Study on Staged Start-up Mitigation Strategies for Water Hammer in Large-scale Centrifugal Pump Systems Based on One-dimensional and Three-dimensional Coupled Simulation

Document Type : Regular Article

Authors

School of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou, 730050, China

10.47176/jafm.18.7.3179

Abstract

In large-scale centrifugal pump systems, the conventional linear start-up method often induces significant instantaneous pressure peaks (commonly referred to as water hammer) at the pump outlet when the valve is initially opened. These pressure surges not only exceed the system's designed operational pressure but also exert substantial mechanical stress on critical components, such as the impeller, potentially disrupting the system's stability and reliability. This study investigated whether a staged start-up method can effectively minimize the instantaneous pressure peaks generated at the pump outlet upon the completion of the start-up process. The transient external characteristics and internal flow field variations of a medium-to-high specific speed centrifugal pump system during staged start-up were investigated by integrating one-dimensional external characteristics analysis and three-dimensional internal flow field simulation. The study revealed that under the conventional linear start-up method, where the pump speed is increased to the rated speed before opening the valve, the pump–valve coordinated start-up mode generates an instantaneous pressure peak at the pump outlet, exceeding the designed head by 39%. In the staged start-up method, where the valve is opened in advance when the pump speed reaches 0.7 times the rated speed, the pressure peak is reduced by 23.94% compared with that in the linear start-up method, Additionally, the pressure fluctuation within the internal flow field is significantly mitigated, effectively ensuring the safe start-up and operation of the large-scale centrifugal pump.

Keywords

Main Subjects


Desheng, S. Z., Qiang, Z., & Qi, G. (2022). Experimental and numerical investigation on the transient cavitating flows in a mixed flow pump with different number of blades at start up. Journal of Fluids Engineering, 144(5), 051204. https://doi.org/10.1115/1.4052863
Ding, H., Ge, F., & Wang, K. (2023). Influence of blade trailing-edge filing on the transient characteristics of the centrifugal pump during start up. Processes, 11(8), 2420. https://doi.org/10.3390/pr11082420
Feng, J. J., Zhang, Y., & Zhu, G. J. (2020). Transition process characteristics of centrifugal pump with power-off based on entropy production theory. Transactions of the Chinese Society of Agricultural Engineering, 36(4), 10-17. https://doi.org/10.11975/j.issn.10026819.2020.04.002
Fu, X., Li, D., Wang, H., Li, Z., Zhao, Q., & Wei, X. (2021). One- and three-dimensional coupling flow simulations of pumped-storage power stations with complex long-distance water conveyance pipeline system. Journal of Cleaner Production, 315, 128228. https://doi.org/10.1016/j.jclepro.2021.128228
Gu, M. X. (2021). Review of the full characteristic curves of pumps in long-distance water transport systems. Innovation Science and Technology, (17), 30-31. https://doi.org/10.1016/j.enconman.2018.07.091
Kan, K., Zheng, Y., Chen, H. X., Zhou, D. Q., Dai, J., Binama, M., & Yu, A. (2020). Numerical simulation of transient flow in a shaft extension tubular pump unit during runaway process caused by power failure. Renewable Energy, 154, 1153-1164. https://doi.org/10.1016/j.renene.2020.03.057
Li, Q., Ma, X., & Wu, P. (2020). Study on the transient characteristics of the centrifugal pump during the start up period with assisted valve. Processes, 8(10), 1241. https://doi.org/10.3390/pr8101241
Li, Q., Zhang, R., & Kang, C. (2022). Transient characteristics during start-up of dual pumps in the prefabricated pumping station. AQUA—Water Infrastructure, Ecosystems and Society, 71(10), 1229-1240. https://doi.org/10.2166/aqua.2022.234
Li, W., Lu, D. L., & Ma, L. (2021a). Experimental study on pressure vibration characteristics of mixed-flow pump during start-up. Trans. Chin. Soc. Agric. Eng, 37, 44-50. https://doi.org/10.11975/j.issn.1002-6819.2021.01.006
Li, W., Ma, L., & Shi, W. (2021b). Numerical simulation of inlet flow characteristics of mixed flow pumps during start-up. China Mechanical Engineering, 32(06): 666. https://doi.org/10.3969/j.issn.1004-132X.2021.06.005
Lin, T., Li, X., Zhu, Z. (2021). Application of enstrophy dissipation to analyze energy loss in a centrifugal pump as turbine. Renewable Energy, 163, 41-55. https://doi.org/10.1016/j.renene.2020.08.109
Liu, B. X., Lu, J. L., Feng, J. J. (2024a). Influence of valve plate wake on the performance of centrifugal pump. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 40(2), 217-227. https://doi.org/10.11975/j.issn.1002-6819.202308053
Liu, S., Ma, A., & Zhao, X. (2024b). Characteristic analysis of pressure fluctuation of the super large flow and high-power centrifugal pump during transient processes of the start-up and shutdown. Journal of Physics: Conference Series, 2752(1), 012133. https://doi.org/10.1088/1742-6596/2752/1/012133
Lu, Y. P., Ma, C., Tan, L., & Han, Y. (2022). Theoretical model of transient mixed-flow pump start-up. Journal of Tsinghua University (Science and Technology), 62(12), 1938-1944. https://doi.org/10.16511/j.cnki.qhdxxb.2022.26.007
Shi, L., Zhang, J., & Yu, X. D. (2023). Study on reducing height of surge tank in long-distance and multi-branch water conveyance system. Journal of Huazhong University of Science and Technology (Natural Science Edition), 51(08), 67-73. https://doi.org/10.13245/j.hust.230812
Tanaka, T., Toyomoto, T., & Nasu, K. (2021). Transient characteristics of a centrifugal pump at rapid start up. Journal of Physics. Conference Series, 1909(1), 012032. https://doi.org/10.1088/1755-1315/240/5/052016
Tang, Z., Zhu, G., & Feng, J. (2023). Influence of pump start-up mode on the stability of mixed-flow pumps.  Journal of Mechanical Science and Technology, 37(6), 2949-2958. https://doi.org/10.1007/s12206-023-0521-7
Wang, L., Li, M., & Wang, F. J. (2017). Study on three-dimensional internal characteristics method of Suter curves for double-suction centrifugal pump. Journal of Hydraulic Engineering, 48, 113-122.  https://doi.org/10.13243/j.cnki.slxb.20160667
Wang, X. H., Jiang, H. Z., Miao, S. C., Bai, X. B., & Qi, B. (2024). Analysis of Energy Dissipation Mechanism of Multistage Hydraulic Turbine Based on Entropy Production Theory. Transactions of the Chinese Society for Agricultural Machinery, 55(3),162-172. https://doi:10.6041/i.issn.1000-298.2024.03.016
Xia, Y., Mao, J., & Li, G. (2024). Analysis of internal flow characteristics of a multistage pump during start-up. Journal of Physics: Conference Series, 2707(1), 012025. https://doi.org/10.1088/1742-6596/2707/1/012025
Xu, H., Gong, Y., Cao, C. J., Chen, H. X., & Feng, J. G. (2021). 3D start-up transition process of full flow system for shaft-extension tubular pump station. Transactions of the Chinese Society for Agricultural Machinery, 52(4), 143-151. https://doi.org/10.6041/j.issn.1000-1298.2021.04.015
Yun, L., Bin, L., & Jie, F. (2020). Research on the transient hydraulic characteristics of multistage centrifugal pump during start-up process. Frontiers in Energy Research, 8, 76. https://doi.org/10.3389/fenrg.2020.00076
Zhang, F. Y., Lu, H., Chen, T. R., Wu, Q., Huang, B., Wang, G. Y. (2021). Transient characteristics of start-up process of an axial flow water-jet propeller. Acta Armamentarii, 42(8), 1592-1603. https://doi.org/10.3969/j.issn.1000-1093.2021.08.003
Zhang, H., Sun, J., & Dong, W. (2024). Numerical analysis of the transient characteristics of internal flow in the acceleration process of variable speed regulation of a centrifugal pump. Journal of Physics, 2752(1), 012097. https://doi.org/10.1088/1742-6596/2752/1/012097
Zhang, Y. L., Zhang, K. Y., & Li, J. F. (2022). Effect of rotational speed and flowrate on the start up characteristics of a pumps as turbine. Measurement and Control, 55(9-10): 1043-1056. https://doi.org/10.1177/00202940221098052