2022, Pages 537-549]
-
Delbari, S. H.
Investigating the Effects of Tip Modification on High-Frequency Noise Emission of CART II Wind Turbine using a Hybrid Computational Aeroacoustic Approach [Volume 15, Issue 4, 2022, Pages 973-984]
-
Demir, U.
Investigation of the Smoke Ventilation and Evacuation Strategies to Decrease Smoke Poisoning Risk by Coupling Fire and Evacuation Simulations [Volume 15, Issue 3, 2022, Pages 659-671]
-
Demircan, T.
Analysis of Thermal and Flow Characteristics in a Combined Cross-Flow and Jet-Flow Configuration with Flow-Guiding Fins [Volume 15, Issue 6, 2022, Pages 1729-1744]
-
Deng, H. Y.
Numerical Study on the Effect of Jet on the Operation of Powder Fuel Scramjet [Volume 15, Issue 1, 2022, Pages 117-127]
-
Deng, L.
Experimental Research of Two-phase Rotating Detonation Combustor Operating with High Total Temperature Air [Volume 15, Issue 5, 2022, Pages 1437-1449]
-
Deng, N.
Numerical Analysis of the Effect of the Non-Sinusoidal Trajectories on the Propulsive Performance of a Bionic Hydrofoil [Volume 15, Issue 3, 2022, Pages 917-925]
-
Deng, W. J.
Investigation on Jet Characteristics of Turbofan Exhaust System under Take-off Condition with High Angle of Attack [Volume 15, Issue 3, 2022, Pages 943-958]
-
Ding, C.
Liquid Film Condensation behind Shock Waves on the Cold Wall of a Diaphragmless Vertical Shock Tube: An Experimental Study [Volume 15, Issue 3, 2022, Pages 781-791]
-
Ding, H.
Dynamics of Particle-Laden Wake Flow in a Karman Vortex Street Considering the Droplet-Vortex Interactions [Volume 15, Issue 3, 2022, Pages 857-872]
-
Ding, H. M.
Numerical Study on the Effect of Jet on the Operation of Powder Fuel Scramjet [Volume 15, Issue 1, 2022, Pages 117-127]
-
Ding, P.
A DDES Model with Subgrid-scale Eddy Viscosity for Turbulent Flow [Volume 15, Issue 3, 2022, Pages 831-842]
-
Dong, L.
Effect of Volute Geometry on Radial Force Characteristics of Centrifugal Pump during Startup [Volume 15, Issue 1, 2022, Pages 25-36]
-
Dong, Y.
3D Numerical Simulation of a Hovering Hummingbird-inspired Flapping Wing with Dynamic Morphing [Volume 15, Issue 3, 2022, Pages 873-888]
-
Dou, H. S.
Most Suitable Blade Inclination Angle for Multiphase Flow in Soybean Milk Machine [Volume 15, Issue 2, 2022, Pages 349-361]
-
Du, C. J.
Influence Rule of Projectile Density on the Characteristics of High-Speed Water-Entry Cavity [Volume 15, Issue 6, 2022, Pages 1901-1912]
-
Du, L. M.
Aerodynamic Response Analysis of High-Speed Trains Passing through High Platforms under Crosswind [Volume 15, Issue 5, 2022, Pages 1525-1543]
-
Du, Y. J.
Analysis on the Performances of Misaligned Journal Bearings using Full-Scale Test Rig and Conjugate Heat Transfer Method [Volume 15, Issue 3, 2022, Pages 747-756]
-
Duan, A.
CFD-DEM-based Numerical Simulation of Erosion Characteristic of Multistage Pressure Relief String Regulating Valve [Volume 15, Issue 4, 2022, Pages 999-1015]
-
Duan, T.
Influence of a Wavy Blade-End Applied in an Axial Compressor Cascade on the Secondary Flow of the Passage [Volume 15, Issue 4, 2022, Pages 1255-1268]
E
-
Erdem, D.
Flow Separation Control on NACA0015 Airfoil Using Synchronized Jet Actuator [Volume 15, Issue 2, 2022, Pages 427-440]
-
Etemadi Haghighi, S.
Aerodynamic and Aeroacoustic Performance of a Wing with Structured Surface Inspired by Owl’s Wings [Volume 15, Issue 4, 2022, Pages 1243-1253]
-
Ezzatneshan, E.
On Accuracy of Lattice Boltzmann Method Coupled with Cahn-Hilliard and Allen-Cahn Equations for Simulation of Multiphase Flows at High-Density Ratios [Volume 15, Issue 6, 2022, Pages 1771-1787]
F
-
Fan, J.
A General Approach for Flow Optimization and Drag Reduction in Turbulent Pipe Flows [Volume 15, Issue 3, 2022, Pages 815-829]
-
Feizi, A.
Experimental Investigation of a Wave-Piercing Trimaran on the Outrigger Configurations in terms of Seakeeping and Added Resistance [Volume 15, Issue 1, 2022, Pages 51-62]
-
Fellouah, H.
Improved Stall Delay Model for HAWT Performance Predictions using 3D Navier-Stokes Solver and Actuator Disk Method [Volume 15, Issue 1, 2022, Pages 37-50]
-
Ferrante, A.
Investigation of Isothermal Flow inside a New Combustor with Two-Stage Axial Swirler [Volume 15, Issue 2, 2022, Pages 325-336]
-
Figueroa, K.
Novel Induction Blade Design for Horizontal Axis Wind Turbines to Improve Starting Phase: CFD and Testing Analysis [Volume 15, Issue 6, 2022, Pages 1635-1648]
-
Fogal, M. L. F.
Analysis and Reduction of the Sloshing Phenomena Due To Sudden Movement of Spray Mixture Tanker [Volume 15, Issue 2, 2022, Pages 399-413]
-
Fortes Miranda, L.
Study of the Behavior of a Vertical Axis Eolic Turbine with Articulated Blades [Volume 15, Issue 2, 2022, Pages 603-615]
-
Franco, c. s.
Velocity Gradient Optimization in a Perforated Tray-Type Flocculator using OpenFOAM: CFD as a Tool in Water Treatment [Volume 15, Issue 2, 2022, Pages 387-397]
-
Freire, E. R. C. G.
Velocity Gradient Optimization in a Perforated Tray-Type Flocculator using OpenFOAM: CFD as a Tool in Water Treatment [Volume 15, Issue 2, 2022, Pages 387-397]
-
Fu, S.
Experimental Investigation on Flow Characteristics in a Turbine Rotor-Stator Cavity with Inlet at Low Radius [Volume 15, Issue 1, 2022, Pages 73-84]
G
-
Galván González, S.
Novel Induction Blade Design for Horizontal Axis Wind Turbines to Improve Starting Phase: CFD and Testing Analysis [Volume 15, Issue 6, 2022, Pages 1635-1648]
-
Gao, S. Q.
Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method [Volume 15, Issue 1, 2022, Pages 221-230]
-
Gao, S. Q.
Erosion Behaviors of Gas–Solid Flow on an Assignment Plate using CFD–DEM [Volume 15, Issue 5, 2022, Pages 1609-1620]
-
Ge, G.
Experimental Research of Two-phase Rotating Detonation Combustor Operating with High Total Temperature Air [Volume 15, Issue 5, 2022, Pages 1437-1449]
-
Geng, C.
Improved Multicomponent Multiphase Lattice Boltzmann Model for Physical Foaming Simulation [Volume 15, Issue 4, 2022, Pages 1125-1136]
-
Ghasemi, B.
Simulation of Variable Magnetic Field Effect on Natural Convection Heat Transfer of Fe3O4/Graphite Slurry based on Experimental Properties of Slurries [Volume 15, Issue 1, 2022, Pages 1-14]
-
Ghenaim, A.
Effects of Different Shaped Cavities and Bumps on Flow Structure and Wing Performance [Volume 15, Issue 6, 2022, Pages 1649-1660]
-
Giri, A.
Thermo-Hydraulic Analysis of Slightly Inclined Finned Channel under Natural Convection [Volume 15, Issue 4, 2022, Pages 985-998]
-
Gong, R. Z.
A Choking Cavitation Method and Equipment for Degrading Pollutants in Wastewater [Volume 15, Issue 1, 2022, Pages 245-253]
-
Gong, Z.
Numerical Study of Combined Drag Reduction Bases on Vortex Generators and Riblets for the Ahmed Body using IDDES Methodology [Volume 15, Issue 1, 2022, Pages 193-207]
-
Goodarzi, M.
Stabilizing a Laminar Flow over a Rectangular Cylinder using Two Small Rotating Cylinders [Volume 15, Issue 1, 2022, Pages 169-178]
-
Gu, X.
Self-Turning Process and Aerodynamic Characteristics of Slender Bodies with Different Center-of-Gravity Positions [Volume 15, Issue 4, 2022, Pages 1281-1289]
-
Gu, Y. J.
Gas-Solid Erosion Study of Elbow Pipe based on Erosion Dynamic Grid Technology [Volume 15, Issue 6, 2022, Pages 1837-1850]
-
Gui, L.
Influence of a Wavy Blade-End Applied in an Axial Compressor Cascade on the Secondary Flow of the Passage [Volume 15, Issue 4, 2022, Pages 1255-1268]
-
Guo, J.
A General Approach for Flow Optimization and Drag Reduction in Turbulent Pipe Flows [Volume 15, Issue 3, 2022, Pages 815-829]
-
Guo, Y. Z.
Flow Characteristics of a Dual-Intake Port Diesel Engine with Guide Vanes [Volume 15, Issue 3, 2022, Pages 709-722]
H
-
Hafidz Hafidzuddin, M. E.
Mixed Convection Magnetic Nanofluid Flow past a Rotating Vertical Porous Cone [Volume 15, Issue 4, 2022, Pages 1207-1220]
-
Hajialimohammadi, A.
Multi-objective Optimization and Sensitivity Analysis of the Parameters Affecting Sealing Performance of the Piston Rings Face through the Validated Model for the Four-stroke Bi-fuel Engine [Volume 15, Issue 5, 2022, Pages 1345-1360]
-
Hajinezhad, A.
Investigating the Effects of Tip Modification on High-Frequency Noise Emission of CART II Wind Turbine using a Hybrid Computational Aeroacoustic Approach [Volume 15, Issue 4, 2022, Pages 973-984]
-
Hamane, D.
A CFD Study of the Effects of Slots on Energy Harvesting from Flow-Induced Circular Cylinder Vibrations [Volume 15, Issue 5, 2022, Pages 1581-1591]
-
Hamlaoui, M. N.
Improved Stall Delay Model for HAWT Performance Predictions using 3D Navier-Stokes Solver and Actuator Disk Method [Volume 15, Issue 1, 2022, Pages 37-50]
-
Han, J.
Numerical Analysis and Optimal CFD Model Verification of Piezoelectric Inkjet Printhead [Volume 15, Issue 4, 2022, Pages 1087-1097]
-
Han, X.
Very-Large-Eddy Simulation of Nonreactive Turbulent Flow for Annular Trapped Vortex Combustor [Volume 15, Issue 2, 2022, Pages 523-535]
-
Han, Z.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Harbi Monfared, R.
Aerodynamic and Aeroacoustic Performance of a Wing with Structured Surface Inspired by Owl’s Wings [Volume 15, Issue 4, 2022, Pages 1243-1253]
-
Hasanah, L.
A Passive Micromixer with Koch Snowflakes Fractal Obstacle in Microchannel [Volume 15, Issue 5, 2022, Pages 1333-1344]
-
Hasani, M.
Computational Investigation of Effects of Side-Injection Geometry on Thrust-Vectoring Performance in a Fuel-Injected Dual Throat Nozzle [Volume 15, Issue 4, 2022, Pages 1137-1153]
-
Hassani, M.
Triple-Nozzle Thermo-Compressor: Geometrical Investigation and Comparison with Single-Nozzle Thermo-Compressor [Volume 15, Issue 6, 2022, Pages 1693-1702]
-
He, Q.
Study on Flow Boiling Heat Transfer in Segmented Internally-Threaded Tube [Volume 15, Issue 5, 2022, Pages 1417-1426]
-
He, X.
Very-Large-Eddy Simulation of Nonreactive Turbulent Flow for Annular Trapped Vortex Combustor [Volume 15, Issue 2, 2022, Pages 523-535]
-
He, Z.
Multi-Objective Aerodynamic Optimization of a High-Speed Train Head Shape Based on an Optimal Kriging Model [Volume 15, Issue 3, 2022, Pages 803-813]
-
He, Z.
A General Approach for Flow Optimization and Drag Reduction in Turbulent Pipe Flows [Volume 15, Issue 3, 2022, Pages 815-829]
-
Hong, J. G.
Effect of Electrical Conductivity on Atomization Characteristics of Electrospray [Volume 15, Issue 5, 2022, Pages 1427-1436]
-
Hu, J. B.
Hydraulic Optimization and Experimental Measurement of Low Specific Speed Centrifugal Fire Pump [Volume 15, Issue 5, 2022, Pages 1477-1489]
-
Hu, J. P.
Effects of High-Order Nonlinearities on Freak Wave Generation in Random Sea States [Volume 15, Issue 4, 2022, Pages 1221-1229]
-
Hu, W. J.
Numerical Study on the Effect of Jet on the Operation of Powder Fuel Scramjet [Volume 15, Issue 1, 2022, Pages 117-127]
-
Hu, Y.
Numerical Study of Combined Drag Reduction Bases on Vortex Generators and Riblets for the Ahmed Body using IDDES Methodology [Volume 15, Issue 1, 2022, Pages 193-207]
-
Hua, L.
A Spraying Model of Non-atomizing Sprinkler based on Jet Fragmentation [Volume 15, Issue 5, 2022, Pages 1491-1501]
-
Huang, Q.
Research on the Modified Mathematical Prediction Model of Impeller Cover Side Cavity Liquid Pressure for Centrifugal Pumps [Volume 15, Issue 3, 2022, Pages 673-685]
-
Huang, Y.
Enhancing Pool Boiling Heat Transfer by Structured Surfaces– A Lattice Boltzmann Study [Volume 15, Issue 1, 2022, Pages 139-151]
-
Huang, Z.
Energy Evolution Mechanism of Air Shock Wave Propagation and Attenuation Based on VMD–HT Energy Spectrum [Volume 15, Issue 4, 2022, Pages 1049-1059]
-
Hudson Dharmaraj, P. V.
Thermo-Fluid Analysis on the Efficiency of Wet Compression Process [Volume 15, Issue 4, 2022, Pages 1061-1071]
I
-
Ismail, K. A. R.
Analysis and Reduction of the Sloshing Phenomena Due To Sudden Movement of Spray Mixture Tanker [Volume 15, Issue 2, 2022, Pages 399-413]
-
Iyer, D. K. Krishna
Physical Reasoning of Double- to Single-Loop Transition in Industrial Reactors using Computational Fluid Dynamics [Volume 15, Issue 5, 2022, Pages 1621-1634]
J
-
Jahani, Z.
Using Tip Injection to Stability Enhancement of a Transonic Centrifugal Impeller with Inlet Distortion [Volume 15, Issue 6, 2022, Pages 1815-1824]
-
James, J. K.
Flow Characteristics of a Mixed Compression Hypersonic Intake [Volume 15, Issue 3, 2022, Pages 633-644]
-
Jana, T.
Shock-Structure Formation in Circular and Non-Circular Sonic Jets at Underexpanded Conditions [Volume 15, Issue 6, 2022, Pages 1913-1921]
-
Jayavel, S.
Performance Improvement in Savonius Wind Turbine by Modification of Blade Shape [Volume 15, Issue 1, 2022, Pages 99-107]
-
Jia, H. W.
Study on Flow Boiling Heat Transfer in Segmented Internally-Threaded Tube [Volume 15, Issue 5, 2022, Pages 1417-1426]
-
Jia, X.
Energy Evolution Mechanism of Air Shock Wave Propagation and Attenuation Based on VMD–HT Energy Spectrum [Volume 15, Issue 4, 2022, Pages 1049-1059]
-
Jian, J.
Numerical Study of Combined Drag Reduction Bases on Vortex Generators and Riblets for the Ahmed Body using IDDES Methodology [Volume 15, Issue 1, 2022, Pages 193-207]
-
Jiang, H.
Self-Turning Process and Aerodynamic Characteristics of Slender Bodies with Different Center-of-Gravity Positions [Volume 15, Issue 4, 2022, Pages 1281-1289]
-
Jiang, M.
Influence of Axial Position of Self-Circulating Casing Treatment on the Performances of a Centrifugal Pump at Low Mass Flow Conditions [Volume 15, Issue 3, 2022, Pages 697-708]
-
Jiang, Y.
A Spraying Model of Non-atomizing Sprinkler based on Jet Fragmentation [Volume 15, Issue 5, 2022, Pages 1491-1501]
-
Jiao, J. H.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Jin, H.
CFD-DEM-based Numerical Simulation of Erosion Characteristic of Multistage Pressure Relief String Regulating Valve [Volume 15, Issue 4, 2022, Pages 999-1015]
-
Jin, H. Z.
Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method [Volume 15, Issue 1, 2022, Pages 221-230]
-
Jin, H. Z.
Erosion Behaviors of Gas–Solid Flow on an Assignment Plate using CFD–DEM [Volume 15, Issue 5, 2022, Pages 1609-1620]
-
Jin, J.
Study on Suppression of Combustion Instability using Quarter Wavelength Tube [Volume 15, Issue 6, 2022, Pages 1923-1931]
-
Jin, Y.
Very-Large-Eddy Simulation of Nonreactive Turbulent Flow for Annular Trapped Vortex Combustor [Volume 15, Issue 2, 2022, Pages 523-535]
-
Johnson, J.
Artificial Neural Network- Genetic Algorithm based Optimization of Baffle Assisted Jet Array Impingement Cooling with Cross-Flow [Volume 15, Issue 2, 2022, Pages 441-451]
K
-
Kamangar, S.
Influence of Multi Stenosis on Hemodynamic Parameters in an Idealized Coronary Artery Model [Volume 15, Issue 1, 2022, Pages 15-23]
-
Kanfoudi, H.
Numerical Prediction Approach of Cavitation Erosion based on 3D Simulation Flow [Volume 15, Issue 4, 2022, Pages 1165-1177]
-
Kang, C.
Cavitation Characteristics during Startup Process of a Condensate Pump with Splitter Blades [Volume 15, Issue 4, 2022, Pages 1099-1109]
-
Kang, W.
Numerical Investigation on Torsional Mode Self-Excited Vibration of Guide Vane in a Reversible Pump-Turbine during Pump Mode’s Starting Up [Volume 15, Issue 6, 2022, Pages 1789-1799]
-
Kasmani, R. Md.
Thermal Enhancement Effects of Buoyancy-Driven Heat Transfer of Hybrid Nanofluid Confined in a Tilted U-Shaped Cavity [Volume 15, Issue 2, 2022, Pages 337-348]
-
Kaushik, M.
Shock-Structure Formation in Circular and Non-Circular Sonic Jets at Underexpanded Conditions [Volume 15, Issue 6, 2022, Pages 1913-1921]
-
Khaleghi, H.
Using Tip Injection to Stability Enhancement of a Transonic Centrifugal Impeller with Inlet Distortion [Volume 15, Issue 6, 2022, Pages 1815-1824]
-
Kharghani, M.
Turbulence Structures in Accelerated Flow over a Flat Plate with Non-Zero Pressure Gradient [Volume 15, Issue 2, 2022, Pages 311-324]
-
Khashi’ie, N. S.
Mixed Convection Magnetic Nanofluid Flow past a Rotating Vertical Porous Cone [Volume 15, Issue 4, 2022, Pages 1207-1220]
-
Khirennas, M.
Mechanism of Vortices Appearance in the Taylor-Couette Flow System [Volume 15, Issue 1, 2022, Pages 129-137]
-
Khoshkhoo, R.
Numerical Study of Stream-wise and Span-wise Nanosecond DBD Plasma Actuators Effects on Supersonic Flow Separation [Volume 15, Issue 4, 2022, Pages 1035-1047]
-
Khosroabadi, A. A.
On Accuracy of Lattice Boltzmann Method Coupled with Cahn-Hilliard and Allen-Cahn Equations for Simulation of Multiphase Flows at High-Density Ratios [Volume 15, Issue 6, 2022, Pages 1771-1787]
-
Kiani, M. J.
Analytical and Numerical Investigation of Non-Newtonian Droplet Breakup in Asymmetric T-junction [Volume 15, Issue 2, 2022, Pages 491-503]
-
Kibar, A.
Experimental and Numerical Investigation of Fluid Flow in Hydraulic Filters [Volume 15, Issue 2, 2022, Pages 363-371]
-
Kibar, A.
A Liquid Jet Impinging onto Rotating Convex Superhydrophobic and Hydrophilic Surfaces: Reflection or Deflection? [Volume 15, Issue 6, 2022, Pages 1881-1888]
-
Kim, H. D.
Flow Characteristics of a Mixed Compression Hypersonic Intake [Volume 15, Issue 3, 2022, Pages 633-644]
-
Kim, H. D.
Thermo-Fluid Analysis on the Efficiency of Wet Compression Process [Volume 15, Issue 4, 2022, Pages 1061-1071]
-
Kim, H. H.
A Study on Booster Pump System with Flow Sensor for Individual Flow Control Method [Volume 15, Issue 3, 2022, Pages 889-900]
-
Kim, J. Y.
Effect of Electrical Conductivity on Atomization Characteristics of Electrospray [Volume 15, Issue 5, 2022, Pages 1427-1436]
-
Kim, K. W.
A Study on Booster Pump System with Flow Sensor for Individual Flow Control Method [Volume 15, Issue 3, 2022, Pages 889-900]
-
Kim, T. H.
Thermo-Fluid Analysis on the Efficiency of Wet Compression Process [Volume 15, Issue 4, 2022, Pages 1061-1071]
-
Korkmaz, Y. S.
Experimental and Numerical Investigation of Fluid Flow in Hydraulic Filters [Volume 15, Issue 2, 2022, Pages 363-371]
-
Kouhikamali, R.
Triple-Nozzle Thermo-Compressor: Geometrical Investigation and Comparison with Single-Nozzle Thermo-Compressor [Volume 15, Issue 6, 2022, Pages 1693-1702]
-
Kui, H. L.
Flow Characteristics of a Dual-Intake Port Diesel Engine with Guide Vanes [Volume 15, Issue 3, 2022, Pages 709-722]
-
Kumar, J.
CFD Investigation for Surface Roughness Effects on the Hydrodynamics of Cavitating Turbulent Flow through a Low Head Prototype Francis Turbine [Volume 15, Issue 5, 2022, Pages 1593-1607]
-
Kurian, S.
Artificial Neural Network- Genetic Algorithm based Optimization of Baffle Assisted Jet Array Impingement Cooling with Cross-Flow [Volume 15, Issue 2, 2022, Pages 441-451]
-
Kurtulus, D. F.
Critical Angle and Fundamental Frequency of Symmetric Airfoils at Low Reynolds Numbers [Volume 15, Issue 3, 2022, Pages 723-735]
-
Kwarteng, A. A.
Effects of Turbulence Models on Flow Characteristics of a Vertical Fire Pump [Volume 15, Issue 6, 2022, Pages 1661-1674]
L
-
Laghouati, Y.
Axial Flow Effect on the Stability of Circular Couette Flow [Volume 15, Issue 1, 2022, Pages 271-281]
-
Lai, L.
Effects of Turbulence Models on Flow Characteristics of a Vertical Fire Pump [Volume 15, Issue 6, 2022, Pages 1661-1674]
-
Le, A. D.
Improvement of Mass Transfer Rate Modeling for Prediction of Cavitating Flow [Volume 15, Issue 2, 2022, Pages 551-561]
-
Lecic, M.
Numerical Study of the L/D Ratio and Turbulent Prandtl Number Effect on Energy Separation in a Counter-Flow Vortex Tube [Volume 15, Issue 5, 2022, Pages 1503-1511]
-
Lei, J.
Enhancing Pool Boiling Heat Transfer by Structured Surfaces– A Lattice Boltzmann Study [Volume 15, Issue 1, 2022, Pages 139-151]
-
Lei, T.
Numerical Analysis and Optimal CFD Model Verification of Piezoelectric Inkjet Printhead [Volume 15, Issue 4, 2022, Pages 1087-1097]
-
Levin, J.
Flow Structure Investigation of a Truck under Crosswinds [Volume 15, Issue 5, 2022, Pages 1513-1523]
-
Li, B.
Analysis on the Performances of Misaligned Journal Bearings using Full-Scale Test Rig and Conjugate Heat Transfer Method [Volume 15, Issue 3, 2022, Pages 747-756]
-
Li, C. X.
Effect of Contact Angle Hysteresis on Evaporation Dynamics of a Sessile Drop on a Heated Surface [Volume 15, Issue 5, 2022, Pages 1361-1376]
-
Li, D.
Self-similarity Characteristics of Vertical Axis Wind Turbine Wakes [Volume 15, Issue 4, 2022, Pages 1155-1164]
-
Li, F.
Numerical Analysis of the Effect of the Non-Sinusoidal Trajectories on the Propulsive Performance of a Bionic Hydrofoil [Volume 15, Issue 3, 2022, Pages 917-925]
-
Li, F.
Influence of a Wavy Blade-End Applied in an Axial Compressor Cascade on the Secondary Flow of the Passage [Volume 15, Issue 4, 2022, Pages 1255-1268]
-
Li, G.
Numerical Investigation on Aerodynamic Drag and Noise of Pantographs with Modified Structures [Volume 15, Issue 2, 2022, Pages 617-631]
-
Li, G.
Numerical Analysis of the Effect of the Non-Sinusoidal Trajectories on the Propulsive Performance of a Bionic Hydrofoil [Volume 15, Issue 3, 2022, Pages 917-925]
-
Li, H.
A Spraying Model of Non-atomizing Sprinkler based on Jet Fragmentation [Volume 15, Issue 5, 2022, Pages 1491-1501]
-
Li, J.
Experimental and Numerical Research on the Formation Conditions and Entrainment Characteristics of Supercavity by Rear Jet Reflux [Volume 15, Issue 1, 2022, Pages 293-309]
-
Li, J.
Comparison of the Models for Multiscale Elastohydrodynamic Lubrication in a Line Contact [Volume 15, Issue 2, 2022, Pages 515-521]
-
Li, J.
Dynamics of Particle-Laden Wake Flow in a Karman Vortex Street Considering the Droplet-Vortex Interactions [Volume 15, Issue 3, 2022, Pages 857-872]
-
Li, J.
Experimental Studies on Suppression of Combustion Instability with the Addition of Helium [Volume 15, Issue 6, 2022, Pages 1703-1715]
-
Li, L.
Most Suitable Blade Inclination Angle for Multiphase Flow in Soybean Milk Machine [Volume 15, Issue 2, 2022, Pages 349-361]
-
Li, L.
Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces [Volume 15, Issue 3, 2022, Pages 843-855]
-
Li, Q.
Analysis on the Performances of Misaligned Journal Bearings using Full-Scale Test Rig and Conjugate Heat Transfer Method [Volume 15, Issue 3, 2022, Pages 747-756]
-
Li, Q. Q.
Gas-Solid Erosion Study of Elbow Pipe based on Erosion Dynamic Grid Technology [Volume 15, Issue 6, 2022, Pages 1837-1850]
-
Li, S.
Numerical Analysis of the Effect of Streamlined Nose Length on Slipstream of High-Speed Train Passing through a Tunnel [Volume 15, Issue 6, 2022, Pages 1933-1945]
-
Li, S. H.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Li, T.
On the Scale Size of the Aerodynamic Characteristics of a High-Speed Train [Volume 15, Issue 1, 2022, Pages 209-219]
-
Li, W.
Enhancing Pool Boiling Heat Transfer by Structured Surfaces– A Lattice Boltzmann Study [Volume 15, Issue 1, 2022, Pages 139-151]
-
Li, W.
Investigation of Isothermal Flow inside a New Combustor with Two-Stage Axial Swirler [Volume 15, Issue 2, 2022, Pages 325-336]
-
Li, W. K.
Experimental Study on Breakup and Transition of a Rotating Liquid Jet [Volume 15, Issue 3, 2022, Pages 757-765]
-
Li, X.
Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces [Volume 15, Issue 3, 2022, Pages 843-855]
-
Li, X.
Numerical Analysis of the Effect of Streamlined Nose Length on Slipstream of High-Speed Train Passing through a Tunnel [Volume 15, Issue 6, 2022, Pages 1933-1945]
-
Li, Y.
Influence of Axial Position of Self-Circulating Casing Treatment on the Performances of a Centrifugal Pump at Low Mass Flow Conditions [Volume 15, Issue 3, 2022, Pages 697-708]
-
Li, Y.
Numerical Investigation of Flow Characteristics in a Centrifugal Pump Impeller with Sinusoidal Flow Rates of Different Oscillation Amplitudes [Volume 15, Issue 6, 2022, Pages 1869-1879]
-
Li, Y. H.
Self-similarity Characteristics of Vertical Axis Wind Turbine Wakes [Volume 15, Issue 4, 2022, Pages 1155-1164]
-
Li, Y. J.
Experimental and Numerical Investigation of Stall Mechanism in Centrifugal Pump Impeller [Volume 15, Issue 3, 2022, Pages 927-941]
-
Li, Z.
Self-similarity Characteristics of Vertical Axis Wind Turbine Wakes [Volume 15, Issue 4, 2022, Pages 1155-1164]
-
Li, Z.
A Data-Based Policy Model for Intelligent Turbine Cascade Design [Volume 15, Issue 4, 2022, Pages 1179-1192]
-
Liang, Q.
Numerical Investigation on Torsional Mode Self-Excited Vibration of Guide Vane in a Reversible Pump-Turbine during Pump Mode’s Starting Up [Volume 15, Issue 6, 2022, Pages 1789-1799]
-
Liang, X. D.
Flow and Heat Transfer in a Co-Rotating Cavity with Tubes: A Coupled Prediction Model [Volume 15, Issue 5, 2022, Pages 1403-1416]
-
Liang, Y.
Influence of Blade Lean on Performance and Shock Wave/Tip Leakage Flow Interaction in a Transonic Compressor Rotor [Volume 15, Issue 1, 2022, Pages 153-167]
-
Liao, H. B.
A Comparative Study of the Buoyancy-Opposed Wall Jet using Different Turbulent Models [Volume 15, Issue 1, 2022, Pages 85-98]
-
Liao, Z. Y.
Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method [Volume 15, Issue 1, 2022, Pages 221-230]
-
Lim, H.
Numerical Investigation of the Influence of Microchannel Geometry on the Droplet Generation Process [Volume 15, Issue 5, 2022, Pages 1291-1305]
-
Lim, H. Y.
Injection Properties According to the Inner Shape of Metal Additive Layer Manufactured Coaxial Injectors [Volume 15, Issue 4, 2022, Pages 1231-1241]
-
Lin, A.
Method of Improving Stability of a Highly-Loaded Axial Compressor Stage by Coupling Different Casing Treatments [Volume 15, Issue 3, 2022, Pages 645-657]
-
Lin, G.
Improved Multicomponent Multiphase Lattice Boltzmann Model for Physical Foaming Simulation [Volume 15, Issue 4, 2022, Pages 1125-1136]
-
Lin, P.
Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces [Volume 15, Issue 3, 2022, Pages 843-855]
-
Lin, T. H.
Experimental Study on Breakup and Transition of a Rotating Liquid Jet [Volume 15, Issue 3, 2022, Pages 757-765]
-
Lin, W.
Comparison of the Models for Multiscale Elastohydrodynamic Lubrication in a Line Contact [Volume 15, Issue 2, 2022, Pages 515-521]
-
Liu, B.
Influence of Blade Lean on Performance and Shock Wave/Tip Leakage Flow Interaction in a Transonic Compressor Rotor [Volume 15, Issue 1, 2022, Pages 153-167]
-
Liu, B.
Experimental and Numerical Research on the Formation Conditions and Entrainment Characteristics of Supercavity by Rear Jet Reflux [Volume 15, Issue 1, 2022, Pages 293-309]
-
Liu, B.
Research on the Influence of Inflow Conditions on the Aerodynamic Performance of a Tandem Cascade [Volume 15, Issue 6, 2022, Pages 1745-1758]
-
Liu, C.
Self-Turning Process and Aerodynamic Characteristics of Slender Bodies with Different Center-of-Gravity Positions [Volume 15, Issue 4, 2022, Pages 1281-1289]
-
Liu, C.
Study on Suppression of Combustion Instability using Quarter Wavelength Tube [Volume 15, Issue 6, 2022, Pages 1923-1931]
-
Liu, D. J.
Liquid Film Condensation behind Shock Waves on the Cold Wall of a Diaphragmless Vertical Shock Tube: An Experimental Study [Volume 15, Issue 3, 2022, Pages 781-791]
-
Liu, F.
Improved Multicomponent Multiphase Lattice Boltzmann Model for Physical Foaming Simulation [Volume 15, Issue 4, 2022, Pages 1125-1136]
-
Liu, H.
A Choking Cavitation Method and Equipment for Degrading Pollutants in Wastewater [Volume 15, Issue 1, 2022, Pages 245-253]
-
Liu, H.
Influence of Axial Position of Self-Circulating Casing Treatment on the Performances of a Centrifugal Pump at Low Mass Flow Conditions [Volume 15, Issue 3, 2022, Pages 697-708]
-
Liu, H.
Numerical Analysis and Optimal CFD Model Verification of Piezoelectric Inkjet Printhead [Volume 15, Issue 4, 2022, Pages 1087-1097]
-
Liu, H. L.
Effect of Volute Geometry on Radial Force Characteristics of Centrifugal Pump during Startup [Volume 15, Issue 1, 2022, Pages 25-36]
-
Liu, H. L.
Numerical Study on Cubic Particle Solid–Liquid Two-Phase Flow in Multistage Pump [Volume 15, Issue 5, 2022, Pages 1377-1386]
-
Liu, H. L.
Hydraulic Optimization and Experimental Measurement of Low Specific Speed Centrifugal Fire Pump [Volume 15, Issue 5, 2022, Pages 1477-1489]
-
Liu, H. P.
CPFD Simulation of Gas-Solid Flow in Dense Phase Zone of Pant-Leg Fluidized Bed with Secondary Air [Volume 15, Issue 5, 2022, Pages 1319-1331]
-
Liu, L. W.
Influence Rule of Projectile Density on the Characteristics of High-Speed Water-Entry Cavity [Volume 15, Issue 6, 2022, Pages 1901-1912]
-
Liu, Q. L.
Analysis on the Performances of Misaligned Journal Bearings using Full-Scale Test Rig and Conjugate Heat Transfer Method [Volume 15, Issue 3, 2022, Pages 747-756]
-
Liu, X. D.
Experimental and Numerical Investigation of Stall Mechanism in Centrifugal Pump Impeller [Volume 15, Issue 3, 2022, Pages 927-941]
-
Liu, X. F.
Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method [Volume 15, Issue 1, 2022, Pages 221-230]
-
Liu, Y.
Flow Characteristics of a Dual-Intake Port Diesel Engine with Guide Vanes [Volume 15, Issue 3, 2022, Pages 709-722]
-
Liu, Y.
A Data-Based Policy Model for Intelligent Turbine Cascade Design [Volume 15, Issue 4, 2022, Pages 1179-1192]
-
Liu, Y.
Experimental Studies on Suppression of Combustion Instability with the Addition of Helium [Volume 15, Issue 6, 2022, Pages 1703-1715]
-
Liu, Y.
Study on Suppression of Combustion Instability using Quarter Wavelength Tube [Volume 15, Issue 6, 2022, Pages 1923-1931]
-
Liu, Z.
Research on Thrust Calibration Technology of Aeroengine Indoor Test Bench [Volume 15, Issue 1, 2022, Pages 109-116]
-
Liu, Z.
Numerical Study of Combined Drag Reduction Bases on Vortex Generators and Riblets for the Ahmed Body using IDDES Methodology [Volume 15, Issue 1, 2022, Pages 193-207]
-
Liu, Z. L.
Research on the Modified Mathematical Prediction Model of Impeller Cover Side Cavity Liquid Pressure for Centrifugal Pumps [Volume 15, Issue 3, 2022, Pages 673-685]
-
Liu, Z. Q.
Experimental and Numerical Investigation of Stall Mechanism in Centrifugal Pump Impeller [Volume 15, Issue 3, 2022, Pages 927-941]
-
López Garza, V.
Novel Induction Blade Design for Horizontal Axis Wind Turbines to Improve Starting Phase: CFD and Testing Analysis [Volume 15, Issue 6, 2022, Pages 1635-1648]
-
Long, H.
A Choking Cavitation Method and Equipment for Degrading Pollutants in Wastewater [Volume 15, Issue 1, 2022, Pages 245-253]
-
Lou, H.
Multi-Objective Optimization of Aerodynamic Performance for a Small Single-Stage Turbine [Volume 15, Issue 5, 2022, Pages 1451-1463]
-
Lu, C.
Cavitation Characteristics during Startup Process of a Condensate Pump with Splitter Blades [Volume 15, Issue 4, 2022, Pages 1099-1109]
-
Lu, S.
Influence of Axial Position of Self-Circulating Casing Treatment on the Performances of a Centrifugal Pump at Low Mass Flow Conditions [Volume 15, Issue 3, 2022, Pages 697-708]
-
Lu, X.
Hydraulic Optimization and Experimental Measurement of Low Specific Speed Centrifugal Fire Pump [Volume 15, Issue 5, 2022, Pages 1477-1489]
-
Lu, X. G.
Experimental Study on Cooling Efficiency of Hypersonic Optical Window [Volume 15, Issue 1, 2022, Pages 63-72]
-
Luan, Y.
Research on Thrust Calibration Technology of Aeroengine Indoor Test Bench [Volume 15, Issue 1, 2022, Pages 109-116]
-
Lui, P.
Liquid Film Condensation behind Shock Waves on the Cold Wall of a Diaphragmless Vertical Shock Tube: An Experimental Study [Volume 15, Issue 3, 2022, Pages 781-791]
-
Luo, J.
Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan [Volume 15, Issue 3, 2022, Pages 901-916]
-
Luo, K.
A General Approach for Flow Optimization and Drag Reduction in Turbulent Pipe Flows [Volume 15, Issue 3, 2022, Pages 815-829]
-
Luo, M. H.
Gas-Solid Erosion Study of Elbow Pipe based on Erosion Dynamic Grid Technology [Volume 15, Issue 6, 2022, Pages 1837-1850]
M
-
Ma, C.
Drag Reduction Characteristics of Bionic Structure Composed of Grooves and Mucous Membrane Acting on Turbulent Boundary Layer [Volume 15, Issue 1, 2022, Pages 283-292]
-
Ma, H.
Experimental Research of Two-phase Rotating Detonation Combustor Operating with High Total Temperature Air [Volume 15, Issue 5, 2022, Pages 1437-1449]
-
Ma, H. C.
Numerical Study on Cubic Particle Solid–Liquid Two-Phase Flow in Multistage Pump [Volume 15, Issue 5, 2022, Pages 1377-1386]
-
Ma, S.
Influence of a Wavy Blade-End Applied in an Axial Compressor Cascade on the Secondary Flow of the Passage [Volume 15, Issue 4, 2022, Pages 1255-1268]
-
Ma, Y.
Experimental Research of Two-phase Rotating Detonation Combustor Operating with High Total Temperature Air [Volume 15, Issue 5, 2022, Pages 1437-1449]
-
Ma, Z.
A Delayed Detached Eddy Simulation Model for the Simulation of Complex Turbulent Flow [Volume 15, Issue 4, 2022, Pages 1111-1124]
-
Maddahian, R.
An LES-Like Multiscale Multiphase Flow Model Based on Break-up and Coalescence Phenomena [Volume 15, Issue 4, 2022, Pages 1073-1085]
-
Madhuri, M.
Parametric Investigation of Closed Loop Pulsating Heat Pipe with Cerium Oxide Nanofluid [Volume 15, Issue 6, 2022, Pages 1717-1727]
-
Mahboub, A.
Effects of Different Shaped Cavities and Bumps on Flow Structure and Wing Performance [Volume 15, Issue 6, 2022, Pages 1649-1660]
-
Mahdi, M.
Unsteady Fluid Flow Analysis of Tongue Geometry in a Centrifugal Pump at Design and Off-design Conditions [Volume 15, Issue 6, 2022, Pages 1851-1867]
-
Mahfoud, B.
Stability of an Electrically Conducting Fluid Flow between Coaxial Cylinders under Magnetic field [Volume 15, Issue 2, 2022, Pages 563-577]
-
Maizi, M.
A CFD Study of the Effects of Slots on Energy Harvesting from Flow-Induced Circular Cylinder Vibrations [Volume 15, Issue 5, 2022, Pages 1581-1591]
-
Mao, X.
Research on the Influence of Inflow Conditions on the Aerodynamic Performance of a Tandem Cascade [Volume 15, Issue 6, 2022, Pages 1745-1758]
-
Martins, M. A.
Natural Convection and Radiation in Enclosures with Semi-transparent Medium: Conjugate CFD Analysis [Volume 15, Issue 5, 2022, Pages 1307-1318]
-
Md Arifin, N.
Mixed Convection Magnetic Nanofluid Flow past a Rotating Vertical Porous Cone [Volume 15, Issue 4, 2022, Pages 1207-1220]
-
Mehrabivaghar, M.
Multi-objective Optimization and Sensitivity Analysis of the Parameters Affecting Sealing Performance of the Piston Rings Face through the Validated Model for the Four-stroke Bi-fuel Engine [Volume 15, Issue 5, 2022, Pages 1345-1360]
-
Mekadem, M.
Mechanism of Vortices Appearance in the Taylor-Couette Flow System [Volume 15, Issue 1, 2022, Pages 129-137]
-
Melo, P. A.
Velocity Gradient Optimization in a Perforated Tray-Type Flocculator using OpenFOAM: CFD as a Tool in Water Treatment [Volume 15, Issue 2, 2022, Pages 387-397]
-
Meng, B.
Study on Flow Characteristics of Helium Turboexpander with a Novel Intake Structure [Volume 15, Issue 3, 2022, Pages 793-802]
-
Mi, Q.
Experimental Study on Cooling Efficiency of Hypersonic Optical Window [Volume 15, Issue 1, 2022, Pages 63-72]
-
Micheli, G. b.
Analysis and Reduction of the Sloshing Phenomena Due To Sudden Movement of Spray Mixture Tanker [Volume 15, Issue 2, 2022, Pages 399-413]
-
Moghaddam Pour, S.
Experimental Investigation of a Wave-Piercing Trimaran on the Outrigger Configurations in terms of Seakeeping and Added Resistance [Volume 15, Issue 1, 2022, Pages 51-62]
-
Mulyanti, B.
A Passive Micromixer with Koch Snowflakes Fractal Obstacle in Microchannel [Volume 15, Issue 5, 2022, Pages 1333-1344]
N
-
Nagulapati, V. M.
Numerical Investigation of the Influence of Microchannel Geometry on the Droplet Generation Process [Volume 15, Issue 5, 2022, Pages 1291-1305]
-
Nair, M. T.
Optimisation of Trapped Vortex Cavity for Airfoil Separation Control [Volume 15, Issue 1, 2022, Pages 179-191]
-
Najafi, M.
Stabilizing a Laminar Flow over a Rectangular Cylinder using Two Small Rotating Cylinders [Volume 15, Issue 1, 2022, Pages 169-178]
-
Nazarian Shahrbabaki, A.
Numerical Study of Stream-wise and Span-wise Nanosecond DBD Plasma Actuators Effects on Supersonic Flow Separation [Volume 15, Issue 4, 2022, Pages 1035-1047]
-
Nejat, A.
Investigating the Effects of Tip Modification on High-Frequency Noise Emission of CART II Wind Turbine using a Hybrid Computational Aeroacoustic Approach [Volume 15, Issue 4, 2022, Pages 973-984]
-
Nie, C. D.
Effects of Inlet Types and Lengths on the Flow Field of Cyclone Separators [Volume 15, Issue 2, 2022, Pages 591-601]
-
Nie, X.
A Comparative Study of the Buoyancy-Opposed Wall Jet using Different Turbulent Models [Volume 15, Issue 1, 2022, Pages 85-98]
-
Niño Del Río, G. E.
Free and Non-Free Vortex Design for Axial Fans with Circumferential Sweep through CFD Techniques [Volume 15, Issue 4, 2022, Pages 1017-1034]
-
Noroozi, M. M.
An LES-Like Multiscale Multiphase Flow Model Based on Break-up and Coalescence Phenomena [Volume 15, Issue 4, 2022, Pages 1073-1085]
-
Novkovic, D.
Numerical Study of the L/D Ratio and Turbulent Prandtl Number Effect on Energy Separation in a Counter-Flow Vortex Tube [Volume 15, Issue 5, 2022, Pages 1503-1511]
-
Nurvadila, D. F.
A Passive Micromixer with Koch Snowflakes Fractal Obstacle in Microchannel [Volume 15, Issue 5, 2022, Pages 1333-1344]
O
-
Oguz Tasci, M.
Particle Image Velocimetry Investigation of the Flow for the Curved Type Wind Turbine Shroud [Volume 15, Issue 2, 2022, Pages 373-385]
-
Oliveira, L. F. C.
Velocity Gradient Optimization in a Perforated Tray-Type Flocculator using OpenFOAM: CFD as a Tool in Water Treatment [Volume 15, Issue 2, 2022, Pages 387-397]
-
Osman, F. K.
Effects of Turbulence Models on Flow Characteristics of a Vertical Fire Pump [Volume 15, Issue 6, 2022, Pages 1661-1674]
-
Ou, G.
CFD-DEM-based Numerical Simulation of Erosion Characteristic of Multistage Pressure Relief String Regulating Valve [Volume 15, Issue 4, 2022, Pages 999-1015]
-
Ou, G. F.
Erosion Behaviors of Gas–Solid Flow on an Assignment Plate using CFD–DEM [Volume 15, Issue 5, 2022, Pages 1609-1620]
-
Ou, G. F.
Gas-Solid Erosion Study of Elbow Pipe based on Erosion Dynamic Grid Technology [Volume 15, Issue 6, 2022, Pages 1837-1850]
-
Oualli, H.
Mechanism of Vortices Appearance in the Taylor-Couette Flow System [Volume 15, Issue 1, 2022, Pages 129-137]
-
Oualli, H.
Axial Flow Effect on the Stability of Circular Couette Flow [Volume 15, Issue 1, 2022, Pages 271-281]
-
Ozturk, M. S.
Analysis of Thermal and Flow Characteristics in a Combined Cross-Flow and Jet-Flow Configuration with Flow-Guiding Fins [Volume 15, Issue 6, 2022, Pages 1729-1744]
P
-
Padilha, A.
Analysis and Reduction of the Sloshing Phenomena Due To Sudden Movement of Spray Mixture Tanker [Volume 15, Issue 2, 2022, Pages 399-413]
-
Panigrahi, C.
Optimisation of Trapped Vortex Cavity for Airfoil Separation Control [Volume 15, Issue 1, 2022, Pages 179-191]
-
Paramanantham, S. S. S.
Numerical Investigation of the Influence of Microchannel Geometry on the Droplet Generation Process [Volume 15, Issue 5, 2022, Pages 1291-1305]
-
PasandidehFard, M.
Turbulence Structures in Accelerated Flow over a Flat Plate with Non-Zero Pressure Gradient [Volume 15, Issue 2, 2022, Pages 311-324]
-
Patel, A. K.
Physical Reasoning of Double- to Single-Loop Transition in Industrial Reactors using Computational Fluid Dynamics [Volume 15, Issue 5, 2022, Pages 1621-1634]
-
Patel, V. K.
CFD Investigation for Surface Roughness Effects on the Hydrodynamics of Cavitating Turbulent Flow through a Low Head Prototype Francis Turbine [Volume 15, Issue 5, 2022, Pages 1593-1607]
-
Pathak, K. K.
Thermo-Hydraulic Analysis of Slightly Inclined Finned Channel under Natural Convection [Volume 15, Issue 4, 2022, Pages 985-998]
-
Pawinanto, R. E.
A Passive Micromixer with Koch Snowflakes Fractal Obstacle in Microchannel [Volume 15, Issue 5, 2022, Pages 1333-1344]
-
Pishkar, I.
Simulation of Variable Magnetic Field Effect on Natural Convection Heat Transfer of Fe3O4/Graphite Slurry based on Experimental Properties of Slurries [Volume 15, Issue 1, 2022, Pages 1-14]
-
Pop, I.
Mixed Convection Magnetic Nanofluid Flow past a Rotating Vertical Porous Cone [Volume 15, Issue 4, 2022, Pages 1207-1220]
-
Prapamonthon, P.
Numerical Investigation on Aerodynamic Drag and Noise of Pantographs with Modified Structures [Volume 15, Issue 2, 2022, Pages 617-631]
-
Prasad, V.
CFD Investigation for Surface Roughness Effects on the Hydrodynamics of Cavitating Turbulent Flow through a Low Head Prototype Francis Turbine [Volume 15, Issue 5, 2022, Pages 1593-1607]
Q
-
Qin, D.
On the Scale Size of the Aerodynamic Characteristics of a High-Speed Train [Volume 15, Issue 1, 2022, Pages 209-219]
-
Quan, H.
Research on the Modified Mathematical Prediction Model of Impeller Cover Side Cavity Liquid Pressure for Centrifugal Pumps [Volume 15, Issue 3, 2022, Pages 673-685]
R
-
Raisi, A.
Simulation of Variable Magnetic Field Effect on Natural Convection Heat Transfer of Fe3O4/Graphite Slurry based on Experimental Properties of Slurries [Volume 15, Issue 1, 2022, Pages 1-14]
-
Rajasekarababu, K. B.
Evaluation of CFD URANS Turbulence Models for the Building under Environmental Wind Flow with Experimental Validation [Volume 15, Issue 5, 2022, Pages 1387-1401]
-
Rakibuzzaman, M.
A Study on Booster Pump System with Flow Sensor for Individual Flow Control Method [Volume 15, Issue 3, 2022, Pages 889-900]
-
Ramarajan, J.
Performance Improvement in Savonius Wind Turbine by Modification of Blade Shape [Volume 15, Issue 1, 2022, Pages 99-107]
-
Ramezani, M. H.
An LES-Like Multiscale Multiphase Flow Model Based on Break-up and Coalescence Phenomena [Volume 15, Issue 4, 2022, Pages 1073-1085]
-
Ramirez Gustavo, R. G.
Study of the Behavior of a Vertical Axis Eolic Turbine with Articulated Blades [Volume 15, Issue 2, 2022, Pages 603-615]
-
Ramirez Gustavo, R. G.
Free and Non-Free Vortex Design for Axial Fans with Circumferential Sweep through CFD Techniques [Volume 15, Issue 4, 2022, Pages 1017-1034]
-
Rammohan, S.
Flow Estimation by Flow Induced Vibration of Bluff Bodies [Volume 15, Issue 5, 2022, Pages 1465-1476]
-
Rasekh, M.
Unsteady Fluid Flow Analysis of Tongue Geometry in a Centrifugal Pump at Design and Off-design Conditions [Volume 15, Issue 6, 2022, Pages 1851-1867]
-
Ren, H. L.
Experimental Investigation on Flow Characteristics in a Turbine Rotor-Stator Cavity with Inlet at Low Radius [Volume 15, Issue 1, 2022, Pages 73-84]
-
Roy, K.
Thermo-Hydraulic Analysis of Slightly Inclined Finned Channel under Natural Convection [Volume 15, Issue 4, 2022, Pages 985-998]
-
Ruan, C.
Numerical Study on Laminar Drag Reduction for Superhydrophobic Surfaces with Continuous V-Shaped Microstructures [Volume 15, Issue 6, 2022, Pages 1825-1836]
S
-
Saghafian, M.
Optimum Geometric Bifurcation under Pulsating Flow Assuming Minimum Energy Consumption in Cardiovascular System, an Extension on Murray’s Law [Volume 15, Issue 3, 2022, Pages 687-695]
-
Sahin, B.
Particle Image Velocimetry Investigation of the Flow for the Curved Type Wind Turbine Shroud [Volume 15, Issue 2, 2022, Pages 373-385]
-
Sajadi, V.
Unsteady Fluid Flow Analysis of Tongue Geometry in a Centrifugal Pump at Design and Off-design Conditions [Volume 15, Issue 6, 2022, Pages 1851-1867]
-
Saleh, H.
Thermal Enhancement Effects of Buoyancy-Driven Heat Transfer of Hybrid Nanofluid Confined in a Tilted U-Shaped Cavity [Volume 15, Issue 2, 2022, Pages 337-348]
-
Salimi, M. R.
Computational Investigation of Effects of Side-Injection Geometry on Thrust-Vectoring Performance in a Fuel-Injected Dual Throat Nozzle [Volume 15, Issue 4, 2022, Pages 1137-1153]
-
Salmi, M.
Stability of an Electrically Conducting Fluid Flow between Coaxial Cylinders under Magnetic field [Volume 15, Issue 2, 2022, Pages 563-577]
-
Sathyabhama, A.
Numerical Investigation on the Effect of Leading-Edge Tubercles on the Laminar Separation Bubble [Volume 15, Issue 3, 2022, Pages 767-780]
-
Scalon, V. L.
Analysis and Reduction of the Sloshing Phenomena Due To Sudden Movement of Spray Mixture Tanker [Volume 15, Issue 2, 2022, Pages 399-413]
-
Schulz, H. E.
Differential Equation for Turbulence Power Losses and Energy Spectra Based on Consolidated Empirical Results [Volume 15, Issue 4, 2022, Pages 959-972]
-
Seah, K. G.
Cavitation Characteristics during Startup Process of a Condensate Pump with Splitter Blades [Volume 15, Issue 4, 2022, Pages 1099-1109]
-
Seif, M. S.
A Study into Surface-Piercing Propellers at Different Immersion Depths using a Towing Tank and a Numerical Method [Volume 15, Issue 5, 2022, Pages 1545-1562]
-
Selvi Rajan, S.
Evaluation of CFD URANS Turbulence Models for the Building under Environmental Wind Flow with Experimental Validation [Volume 15, Issue 5, 2022, Pages 1387-1401]
-
Sevil Ergur, H.
Multiple Performance Optimization of a Single Stage Centrifugal Pump using an Intelligent System Approach [Volume 15, Issue 4, 2022, Pages 1269-1280]
-
Shang, W.
Energy Evolution Mechanism of Air Shock Wave Propagation and Attenuation Based on VMD–HT Energy Spectrum [Volume 15, Issue 4, 2022, Pages 1049-1059]
-
Shao, A. C.
Research on the Modified Mathematical Prediction Model of Impeller Cover Side Cavity Liquid Pressure for Centrifugal Pumps [Volume 15, Issue 3, 2022, Pages 673-685]
-
Shao, C.
Numerical Study on Cubic Particle Solid–Liquid Two-Phase Flow in Multistage Pump [Volume 15, Issue 5, 2022, Pages 1377-1386]
-
Shao, C. S.
Flow Characteristics of a Dual-Intake Port Diesel Engine with Guide Vanes [Volume 15, Issue 3, 2022, Pages 709-722]
-
Shen, W. J.
Flow and Heat Transfer in a Co-Rotating Cavity with Tubes: A Coupled Prediction Model [Volume 15, Issue 5, 2022, Pages 1403-1416]
-
Shi, H. J.
Effects of Porous Parameters on the Aerodynamic Noise of the Blowing Device of Guardrails [Volume 15, Issue 4, 2022, Pages 1193-1206]
-
Shi, J. W.
Unsteady Numerical Investigation on Vortex Interaction between Rim Seal Purge Flow and Upstream Stator [Volume 15, Issue 2, 2022, Pages 465-474]
-
Shi, J. W.
Investigation on Jet Characteristics of Turbofan Exhaust System under Take-off Condition with High Angle of Attack [Volume 15, Issue 3, 2022, Pages 943-958]
-
Shi, J. W.
Fluid-Structure Interaction Study of the Serpentine Nozzle for Turbofan [Volume 15, Issue 5, 2022, Pages 1563-1580]
-
Shi, Z.
Multi-Objective Aerodynamic Optimization of a High-Speed Train Head Shape Based on an Optimal Kriging Model [Volume 15, Issue 3, 2022, Pages 803-813]
-
Shrotriya, P.
Investigation of Isothermal Flow inside a New Combustor with Two-Stage Axial Swirler [Volume 15, Issue 2, 2022, Pages 325-336]
-
Siri, Z.
Thermal Enhancement Effects of Buoyancy-Driven Heat Transfer of Hybrid Nanofluid Confined in a Tilted U-Shaped Cavity [Volume 15, Issue 2, 2022, Pages 337-348]
-
Sitaram, N.
Effect of Gurney flap Height and Mounting Position on the Performance of a Centrifugal Fan [Volume 15, Issue 1, 2022, Pages 255-269]
-
Smaili, A.
Improved Stall Delay Model for HAWT Performance Predictions using 3D Navier-Stokes Solver and Actuator Disk Method [Volume 15, Issue 1, 2022, Pages 37-50]
-
Sobolik, V.
Axial Flow Effect on the Stability of Circular Couette Flow [Volume 15, Issue 1, 2022, Pages 271-281]
-
Solorio Díaz, G.
Novel Induction Blade Design for Horizontal Axis Wind Turbines to Improve Starting Phase: CFD and Testing Analysis [Volume 15, Issue 6, 2022, Pages 1635-1648]
-
Song, B.
3D Numerical Simulation of a Hovering Hummingbird-inspired Flapping Wing with Dynamic Morphing [Volume 15, Issue 3, 2022, Pages 873-888]
-
Sonkaya, F.
Flow Separation Control on NACA0015 Airfoil Using Synchronized Jet Actuator [Volume 15, Issue 2, 2022, Pages 427-440]
-
Soyhan, H. S.
Investigation of the Smoke Ventilation and Evacuation Strategies to Decrease Smoke Poisoning Risk by Coupling Fire and Evacuation Simulations [Volume 15, Issue 3, 2022, Pages 659-671]
-
Sreejith, B. K.
Numerical Investigation on the Effect of Leading-Edge Tubercles on the Laminar Separation Bubble [Volume 15, Issue 3, 2022, Pages 767-780]
-
Suárez, W. D.
Study of the Behavior of a Vertical Axis Eolic Turbine with Articulated Blades [Volume 15, Issue 2, 2022, Pages 603-615]
-
Subramanian, T.
Shock-Structure Formation in Circular and Non-Circular Sonic Jets at Underexpanded Conditions [Volume 15, Issue 6, 2022, Pages 1913-1921]
-
Suh, S. H.
A Study on Booster Pump System with Flow Sensor for Individual Flow Control Method [Volume 15, Issue 3, 2022, Pages 889-900]
-
Sun, H.
Dynamics of Particle-Laden Wake Flow in a Karman Vortex Street Considering the Droplet-Vortex Interactions [Volume 15, Issue 3, 2022, Pages 857-872]
-
Sun, H. W.
CPFD Simulation of Gas-Solid Flow in Dense Phase Zone of Pant-Leg Fluidized Bed with Secondary Air [Volume 15, Issue 5, 2022, Pages 1319-1331]
-
Sun, P.
Fluid-Structure Interaction Study of the Serpentine Nozzle for Turbofan [Volume 15, Issue 5, 2022, Pages 1563-1580]
-
Sun, Z.
Numerical Investigation on Aerodynamic Drag and Noise of Pantographs with Modified Structures [Volume 15, Issue 2, 2022, Pages 617-631]
-
Suresh, M.
Effect of Gurney flap Height and Mounting Position on the Performance of a Centrifugal Fan [Volume 15, Issue 1, 2022, Pages 255-269]
-
Suryan, A.
Thermo-Fluid Analysis on the Efficiency of Wet Compression Process [Volume 15, Issue 4, 2022, Pages 1061-1071]
-
Suthakar, T.
Flow Estimation by Flow Induced Vibration of Bluff Bodies [Volume 15, Issue 5, 2022, Pages 1465-1476]
T
-
Tabatabaei Malazi, M.
Numerical Modeling of Interactions between Solitary Waves and Floating Breakwaters [Volume 15, Issue 6, 2022, Pages 1675-1691]
-
Tabejamaat, S.
Using Tip Injection to Stability Enhancement of a Transonic Centrifugal Impeller with Inlet Distortion [Volume 15, Issue 6, 2022, Pages 1815-1824]
-
Taeibi Rahni, M.
Aerodynamic and Aeroacoustic Performance of a Wing with Structured Surface Inspired by Owl’s Wings [Volume 15, Issue 4, 2022, Pages 1243-1253]
-
Tamil Chandran, A.
Flow Estimation by Flow Induced Vibration of Bluff Bodies [Volume 15, Issue 5, 2022, Pages 1465-1476]
-
Tan, M. G.
Numerical Study on Cubic Particle Solid–Liquid Two-Phase Flow in Multistage Pump [Volume 15, Issue 5, 2022, Pages 1377-1386]
-
Tang, B. Y.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Tang, Q.
Multi-Objective Optimization of Aerodynamic Performance for a Small Single-Stage Turbine [Volume 15, Issue 5, 2022, Pages 1451-1463]
-
Tata, M.
A CFD Study of the Effects of Slots on Energy Harvesting from Flow-Induced Circular Cylinder Vibrations [Volume 15, Issue 5, 2022, Pages 1581-1591]
-
Teimoori, M.
A Study into Surface-Piercing Propellers at Different Immersion Depths using a Towing Tank and a Numerical Method [Volume 15, Issue 5, 2022, Pages 1545-1562]
-
Thangaraj, T.
Shock-Structure Formation in Circular and Non-Circular Sonic Jets at Underexpanded Conditions [Volume 15, Issue 6, 2022, Pages 1913-1921]
-
Tiago Filho, G. L.
Study of the Behavior of a Vertical Axis Eolic Turbine with Articulated Blades [Volume 15, Issue 2, 2022, Pages 603-615]
-
Tian, Y.
Enhancing Pool Boiling Heat Transfer by Structured Surfaces– A Lattice Boltzmann Study [Volume 15, Issue 1, 2022, Pages 139-151]
-
Tian, Z.
Experimental Studies on Suppression of Combustion Instability with the Addition of Helium [Volume 15, Issue 6, 2022, Pages 1703-1715]
-
Tian, Z.
Study on Suppression of Combustion Instability using Quarter Wavelength Tube [Volume 15, Issue 6, 2022, Pages 1923-1931]
-
Tide, P. S.
Artificial Neural Network- Genetic Algorithm based Optimization of Baffle Assisted Jet Array Impingement Cooling with Cross-Flow [Volume 15, Issue 2, 2022, Pages 441-451]
-
Tiwari, G.
CFD Investigation for Surface Roughness Effects on the Hydrodynamics of Cavitating Turbulent Flow through a Low Head Prototype Francis Turbine [Volume 15, Issue 5, 2022, Pages 1593-1607]
-
Tran, H. T.
Improvement of Mass Transfer Rate Modeling for Prediction of Cavitating Flow [Volume 15, Issue 2, 2022, Pages 551-561]
-
Tu, P. P.
Particle Dynamic Characteristics of the Vertical Tubes in a Horizontal-Vertical Pneumatic Conveying System with Different Curvature Radius Bends [Volume 15, Issue 6, 2022, Pages 1759-1770]
-
Tumse, S.
Particle Image Velocimetry Investigation of the Flow for the Curved Type Wind Turbine Shroud [Volume 15, Issue 2, 2022, Pages 373-385]
V
-
Vasconcelos, G.
Study of the Behavior of a Vertical Axis Eolic Turbine with Articulated Blades [Volume 15, Issue 2, 2022, Pages 603-615]
-
Venkataramana, P.
Experimental Investigation of Aluminum Oxide Nanofluid on Closed Loop Pulsating Heat Pipe Performance [Volume 15, Issue 6, 2022, Pages 1947-1955]
-
Vijayakumar, P.
Experimental Investigation of Aluminum Oxide Nanofluid on Closed Loop Pulsating Heat Pipe Performance [Volume 15, Issue 6, 2022, Pages 1947-1955]
-
Vinayagamurthy, G.
Evaluation of CFD URANS Turbulence Models for the Building under Environmental Wind Flow with Experimental Validation [Volume 15, Issue 5, 2022, Pages 1387-1401]
W
-
Wahid, N. S.
Mixed Convection Magnetic Nanofluid Flow past a Rotating Vertical Porous Cone [Volume 15, Issue 4, 2022, Pages 1207-1220]
-
Wang, C.
Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method [Volume 15, Issue 1, 2022, Pages 221-230]
-
Wang, C.
Dynamics of Particle-Laden Wake Flow in a Karman Vortex Street Considering the Droplet-Vortex Interactions [Volume 15, Issue 3, 2022, Pages 857-872]
-
Wang, C.
CFD-DEM-based Numerical Simulation of Erosion Characteristic of Multistage Pressure Relief String Regulating Valve [Volume 15, Issue 4, 2022, Pages 999-1015]
-
Wang, G.
Influence of Axial Position of Self-Circulating Casing Treatment on the Performances of a Centrifugal Pump at Low Mass Flow Conditions [Volume 15, Issue 3, 2022, Pages 697-708]
-
Wang, H.
Research on the Influence of Inflow Conditions on the Aerodynamic Performance of a Tandem Cascade [Volume 15, Issue 6, 2022, Pages 1745-1758]
-
Wang, H. Q.
A Data-Based Policy Model for Intelligent Turbine Cascade Design [Volume 15, Issue 4, 2022, Pages 1179-1192]
-
Wang, J.
Comparative Numerical Study on Global Heat Transfer Process in Micro-Channel Gas Coolers with Different Structures [Volume 15, Issue 2, 2022, Pages 579-589]
-
Wang, J.
Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan [Volume 15, Issue 3, 2022, Pages 901-916]
-
Wang, J. F.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Wang, K.
Hydraulic Optimization and Experimental Measurement of Low Specific Speed Centrifugal Fire Pump [Volume 15, Issue 5, 2022, Pages 1477-1489]
-
Wang, N.
Comparative Numerical Study on Global Heat Transfer Process in Micro-Channel Gas Coolers with Different Structures [Volume 15, Issue 2, 2022, Pages 579-589]
-
Wang, P.
Investigation of Isothermal Flow inside a New Combustor with Two-Stage Axial Swirler [Volume 15, Issue 2, 2022, Pages 325-336]
-
Wang, Q.
CPFD Simulation of Gas-Solid Flow in Dense Phase Zone of Pant-Leg Fluidized Bed with Secondary Air [Volume 15, Issue 5, 2022, Pages 1319-1331]
-
Wang, S. B.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Wang, S. F.
Flow and Heat Transfer in a Co-Rotating Cavity with Tubes: A Coupled Prediction Model [Volume 15, Issue 5, 2022, Pages 1403-1416]
-
Wang, W. J.
Investigation on Jet Characteristics of Turbofan Exhaust System under Take-off Condition with High Angle of Attack [Volume 15, Issue 3, 2022, Pages 943-958]
-
Wang, Y. J.
Analysis on the Performances of Misaligned Journal Bearings using Full-Scale Test Rig and Conjugate Heat Transfer Method [Volume 15, Issue 3, 2022, Pages 747-756]
-
Wang, Z.
Research on Thrust Calibration Technology of Aeroengine Indoor Test Bench [Volume 15, Issue 1, 2022, Pages 109-116]
-
Wang, Z.
Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan [Volume 15, Issue 3, 2022, Pages 901-916]
-
Wang, Z.
Numerical Investigation on Torsional Mode Self-Excited Vibration of Guide Vane in a Reversible Pump-Turbine during Pump Mode’s Starting Up [Volume 15, Issue 6, 2022, Pages 1789-1799]
-
Wang, Z. N.
A Choking Cavitation Method and Equipment for Degrading Pollutants in Wastewater [Volume 15, Issue 1, 2022, Pages 245-253]
-
Wang, Z. X.
Unsteady Numerical Investigation on Vortex Interaction between Rim Seal Purge Flow and Upstream Stator [Volume 15, Issue 2, 2022, Pages 465-474]
-
Wang, Z. X.
Investigation on Jet Characteristics of Turbofan Exhaust System under Take-off Condition with High Angle of Attack [Volume 15, Issue 3, 2022, Pages 943-958]
-
Wang, Z. X.
Fluid-Structure Interaction Study of the Serpentine Nozzle for Turbofan [Volume 15, Issue 5, 2022, Pages 1563-1580]
-
Wang, Z. Z.
Flow Characteristics of a Dual-Intake Port Diesel Engine with Guide Vanes [Volume 15, Issue 3, 2022, Pages 709-722]
-
Wei, X.
Investigation of Isothermal Flow inside a New Combustor with Two-Stage Axial Swirler [Volume 15, Issue 2, 2022, Pages 325-336]
-
Wei, Y.
Influence of Axial Position of Self-Circulating Casing Treatment on the Performances of a Centrifugal Pump at Low Mass Flow Conditions [Volume 15, Issue 3, 2022, Pages 697-708]
-
Wei, Y.
Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan [Volume 15, Issue 3, 2022, Pages 901-916]
-
Wongwises, S.
Numerical Modeling of Interactions between Solitary Waves and Floating Breakwaters [Volume 15, Issue 6, 2022, Pages 1675-1691]
-
Wu, H.
Multi-Objective Optimization of Aerodynamic Performance for a Small Single-Stage Turbine [Volume 15, Issue 5, 2022, Pages 1451-1463]
-
Wu, M.
Liquid Film Condensation behind Shock Waves on the Cold Wall of a Diaphragmless Vertical Shock Tube: An Experimental Study [Volume 15, Issue 3, 2022, Pages 781-791]
-
Wu, S.
A General Approach for Flow Optimization and Drag Reduction in Turbulent Pipe Flows [Volume 15, Issue 3, 2022, Pages 815-829]
-
Wu, S. Y.
Effects of Inlet Types and Lengths on the Flow Field of Cyclone Separators [Volume 15, Issue 2, 2022, Pages 591-601]
-
Wu, X.
Numerical Analysis of the Effect of the Non-Sinusoidal Trajectories on the Propulsive Performance of a Bionic Hydrofoil [Volume 15, Issue 3, 2022, Pages 917-925]
-
Wu, X. F.
Numerical Study on Cubic Particle Solid–Liquid Two-Phase Flow in Multistage Pump [Volume 15, Issue 5, 2022, Pages 1377-1386]
-
Wu, Z.
Numerical Analysis of the Effect of Streamlined Nose Length on Slipstream of High-Speed Train Passing through a Tunnel [Volume 15, Issue 6, 2022, Pages 1933-1945]
-
Wu, Z. M.
Effects of Inlet Types and Lengths on the Flow Field of Cyclone Separators [Volume 15, Issue 2, 2022, Pages 591-601]
-
Wulandari, C.
A Passive Micromixer with Koch Snowflakes Fractal Obstacle in Microchannel [Volume 15, Issue 5, 2022, Pages 1333-1344]
X
-
Xia, Z.
Experimental Research of Two-phase Rotating Detonation Combustor Operating with High Total Temperature Air [Volume 15, Issue 5, 2022, Pages 1437-1449]
-
Xiang, M.
Experimental and Numerical Research on the Formation Conditions and Entrainment Characteristics of Supercavity by Rear Jet Reflux [Volume 15, Issue 1, 2022, Pages 293-309]
-
Xiao, Q.
Energy Evolution Mechanism of Air Shock Wave Propagation and Attenuation Based on VMD–HT Energy Spectrum [Volume 15, Issue 4, 2022, Pages 1049-1059]
-
Xiao, Y.
Study on Flow Characteristics of Helium Turboexpander with a Novel Intake Structure [Volume 15, Issue 3, 2022, Pages 793-802]
-
Xiao, Y. J.
Study on Flow Boiling Heat Transfer in Segmented Internally-Threaded Tube [Volume 15, Issue 5, 2022, Pages 1417-1426]
-
Xiao, Y. W.
Effects of Inlet Types and Lengths on the Flow Field of Cyclone Separators [Volume 15, Issue 2, 2022, Pages 591-601]
-
Xie, J.
Comparative Numerical Study on Global Heat Transfer Process in Micro-Channel Gas Coolers with Different Structures [Volume 15, Issue 2, 2022, Pages 579-589]
-
Xiong, X. H.
Multi-Objective Aerodynamic Optimization of a High-Speed Train Head Shape Based on an Optimal Kriging Model [Volume 15, Issue 3, 2022, Pages 803-813]
-
Xu, J.
Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan [Volume 15, Issue 3, 2022, Pages 901-916]
-
Xu, J. R.
A Comparative Study of the Buoyancy-Opposed Wall Jet using Different Turbulent Models [Volume 15, Issue 1, 2022, Pages 85-98]
-
Xu, W.
Most Suitable Blade Inclination Angle for Multiphase Flow in Soybean Milk Machine [Volume 15, Issue 2, 2022, Pages 349-361]
-
Xu, W. W.
Analysis on the Performances of Misaligned Journal Bearings using Full-Scale Test Rig and Conjugate Heat Transfer Method [Volume 15, Issue 3, 2022, Pages 747-756]
-
Xu, Y.
Numerical Study on Laminar Drag Reduction for Superhydrophobic Surfaces with Continuous V-Shaped Microstructures [Volume 15, Issue 6, 2022, Pages 1825-1836]
-
Xue, D.
3D Numerical Simulation of a Hovering Hummingbird-inspired Flapping Wing with Dynamic Morphing [Volume 15, Issue 3, 2022, Pages 873-888]
-
Xue, J.
Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces [Volume 15, Issue 3, 2022, Pages 843-855]
-
Xue, R. Y.
Hydraulic Optimization and Experimental Measurement of Low Specific Speed Centrifugal Fire Pump [Volume 15, Issue 5, 2022, Pages 1477-1489]
Y
-
Yadav, N. P.
Parametric Investigation of Closed Loop Pulsating Heat Pipe with Cerium Oxide Nanofluid [Volume 15, Issue 6, 2022, Pages 1717-1727]
-
Yadav, S. S.
Generation of Stable Linear Waves in Shallow Water in a Numerical Wave Tank [Volume 15, Issue 2, 2022, Pages 537-549]
-
Yan, F.
Particle Dynamic Characteristics of the Vertical Tubes in a Horizontal-Vertical Pneumatic Conveying System with Different Curvature Radius Bends [Volume 15, Issue 6, 2022, Pages 1759-1770]
-
Yan, H. J.
Self-similarity Characteristics of Vertical Axis Wind Turbine Wakes [Volume 15, Issue 4, 2022, Pages 1155-1164]
-
Yan, W. M.
Experimental Study on Breakup and Transition of a Rotating Liquid Jet [Volume 15, Issue 3, 2022, Pages 757-765]
-
Yan, Y.
Experimental Studies on Suppression of Combustion Instability with the Addition of Helium [Volume 15, Issue 6, 2022, Pages 1703-1715]
-
Yan, Y.
Study on Suppression of Combustion Instability using Quarter Wavelength Tube [Volume 15, Issue 6, 2022, Pages 1923-1931]
-
Yang, B.
Influence Rule of Projectile Density on the Characteristics of High-Speed Water-Entry Cavity [Volume 15, Issue 6, 2022, Pages 1901-1912]
-
Yang, D.
Comparative Numerical Study on Global Heat Transfer Process in Micro-Channel Gas Coolers with Different Structures [Volume 15, Issue 2, 2022, Pages 579-589]
-
Yang, F.
Unsteady Numerical Investigation on Vortex Interaction between Rim Seal Purge Flow and Upstream Stator [Volume 15, Issue 2, 2022, Pages 465-474]
-
Yang, F.
CPFD Simulation of Gas-Solid Flow in Dense Phase Zone of Pant-Leg Fluidized Bed with Secondary Air [Volume 15, Issue 5, 2022, Pages 1319-1331]
-
Yang, G.
Numerical Investigation on Aerodynamic Drag and Noise of Pantographs with Modified Structures [Volume 15, Issue 2, 2022, Pages 617-631]
-
Yang, H.
Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces [Volume 15, Issue 3, 2022, Pages 843-855]
-
Yang, H.
Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan [Volume 15, Issue 3, 2022, Pages 901-916]
-
Yang, J.
Effect of Volute Geometry on Radial Force Characteristics of Centrifugal Pump during Startup [Volume 15, Issue 1, 2022, Pages 25-36]
-
Yang, J.
Study on Flow Boiling Heat Transfer in Segmented Internally-Threaded Tube [Volume 15, Issue 5, 2022, Pages 1417-1426]
-
Yang, J.
Numerical Analysis of the Effect of Streamlined Nose Length on Slipstream of High-Speed Train Passing through a Tunnel [Volume 15, Issue 6, 2022, Pages 1933-1945]
-
Yang, J. G.
A Data-Based Policy Model for Intelligent Turbine Cascade Design [Volume 15, Issue 4, 2022, Pages 1179-1192]
-
Yang, K. D.
Liquid Film Condensation behind Shock Waves on the Cold Wall of a Diaphragmless Vertical Shock Tube: An Experimental Study [Volume 15, Issue 3, 2022, Pages 781-791]
-
Yang, W.
3D Numerical Simulation of a Hovering Hummingbird-inspired Flapping Wing with Dynamic Morphing [Volume 15, Issue 3, 2022, Pages 873-888]
-
Yang, W.
Experimental and Numerical Investigation of Stall Mechanism in Centrifugal Pump Impeller [Volume 15, Issue 3, 2022, Pages 927-941]
-
Yang, W. F.
Inverse Design and Optimization of Low Specific Speed Centrifugal Pump Blade Based on Adaptive POD Hybrid Model [Volume 15, Issue 2, 2022, Pages 453-464]
-
Yang, X.
Numerical Study of Combined Drag Reduction Bases on Vortex Generators and Riblets for the Ahmed Body using IDDES Methodology [Volume 15, Issue 1, 2022, Pages 193-207]
-
Yang, Y.
Multi-Objective Aerodynamic Optimization of a High-Speed Train Head Shape Based on an Optimal Kriging Model [Volume 15, Issue 3, 2022, Pages 803-813]
-
Yang, Z.
Research on the Influence of Inflow Conditions on the Aerodynamic Performance of a Tandem Cascade [Volume 15, Issue 6, 2022, Pages 1745-1758]
-
Yang, Z. Y.
Particle Dynamic Characteristics of the Vertical Tubes in a Horizontal-Vertical Pneumatic Conveying System with Different Curvature Radius Bends [Volume 15, Issue 6, 2022, Pages 1759-1770]
-
Yao, Y.
Numerical Investigation on Aerodynamic Drag and Noise of Pantographs with Modified Structures [Volume 15, Issue 2, 2022, Pages 617-631]
-
Ye, W.
Enhancing Pool Boiling Heat Transfer by Structured Surfaces– A Lattice Boltzmann Study [Volume 15, Issue 1, 2022, Pages 139-151]
-
Ye, X. M.
Effect of Contact Angle Hysteresis on Evaporation Dynamics of a Sessile Drop on a Heated Surface [Volume 15, Issue 5, 2022, Pages 1361-1376]
-
Yi, S. H.
Experimental Study on Cooling Efficiency of Hypersonic Optical Window [Volume 15, Issue 1, 2022, Pages 63-72]
-
Yigit, K. S.
Experimental and Numerical Investigation of Fluid Flow in Hydraulic Filters [Volume 15, Issue 2, 2022, Pages 363-371]
-
Yin, H.
Most Suitable Blade Inclination Angle for Multiphase Flow in Soybean Milk Machine [Volume 15, Issue 2, 2022, Pages 349-361]
-
Yin, Y.
Research on Thrust Calibration Technology of Aeroengine Indoor Test Bench [Volume 15, Issue 1, 2022, Pages 109-116]
-
Yu, P.
Numerical Analysis of the Effect of the Non-Sinusoidal Trajectories on the Propulsive Performance of a Bionic Hydrofoil [Volume 15, Issue 3, 2022, Pages 917-925]
-
Yu, X. D.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Yunas, J.
A Passive Micromixer with Koch Snowflakes Fractal Obstacle in Microchannel [Volume 15, Issue 5, 2022, Pages 1333-1344]
Z
-
Zareh, M.
Aerodynamic and Aeroacoustic Performance of a Wing with Structured Surface Inspired by Owl’s Wings [Volume 15, Issue 4, 2022, Pages 1243-1253]
-
Zeng, J. L.
Research on the Modified Mathematical Prediction Model of Impeller Cover Side Cavity Liquid Pressure for Centrifugal Pumps [Volume 15, Issue 3, 2022, Pages 673-685]
-
Zgolli, R.
Numerical Prediction Approach of Cavitation Erosion based on 3D Simulation Flow [Volume 15, Issue 4, 2022, Pages 1165-1177]
-
Zhai, L. J.
A Delayed Detached Eddy Simulation Model for the Simulation of Complex Turbulent Flow [Volume 15, Issue 4, 2022, Pages 1111-1124]
-
Zhang, B.
Experimental Study on Cooling Efficiency of Hypersonic Optical Window [Volume 15, Issue 1, 2022, Pages 63-72]
-
Zhang, B.
Drag Reduction Characteristics of Bionic Structure Composed of Grooves and Mucous Membrane Acting on Turbulent Boundary Layer [Volume 15, Issue 1, 2022, Pages 283-292]
-
Zhang, B.
Research on the Influence of Inflow Conditions on the Aerodynamic Performance of a Tandem Cascade [Volume 15, Issue 6, 2022, Pages 1745-1758]
-
Zhang, F. H.
A Choking Cavitation Method and Equipment for Degrading Pollutants in Wastewater [Volume 15, Issue 1, 2022, Pages 245-253]
-
Zhang, H.
Method of Improving Stability of a Highly-Loaded Axial Compressor Stage by Coupling Different Casing Treatments [Volume 15, Issue 3, 2022, Pages 645-657]
-
Zhang, J.
On the Scale Size of the Aerodynamic Characteristics of a High-Speed Train [Volume 15, Issue 1, 2022, Pages 209-219]
-
Zhang, J.
Drag Reduction Characteristics of Bionic Structure Composed of Grooves and Mucous Membrane Acting on Turbulent Boundary Layer [Volume 15, Issue 1, 2022, Pages 283-292]
-
Zhang, J.
Effects of Turbulence Models on Flow Characteristics of a Vertical Fire Pump [Volume 15, Issue 6, 2022, Pages 1661-1674]
-
Zhang, J. C.
Experimental Investigation on Flow Characteristics in a Turbine Rotor-Stator Cavity with Inlet at Low Radius [Volume 15, Issue 1, 2022, Pages 73-84]
-
Zhang, J. M.
Application of the Godunov-Type Corrective Smoothed Particle Method to Impulsive Load Studies [Volume 15, Issue 6, 2022, Pages 1889-1899]
-
Zhang, K.
Drag Reduction Characteristics of Bionic Structure Composed of Grooves and Mucous Membrane Acting on Turbulent Boundary Layer [Volume 15, Issue 1, 2022, Pages 283-292]
-
Zhang, K.
Very-Large-Eddy Simulation of Nonreactive Turbulent Flow for Annular Trapped Vortex Combustor [Volume 15, Issue 2, 2022, Pages 523-535]
-
Zhang, L.
Improved Multicomponent Multiphase Lattice Boltzmann Model for Physical Foaming Simulation [Volume 15, Issue 4, 2022, Pages 1125-1136]
-
Zhang, L.
CPFD Simulation of Gas-Solid Flow in Dense Phase Zone of Pant-Leg Fluidized Bed with Secondary Air [Volume 15, Issue 5, 2022, Pages 1319-1331]
-
Zhang, M.
Application of the Godunov-Type Corrective Smoothed Particle Method to Impulsive Load Studies [Volume 15, Issue 6, 2022, Pages 1889-1899]
-
Zhang, M. H.
Effects of Porous Parameters on the Aerodynamic Noise of the Blowing Device of Guardrails [Volume 15, Issue 4, 2022, Pages 1193-1206]
-
Zhang, M. Y.
Liquid Film Condensation behind Shock Waves on the Cold Wall of a Diaphragmless Vertical Shock Tube: An Experimental Study [Volume 15, Issue 3, 2022, Pages 781-791]
-
Zhang, N. K.
Effect of Contact Angle Hysteresis on Evaporation Dynamics of a Sessile Drop on a Heated Surface [Volume 15, Issue 5, 2022, Pages 1361-1376]
-
Zhang, P.
Aerodynamic Response Analysis of High-Speed Trains Passing through High Platforms under Crosswind [Volume 15, Issue 5, 2022, Pages 1525-1543]
-
Zhang, R. H.
Inverse Design and Optimization of Low Specific Speed Centrifugal Pump Blade Based on Adaptive POD Hybrid Model [Volume 15, Issue 2, 2022, Pages 453-464]
-
Zhang, R. M.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Zhang, S.
Research on Thrust Calibration Technology of Aeroengine Indoor Test Bench [Volume 15, Issue 1, 2022, Pages 109-116]
-
Zhang, S.
Analysis on the Performances of Misaligned Journal Bearings using Full-Scale Test Rig and Conjugate Heat Transfer Method [Volume 15, Issue 3, 2022, Pages 747-756]
-
Zhang, T.
Experimental Studies on Suppression of Combustion Instability with the Addition of Helium [Volume 15, Issue 6, 2022, Pages 1703-1715]
-
Zhang, W.
Experimental and Numerical Research on the Formation Conditions and Entrainment Characteristics of Supercavity by Rear Jet Reflux [Volume 15, Issue 1, 2022, Pages 293-309]
-
Zhang, W.
Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan [Volume 15, Issue 3, 2022, Pages 901-916]
-
Zhang, W.
Cavitation Characteristics during Startup Process of a Condensate Pump with Splitter Blades [Volume 15, Issue 4, 2022, Pages 1099-1109]
-
Zhang, W.
Numerical Investigation of Flow Characteristics in a Centrifugal Pump Impeller with Sinusoidal Flow Rates of Different Oscillation Amplitudes [Volume 15, Issue 6, 2022, Pages 1869-1879]
-
Zhang, X.
Influence of Blade Lean on Performance and Shock Wave/Tip Leakage Flow Interaction in a Transonic Compressor Rotor [Volume 15, Issue 1, 2022, Pages 153-167]
-
Zhang, X. B.
Self-similarity Characteristics of Vertical Axis Wind Turbine Wakes [Volume 15, Issue 4, 2022, Pages 1155-1164]
-
Zhang, X. Y.
Self-similarity Characteristics of Vertical Axis Wind Turbine Wakes [Volume 15, Issue 4, 2022, Pages 1155-1164]
-
Zhang, Y.
Enhancing Pool Boiling Heat Transfer by Structured Surfaces– A Lattice Boltzmann Study [Volume 15, Issue 1, 2022, Pages 139-151]
-
Zhang, Y.
Comparison of the Models for Multiscale Elastohydrodynamic Lubrication in a Line Contact [Volume 15, Issue 2, 2022, Pages 515-521]
-
Zhang, Y.
Multiscale Analysis of Hydrodynamic Step Bearing with Ultra Low Surface Separations [Volume 15, Issue 3, 2022, Pages 737-745]
-
Zhang, Y.
Self-Turning Process and Aerodynamic Characteristics of Slender Bodies with Different Center-of-Gravity Positions [Volume 15, Issue 4, 2022, Pages 1281-1289]
-
Zhang, Y. Q.
Effects of High-Order Nonlinearities on Freak Wave Generation in Random Sea States [Volume 15, Issue 4, 2022, Pages 1221-1229]
-
Zhang, Y. S.
Study on Flow Boiling Heat Transfer in Segmented Internally-Threaded Tube [Volume 15, Issue 5, 2022, Pages 1417-1426]
-
Zhang, Y. Z.
A Comparative Study of the Buoyancy-Opposed Wall Jet using Different Turbulent Models [Volume 15, Issue 1, 2022, Pages 85-98]
-
Zhang, Z.
Study on Flow Characteristics of Helium Turboexpander with a Novel Intake Structure [Volume 15, Issue 3, 2022, Pages 793-802]
-
Zhao, B.
Drag Reduction Characteristics of Bionic Structure Composed of Grooves and Mucous Membrane Acting on Turbulent Boundary Layer [Volume 15, Issue 1, 2022, Pages 283-292]
-
Zhao, H. L.
Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method [Volume 15, Issue 1, 2022, Pages 221-230]
-
Zhao, X.
Experimental and Numerical Research on the Formation Conditions and Entrainment Characteristics of Supercavity by Rear Jet Reflux [Volume 15, Issue 1, 2022, Pages 293-309]
-
Zhao, X. H.
Experimental Study on Cooling Efficiency of Hypersonic Optical Window [Volume 15, Issue 1, 2022, Pages 63-72]
-
Zhao, Y. L.
Experimental Study of the Unstart/Restart Process of a Two-Dimensional Supersonic Inlet Induced by Backpressure [Volume 15, Issue 2, 2022, Pages 415-426]
-
Zhao, Y. X.
Experimental Study of the Unstart/Restart Process of a Two-Dimensional Supersonic Inlet Induced by Backpressure [Volume 15, Issue 2, 2022, Pages 415-426]
-
Zheng, S.
Investigations on the Interfering Factor of Single Synthetic Jet Actuator on Improving the Efficiency of Wing Control Surface [Volume 15, Issue 6, 2022, Pages 1801-1813]
-
Zhong, H.
Study on Suppression of Combustion Instability using Quarter Wavelength Tube [Volume 15, Issue 6, 2022, Pages 1923-1931]
-
Zhou, C.
Experimental Research of Two-phase Rotating Detonation Combustor Operating with High Total Temperature Air [Volume 15, Issue 5, 2022, Pages 1437-1449]
-
Zhou, D.
Numerical Analysis of the Effect of Streamlined Nose Length on Slipstream of High-Speed Train Passing through a Tunnel [Volume 15, Issue 6, 2022, Pages 1933-1945]
-
Zhou, D. F.
Acquisition Method for Micro-gap Oil Film Morphology of Hydrostatic Workbench Having Double Rectangular Cavities under Working Conditions of High-Speed and Heavy-Load [Volume 15, Issue 2, 2022, Pages 505-514]
-
Zhou, J. F.
Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method [Volume 15, Issue 1, 2022, Pages 221-230]
-
Zhou, L.
Unsteady Numerical Investigation on Vortex Interaction between Rim Seal Purge Flow and Upstream Stator [Volume 15, Issue 2, 2022, Pages 465-474]
-
Zhou, L.
Investigation on Jet Characteristics of Turbofan Exhaust System under Take-off Condition with High Angle of Attack [Volume 15, Issue 3, 2022, Pages 943-958]
-
Zhou, L.
Fluid-Structure Interaction Study of the Serpentine Nozzle for Turbofan [Volume 15, Issue 5, 2022, Pages 1563-1580]
-
Zhou, L.
Numerical Investigation on Torsional Mode Self-Excited Vibration of Guide Vane in a Reversible Pump-Turbine during Pump Mode’s Starting Up [Volume 15, Issue 6, 2022, Pages 1789-1799]
-
Zhou, R.
Effect of Volute Geometry on Radial Force Characteristics of Centrifugal Pump during Startup [Volume 15, Issue 1, 2022, Pages 25-36]
-
Zhou, S.
Research on Thrust Calibration Technology of Aeroengine Indoor Test Bench [Volume 15, Issue 1, 2022, Pages 109-116]
-
Zhou, X.
A DDES Model with Subgrid-scale Eddy Viscosity for Turbulent Flow [Volume 15, Issue 3, 2022, Pages 831-842]
-
Zhou, Y.
Investigations on the Interfering Factor of Single Synthetic Jet Actuator on Improving the Efficiency of Wing Control Surface [Volume 15, Issue 6, 2022, Pages 1801-1813]
-
Zhou, Y. Y.
Experimental Study of the Unstart/Restart Process of a Two-Dimensional Supersonic Inlet Induced by Backpressure [Volume 15, Issue 2, 2022, Pages 415-426]
-
Zhu, D. S.
Gas-Solid Erosion Study of Elbow Pipe based on Erosion Dynamic Grid Technology [Volume 15, Issue 6, 2022, Pages 1837-1850]
-
Zhu, H. D.
Liquid Film Condensation behind Shock Waves on the Cold Wall of a Diaphragmless Vertical Shock Tube: An Experimental Study [Volume 15, Issue 3, 2022, Pages 781-791]
-
Zhu, R.
Particle Dynamic Characteristics of the Vertical Tubes in a Horizontal-Vertical Pneumatic Conveying System with Different Curvature Radius Bends [Volume 15, Issue 6, 2022, Pages 1759-1770]
-
Zhu, Z.
Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces [Volume 15, Issue 3, 2022, Pages 843-855]
-
Zhu, Z.
Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan [Volume 15, Issue 3, 2022, Pages 901-916]
-
Zhu, Z. H.
A Comparative Study of the Buoyancy-Opposed Wall Jet using Different Turbulent Models [Volume 15, Issue 1, 2022, Pages 85-98]
-
Zhuo, C.
Numerical Study on the Effect of Jet on the Operation of Powder Fuel Scramjet [Volume 15, Issue 1, 2022, Pages 117-127]
-
Zu, X.
Energy Evolution Mechanism of Air Shock Wave Propagation and Attenuation Based on VMD–HT Energy Spectrum [Volume 15, Issue 4, 2022, Pages 1049-1059]
Your query does not match with any item