Research on the Non-uniform Flow Characteristics in a Screw Mixed-flow Deep-sea Mining Pump

Document Type : Regular Article

Authors

1 School of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou, Gansu, China

2 Key Laboratory of Fluid Machinery and Systems of Gansu Province, Lanzhou Gansu, China

10.47176/jafm.18.7.3188

Abstract

Deep-sea slurry pump is a crucial component for achieving vertical transportation of ore particles in pump-pipe lifting deep-sea mining systems. However, traditional mining pump structures face challenges, such as insufficient particle flow capacity and blockage susceptibility, which affect the slurry pump's operational stability. This study introduces a novel deep-sea slurry pump design that incorporates the non-clogging structural characteristics of a screw mixed flow impeller combined with a diffuser. The pump flow capacity was evaluated using the CFD-DEM (Computational Fluid Dynamics - Discrete Element Method) coupling method for transporting 10 mm spherical particles at various flow rates. The motion patterns and non-uniform distribution characteristics of particles were analyzed qualitatively and quantitatively within the pump under different inflow conditions. The proposed pump demonstrated a robust coarse particle overflow capacity for varying particle transport states and unequal particle distribution among flow components. The particle quantity changed consistently throughout the transportation process and was divided into a growth phase and a stable phase. The main flow components exhibited a dynamic non-uniform particle flow with a more pronounced periodic nature in the impeller channel. The degree of non-uniform particle flow in the diffuser channel was inversely related to the flow rate, and was higher compared to the impeller channel.

Keywords

Main Subjects


Cheng, Z., Liu, H., Wang, K., Tan, M., Sun, X., & Shen, D. (2023). Experimental study on unbalanced response characteristics of the impeller of mixed transport pump in deep-sea mining. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(6), 1279-1290. https://doi.org/10.1177/09544062221127125
Cundall, P. A., & Hart, R. D. (1985). Development of generalized 2-D and 3-D distinct element programs for modeling jointed rock. Itasca Consulting Group.
Dehghan, A. A., & Shojaeefard, M. H. (2022). Experimental and numerical optimization of a centrifugal pump volute and its effect on head and hydraulic efficiency at the best efficiency point. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(9), 4577-4598. https://doi.org /10.1177/09544062211056019
Dehghan, A. A., Shojaeefard, M. H., & Roshanaei, M. (2024). Exploring a new criterion to determine the onset of cavitation in centrifugal pumps from energy-saving standpoint; experimental and numerical investigation. Energy, 293, 130681. https://doi.org/10.1016/j.energy.2024.130681
Deng, L., Hu, Q., Chen, J., Kang, Y., & Liu, S. (2021). Particle distribution and motion in six-stage centrifugal pump by means of slurry experiment and CFD-DEM simulation. Journal of Marine Science and Engineering, 9(7), 716. https://doi.org/10.3390/jmse9070716
Deng, Y., Li, R., Han, W., Yang, W., Li, Z., & Zhang, Y. (2015). Characteristics of backflow vortex cavitation in screw centrifugal pump. Transactions of the Chinese Society of Agricultural Engineering, 31(1), 86-90. https://doi.org/10.3969/j.issn.1002-6819.2015.01.013
Ding, K., Li, J., Li, C., & Jia, C. (2021). Design and calculation analysis of a slurry transporting pump for deep sea mining. Ship Engineering, 43(1), 144-149. https://doi.org/10.13788/j.cnki.cbgc.2021.01.25.
Guan, Y., Zou, L., Zheng, H., Bian, Y., & Yu, Z. (2021). Ore particle backflow performance in the deep-sea mining slurry pump. Journal of Harbin Engineering University, 42(11), 1557-1565. https://dx.doi.org/10.11990/jheu.202008008
Hu, Q., Chen, J., Deng, L., & Liu, S. (2021). CFD-DEM coupled simulation and experimental study of deep-sea lifting mine pump under extreme working conditions. The Chinese Journal of Nonferrous Metals, 31, 2926-2937. https://doi.org/10.11817/j.ysxb.1004.0609.2021-42074
Ji, C., Guan, Y., Zheng, H., & Zhang, H. (2021). Effect of particle size on performance of slurry pump in deep sea mining. Mining and Metallurgical Engineering, 41(01),1-6. https://doi.org/10.3969/j.issn.0253-6099.2021.01.001
Kang, Y., Liu, S., Zou, W., Zhao, H., & Hu, X. (2019). Design and analysis of an innovative deep-sea lifting motor pump. Applied Ocean Research, 82, 22-31. https://doi.org/10.1016/j.apor.2018.10.018
Kuntz, G. (1979, April). The technical advantages of submersible motor pumps in deep sea technology and the delivery of manganese nodules. Off shore Technology Conference (pp. OTC-3367). OTC. https://doi.org/10.4043/3367-MS
Li, R., Ma, D., Shen, Z., Jiang, F., Liu, L., & Han, W. (2024, October). Study on the inlet backflow characteristics and particle deposition of screw mixed-flow deep-sea mining pump under small flow conditions. Journal of Physics: Conference Series (Vol. 2854, No. 1, p. 012032). IOP Publishing. https://doi.org/10.1088/1742-6596/2854/1/012032
Shen, Z., & Chu, W. (2018, November). Effect of particle parameters on erosion wear and performance of screw centrifugal pump. ASME International Mechanical Engineering Congress and Exposition (Vol. 52101, p. V007T09A018). American Society of Mechanical Engineers. https://doi.org/10.1115/IMECE2018-88586
Shen, Z., Chu, W., & Dong, W. (2018). Effect of particle parameters on flow field and erosion wear characteristics of flow passage components in screw centrifugal pump. Transactions of the Chinese Society of Agricultural Engineering34(6), 58-66. https://doi.org/10.11975/j.issn.1002-6819.2018.06.007
Su, X., Tang, Z., Li, Y., Zhu, Z., Mianowicz, K., & Balaz, P. (2020). Research of particle motion in a two-stage slurry transport pump for deep-ocean mining by the CFD-DEM method. Energies, 13(24), 6711. https://doi.org/10.3390/en13246711
Tram, T. (1991). R&D of Manganese Nodule Mining Systems.
Wang, G., Huang, Z., Zhou, S., Fu, Q., Zhong, L., Guo, Q., Zhu, D., Liang, D., & Huang C. (2023). Current status and development direction of deep-sea mineral resource exploitation equipment. Strategic Study of CAE 2023, 25(06), 1-12. http://doi.org/10.15302/J-SSCAE-2023.03.001
Wang, J., Liu, M., Lei, M., Wu, Q., Wang, K., & Deng, H. (2024). Gas and powder flow characteristics of packed bed: A two-way coupled CFD-DEM study. International Journal of Multiphase Flow, 178, 104904. https://doi.org/10.1016/j.ijmultiphaseflow.2024.104904
Wang, R., Guan, Y., Jin, X., Tang, Z., Zhu, Z., & Su, X. (2021). Impact of particle sizes on flow characteristics of slurry pump for deep‐sea mining. Shock and Vibration, 2021(1), 6684944. https://doi.org/10.1155/2021/6684944
Weaver, D. S., & Mišković, S. (2024). CFD-DEM validation and simulation of gas–liquid–solid three phase high-speed jet flow. Chemical Engineering Research and Design201, 561-578. https://doi.org/10.1016/j.cherd.2023.11.046
Yakhot, V., & Orszag, S. A. (1986). Renormalization group analysis of turbulence. I. Basic theory. Journal of Scientific Computing1(1), 3-51. https://doi.org/10.1007/bf01061452
Yang, F. X., Chen, Q., & Zeng, Y. C. (2014). Research on design method of deep-sea mining slurry pump. Journal of Hefei University of Technology (Natural Science), 14(12), 1413-1418. https://doi.org/10.3969/j.issn.1003-5060.2014.12.002
Yang, F., Zhou, Z., Xu, H., & Chen, Q. (2017). Analysis of the influence of rotational speed on solid-liquid two-phase flow of slurry pump for deep-sea mining. Journal of Hefei University of Technology, 40(5), 589-594. https://doi.org/10.3969/j.issn.1003-5060.2017.05.003
Yang, H., & Liu, S. (2020). A new lifting pump for deep-sea mining. Journal of Marine Engineering & Technology, 19(2), 102-108. https://doi.org/10.1080/20464177.2019.1709276
Yang, J., Liu, L., Lyu, H., & Lin, Z. (2020). Deep-sea mining equipment in China: current status and prospect. Strategic Study of Chinese Academy of Engineering, 22(6), 1-9. https://doi.org/10.15302/J-SSCAE-2020.06.001
Zhou, M., Wang, S., Kuang, S., Luo, K., Fan, J., & Yu, A. (2019). CFD-DEM modelling of hydraulic conveying of solid particles in a vertical pipe. Powder Technology, 354, 893-905. https://doi.org/10.1016/j.powtec.2019.07.015
Zhu, W., Ma, X. K., Xie, B. Q., & Ma, W. B. (2024). Analysis of the thermo-hydro-mechanical coupled dynamic response of sediments under eccentric driving of deep-sea mining vehicle. Computers and Geotechnics, 171, 106389. https://doi.org/10.1016/j.compgeo.2024.106389
Zou, W., Li, H. & Kang, Y. (2021). Research on slurry pump hydraulic lift system for marine mineral resources exploitation. The Chinese Journal of Nonferrous Metals 31(10), 2953-2962. https://doi.org/10.11817/j.ysxb.1004.0609.2021-37997
Zou, W., Liu, R., & Liu, S. (2019). Study on lifting motor pumps for coarse particle slurry in sea bed mining. China Mechanical Engineering, 30(24), 2939. https://doi.org/10.3969/j.issn.1004-132X.2019.24.006
Zou, L., Sun J., Sun, Z., Wang, J., & Yu, Z. (2023). Deep-sea mining core technology in Chian current situation and prospects. Journal of Harbin Engineering University, 44(05), 708-716. http://dx.doi.org/10.11990/jheu.202204011
Zou, Z., Zhu, J., Jia, J., Du, Z., Wang, Q., Zhu, Q., & Li, H. (2020). CFD Simulation of a fluid–solid non-catalytic reaction based on a structure-based mass transfer model: shrinking spherical reaction. Industrial & Engineering Chemistry Research, 59(45), 19989-19998. https://doi.org/10.1021/acs.iecr.0c04409