Assessment of Erosion Wear on a Reducing Pipe in a Propulsion System Using the Eulerian-Lagrangian Method

Document Type : Regular Article

Authors

1 School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing, Jiangsu Province, 210094, China

2 Weichai Power Co., Ltd., Weifang, Shandong Province, 261061, China

10.47176/jafm.18.9.3408

Abstract

The erosion wear on a forcing cone (FC), which is a reducing pipe structure in a barrel, is a transient complicated process that is caused by a high-speed dense propellant particle group. This process leads to the reduced propulsive performance and shortened useful life of a propulsion system. The accurate evaluation of this phenomenon is a formidable task. In this study, an effective evaluation model is developed to tackle this challenge, where the initial interior ballistic model is integrated into a computational fluid dynamics and discrete element method (CFD-DEM) coupling framework to reproduce the propellant gas source. The detailed particle interactions are factored into the model to enhance the precision. The results show that a gushing phenomenon exists when the particles move in the FC. The main interaction between the particles and the wall gradually changes from an impact interaction to a friction interaction. The erosion loss mass increases exponentially over time. Finally, the erosion distribution varies from an annular irregular distribution to a cloud-like distribution from the left side of the FC to the right side. The maximum erosion depth and the mass loss rate are positive with the FC’s taper angle. When the taper is 1/5, the mass loss can reach up to 60 mg and the maximum erosion depth can reach 1.1 μm.

Keywords

Main Subjects


Bai, X., Yao, Y., Han, Z., Zhang, J., & Zhang, S. (2020). Study of solid particle erosion on helicopter rotor blades surfaces. Applied Sciences, 10, 977. https://doi.org/10.3390/app10030977
Borges, M. F., Antunes, F. V., Prates, P. A., & Branco, R. (2020) A numerical study of the effect of isotropic hardening parameters on mode I fatigue crack growth. Metals, 10(2), 177. https://doi.org/10.3390/met10020177
Chen, A. & Yu, Y. (2024). Three-dimensional particle-scale investigation of transient gas–solid flow characteristics in the propulsion system with a complex charge structure. Physics of Fluids, 36, 085122. https://doi.org/10.1063/5.0216737
Chen, M. & Tan, L. (2024). Role of particle motion on pressure fluctuation and erosion for a centrifugal pump in energy storage pump station. Journal of Energy Storage, 99, 113252. https://doi.org/10.1016/j.est.2024.113252
Chevalier, O., Langlet, A., Fouche-Sanseigne, L., & Guilmard Y. (2015). Assessment of the lifetime of gun barrels under high-speed moving loads. Journal of Pressure Vessel Technology - Transactions of the ASME, 137, 015001. https://doi.org/10.1115/1.4027306
Chung, D., Shin, N., Oh, M., Yoo, S., & Nam, S. (2007). Prediction of erosion from heat transfer measurements of 40 mm gun tubes. Wear, 263, 246-250. https://doi.org/10.1016/j.wear.2006.12.065
Dhiman, P., Bhat, A., & Karn, A. (2025). Multiphase flow simulations to explore novel technique of air injection to mitigate silt erosion in hydro turbines. Journal of Applied Fluid Mechanics, 18(2), 468-484. https://doi.org/10.47176/jafm.18.2.2735
Dou, C., Su, B., Wang, C., Jin, P., Chen, J., Huang, J., & Zhang, C. (2022). A comparative study on gunpowder erosion and promoted ignition combustion of 30SiMn2MoV gun barrel. Engineering Failure Analysis, 142, 106741.  https://doi.org/10.1016/j.engfailanal.2022.106741
Ewing, M. E., Laker, T. S., & Walker, D. T. (2013). Numerical modeling of ablation heat transfer. Journal of Thermophysics and Heat Transfer, 27(4), 615-632. https://doi.org/10.2514/1.T4164
Fu, X., Li, E., & Gao, W. (2009, August 18 - September 20). Texture feature analysis on erosion and wear in artillery chamber. 5th International Conference on Information Assurance and Security, Xi'an, Shanxi Province, China. https://doi.org/10.1109/IAS.2009.164
Guo, X., Zang, F., Zhu, Y., & Cao, D. (2025). Aircraft propeller erosion wear and aerodynamic characteristics. Acta Mechanica Sinica, 41, 524251. https://doi.org/10.1007/s10409-024-24251-x
Hong, B., Li, Y., Li, Y., Gong, J., Yu, Y., Huang, A., & Li, X. (2023). Numerical simulation of solid particle erosion in the gas-liquid flow of key pipe fittings in shale gas fields. Case Studies in Thermal Engineering, 42, 102742. https://doi.org/10.1016/j.csite.2023.102742
Hou, Q., Zhou, Z., & Yu, A. (2011). Computational study of heat transfer in a bubbling fluidized bed with a horizontal tube. AICHE Journal, 58(5), 1422-1434. https://doi.org/10.1002/aic.12700
Huser, A. & Kvernvold, O. (1998). Prediction of sand erosion in process and pipe components. 1st North American Conference on Multiphase Technology. Banff, Canada, 217-228.
Lee, H., Yang, Y., Chang, W., & Wu, T. (2009). Estimation of heat flux and thermal stresses in multilayer gun barrel with thermal contact resistance. Applied Mathematics and Computation, 209, 211-221. https://doi.org/10.1016/j.amc.2008.12.038
Li, S., Wang, L., & Yang, G. (2023a). Surface damage evolution of artillery barrel under high-temperature erosion and high-speed impact. Case Studies in Thermal Engineering, 42, 102762. https://doi.org/10.1016/j.csite.2023.102762
Li, X., Mu, L., Zang, Y., & Qin, Q. (2020). Study on performance degradation and failure analysis of machine gun barrel. Defence Technology, 16, 362-373. https://doi.org/10.1016/j.dt.2019.05.008
Li, X., Zang, Y., Mu, L., Lian, Y., & Qin, Q. (2020). Erosion analysis of machine gun barrel and lifespan prediction under typical shooting conditions. Wear, 444-445, 203177. https://doi.org/10.1016/j.wear.2019.203177
Li, Y., Fu, J., Qian, L., Zhu, M., Cao, J., & Liu, N. (2024). Research on the erosion of gun barrel based on vented vessel tests. Tribology Transactions, 67(2), 270-279. https://doi.org/10.1080/10402004.2024.2306297
Lin, Z, Sun, X, Yu, T, Zhang, Y, Li, Y, & Zhu, Z. (2020). Gas-solid two-phase flow and erosion calculation of gate valve based on the CFD-DEM mode. Powder Technology, 366, 395-407. https://doi.org/10.1016/j.powtec.2020.02.050
Oka, Y. I., & Yoshida, T. (2005). Practical estimation of erosion damage caused by solid particle impact part 2: Mechanical properties of materials directly associated with erosion damage. Wear, 259(1), 102-109. https://doi.org/10.1016/j.wear.2005.01.040.
Oka, Y. I., Okamura, K., & Yoshida, T. (2005). Practical estimation of erosion damage caused by solid particle impact part 1: Effects of impact parameters on a predictive equation. Wear, 259(1), 95-101. https://doi.org/10.1016/j.wear.2005.01.039.
Papadikis, K., Gu, S., Fivga, A., & Bridgwater, A. B. (2010). Numerical comparison of the drag models of granular flows applied to the fast pyrolysis biomass. Energy Fuels, 24, 2133-2145. https://doi.org/10.1021/ef901497b
Peng, W. & Cao, X. (2016). Numerical prediction of erosion distributions and solid particle trajectories in elbows for gas-solid flow. Journal of Natural Gas Science and Engineering, 30, 455-470. https://doi.org/10.1016/j.jngse.2016.02.008
Perera, Q., K.ward, H., Guzzomi, F., & Vafadar, A. (2024). Erosion wear characterization of an open Ductile Iron butterfly valve subjected to Aluminium Oxide particle slurry flow. Tribology International, 191, 109199. https://doi.org/10.1016/j.triboint.2023.109199
Rezgui, N., Mickovic, D. M., Zivkovic, S. Z., & Ivanovic, I. B. (2019). Experimental and numerical analysis of thermo-chemical erosion in gun steel. Thermal Science, 23(2A), 599-612. https://doi.org/10.2298/TSCI180608194R
Shih, T. H., Liou, W. W., Shabbir, A., Yang, Z., & Zhu, J. (1995). A new k-ϵ eddy viscosity model for high reynolds number turbulent flows. Computers & Fluids, 24(3), 227-238. https://doi.org/10.1016/0045-7930(94)00032-T
Singh, V., Kumar, S., & Mohapatra, S. K. (2019). Modeling of erosion wear of sand water slurry flow through bipe Bend using CFD. Journal of Applied Fluid Mechanics, 12(3), 679-687. https://doi.org/10.29252/jafm.12.03.29199
Tao, C., Zhang, Y., Li, S., Jia, C., Li, Y., Zhang, X., & He, Z. (2010). Mechanism of interior ballistic peak phenomenon of guns and its effects. Journal of Applied Mechanics-Transactions of the ASME, 77(5), 051405. https://doi.org/10.1115/1.4001561
Underwood, J. H., Witherell, M. D., Sopok, S., McNeil, J. C., Mulligan, C. P., & Vigilante, G. N. (2004). Thermomechanical modeling of transient thermal damage in cannon bore materials. Wear, 257, 992-998. https://doi.org/10.1016/j.wear.2004.07.008
Wang, C., Liu, M., & Yan, J. (2023). Flow irreversibility versus wear of elbow-reducer connection with gas-solid two-phase flow: A numerical study via CFD-DEM coupling method. Powder Technology, 428, 118835. https://doi.org/10.1016/j.powtec.2023.118835
Wang, L., Li, S., Xu, F., & Yang, G. (2022). United computational model for predicting thermochemical-mechanical erosion in artillery barrel considering friction behavior. Case Studies in Thermal Engineering, 29, 101726. https://doi.org/10.1016/j.csite.2021.101726
Wang, M., Dong, H., Wang, Q., Li, J., & Zhao, L. (2003). Microstructures and mechanical properties of high strength gun steels. Ordnance Material Science and Engineering, 26(002), 7-10. https://doi.org/10.14024/j.cnki.1004-244x.2003.02.002.
Wang, S., Shi, J., Han, X., Zhu, L., Bi, J., Wang, J., Wang, S., Ma, Z., & Wang, Z. (2022). Effect of pipe orientation on erosion of π-shaped pipelines. Powder Technology, 08, 117769. https://doi.org/10.1016/j.powtec.2022.117769
Wang, Y., Pu, C., Luan, Y., Fu, E., Du, J., & Xiao, Z. (2024) Preparation and performance studies on organic-inorganic phase change composites based on zeolitic imidazolate and paraffin for reducing gun barrel erosion. Journal of Energy Storage 100, 113457. https://doi.org/10.1016/j.est.2024.113457
Xie, R., Cao, X., Zhang, J., Sun, X., Fu, C., & Wu, C. (2020). Study of erosion behavior in elbows mounted in series using computational fluid dynamics method. Journal of Energy Resources Technology-Transactions of the ASME, 142(11), 113001. https://doi.org/10.1115/1.4047252
Yang, M., & Yu, Y. (2024). Study on interior ballistic characteristics of worn gun considering projectile engraving process. Journal of Mechanical Science and Technology 38(12), 6529~6538. https://doi.org/10.1007/s12206-024-1109-6
Yang, S., Luo, K., Fan, J., & Cen, K. (2014). Particle-scale investigation of the solid dispersion and residence properties in a 3-D spout-fluid bed. AICHE Journal, 60(8), 2788-2804. https://doi.org/10.1002/aic.14494
Yang, Y., Zhang, X., Xu, C., & Fan, L. X. (2020). Dynamic stress analysis of anisotropic gun barrel under coupled thermo-mechanical loads via finite element method. Latin American Journal of Solid and Structures, 17(1), e243. https://doi.org/10.1590/1679-78255800
Zhang, J., Zhang, H., Liu, Y., & Zhang, C. (2021). Erosion wear characteristics of tee tubes with gas-solid two-phase flow. Journal of Pressure Vessel Technology - Transactions of the ASME, 143, 064502. https://doi.org/10.1115/1.4051068
Zolfagharnasab, M. H., Salimi, M., Zolfagharnasab, H., Alimoradi, H., Shams, M., & Aghanajafi, C. (2021). A novel numerical investigation of erosion wear over various 90-degree elbow duct sections. Powder Technology, 380, 1-17. https://doi.org/10.1016/j.powtec.2020.11.059
Zou, L., Yu, C., Feng, G., Zhong, J., & Lv, Y. (2020). Establishment of erosion model of gun steel material and study on its erosion performance. Journal of Mechanical Science Technology, 34(5), 2019-2026. http://doi.org/10.1007s12206-020-0423-x