High-efficiency Axial Flow Fan Design by Combining Through-flow Modeling, Optimization Algorithm and Computational Fluid Dynamics Simulation

Document Type : Regular Article

Authors

1 Department of Mechanical Engineering, University of Suwon, Hwaseong, Gyeonggi, 18323, Republic of Korea

2 PIDOTECH, Songpa, Seoul, 05854, Republic of Korea

3 KWTech, Seongnam, Gyeonggi, 13497, Republic of Korea

4 Samwon E&B, Shiheung, Gyeonggi, 15078, Republic of Korea

10.47176/jafm.18.8.3325

Abstract

In this study, a high-efficiency axial fan design method and process are proposed by integrating the controlled blading design (CBD) method for the spanwise design of blade angles, the through-flow analysis method incorporating three-dimensional flow effects for performance prediction of the designed fan, and an optimization algorithm suitable for multi-variable problems. The main objective of this study is to obtain the optimal spanwise distribution of blade angles and chord length. To achieve this, the three-dimensional blade design process of the axial flow fan is established using the CBD model, in which the camber angle and setting angle along the spanwise direction are set as design variables, while the chord length along the spanwise direction is considered as another design variable. To predict the performance and efficiency of the designed fan, the through-flow analysis method is introduced, and the accuracy of flow and performance predictions using this method is verified by comparing with measurement results. A newly developed hybrid metaheuristic algorithm is applied as an optimization technique in the fan design and through-flow analysis program, enabling the optimal design of a high-efficiency axial flow fan. An optimization problem maximizing fan efficiency is defined and several design constraints are also set. The optimization algorithm is applied to the fan design and through-flow analysis program, achieving a very fast and simple optimization process and obtaining the optimal axial fan model. By comparing the optimal fan model with the initial fan model based on the free-vortex flow type, it is confirmed that fan efficiency is improved by 4.2 percentage points through this optimization. To verify the reliability of this optimization design method, CFD analysis, manufacturing, and testing are conducted for the optimized fan model. A comparison between the optimal design results and CFD calculation results demonstrates that this optimization method has very high predictive accuracy and design reliability. Furthermore, by comparing the design and CFD results of the optimized model with actual performance test results, the improvement in performance and efficiency through this optimization design method is validated. Additionally, the optimized axial fan derived in this study exhibits excellent performance characteristics, maintaining high efficiency and low power characteristics even under low flow conditions.

Keywords

Main Subjects


Adams, O., & Leonard, O. (2005). A Quasi-one dimensional model for axial compressor. ISABE proceedings.  https://hdl.handle.net/2268/20889
Angelini, G., Bonanni, T., Corsini, A., Delibra, G., Tieghi, L., & Volponi, D. (2017). Optimization of an axial fan for air cooled condensers. Energy Procedia, 126, 754-761. https://doi.org/10.1016/j.egypro.2017.08.236
ANSYS CFX user manual. (2023). ANSYS. https://www.ansys.com
Bamberger, K., & Carolus, T. (2012). Optimization of axial fans with highly swept blades with respect to losses and noise reduction. Noise Control Engineering Journal, 60(6), 716-725.  https://doi.org/10.3397/1.3701043
Benson, G. (2003). Improving Fan System Efficiency, US Department of Energy. https://docs.nrel.gov/docs/fy03osti/29166.pdf
Britsch, W. R., Osborn, W. M., & Laessig, M. R. (1979). Effects of diffusion factor, aspect ratio, and solidity on overall performance of 14 compressor middle stages. NASA TP-1523.
Choi, B. Y., Lee, H. J., Kim, S. W., Choi, D. H., Lee, C., & Yang, S. H. (2023). Optimization of axial fan with variable pitch using AADO technique. KSFM Winter Conference Proceedings. https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE11641361
Cohen, H., Rogers, G. F. C., Stranznicky, R., Saravamuttoo, H. I. H., & Nix, A. (2017). Gas Turbine Theory, Pearson.
Dixon, S. L. (1998). Fluid Mechanics and Thermodynamics of Turbomachinery, 4th edition, Buterworth & Heinemann.
Eastman, N. J., Kenneth, E. W., & Robert, M. P. (1935). The characteristics of 78 related airfoil sections from tests in the variable-density wind tunnel. NACA report No. 460.
Edward, D. R., Fanny, B. C., & Jean, C. B. (2021). Optimization of a high pressure industrial fan. ASME Turbo Expo 2021 proceedings. https://doi.org/10.1115/GT2021-58967
Fan, L., Xiawen, Z., Yaping, J., & Chuhua, Z. (2024). Automatic and rapid throughflow-based optimal design method for multi-stage axial-flow compressors. Springer.
FANDAS user manual, (2023). KWT solutions. http://www.kwtsolutions.com
Horlock, J. H., & Lakshminarayana, B. (1970). Secondary flows: Theory, experiment and applications in turbomachinery aerodynamics. Annual Review of Fluid Mechanics, 5, 247-280.
Kim, S. W., Choi, B. I., Choi, D. H., Lee, C., & Yang, S. H. (2022). A study on a screening method for dimensionality reduction of large fluid machine optimization problems. The KSFM Journal of Fluid Machinery, 25, 48-54. https://doi.org/10.5293/kfma.2022.25.3.048
Kim, S. W., Choi, B. I., Choi, D. H., Lee, C., & Yang, S. H. (2023). Multi-objective design optimization and data analysis considering the efficiency and variable environment of an axial fan. The KSFM Journal of Fluid Machinery, 26, 143-151. https://doi.org/10.5293/kfma.2023.26.6.143
Koch, C. C., & Smith Jr., L. H. (1976). Loss sources and magnitudes in axial-flow compressors. Journal of Engineering for Gas Turbines and Power, 98, 411-424. https://doi.org/10.1115/1.3446202
Lee, C. (2016). Integrated computer program for design, performance and noise analyses of automotive cooling axial flow fans. Technical report, Hanon systems.
Lee, C. (2021). A performance prediction method of the axial flow fans with blade sweep. The KSFM Journal of Fluid Machinery, 24, 24-29. https://doi.org/10.5293/kfma.2021.24.5.024
Lee, C., & Chung, M. K. (1991). Secondary flow loss and deviation models for through-flow analysis of axial flow turbomachinery. Mechanics Research Communications, 403-408. https://doi.org/10.1016/0093-6413(91)90053-Y
Lewis, R. I. (1996). Turbomachinery Performance Analysis, ARNOLD
PIAnO User manual, (2023). PIDOTEC. https://www.pidotech.com.
Pulliam, T. H., Nemec, M., Holst, T., Zingg, D. W., & Kwak, Dochan. (2003). Comparison of evolutionary (Genetic) algorithm and adjoint methods for multi-objective viscous airfoil optimizations. AIAA paper 2003-0298. https://arc.aiaa.org/doi/abs/10.2514/6.2003-298
Samad, A., & Kim, K. Y. (2009). Surrogate based optimization techniques for aerodynamic design of turbomachinery. International Journal of Fluid Machinery and Systems, 2, 179-188.  https://doi.org/10.5293/IJFMS.2009.2.2.179
Simon, J. F., & Leonard, O. (2006). Modeling of 3-D losses and deviations in a through flow analysis tool. Journal of Thermal Science, 16, 1-7. https://orbi.uliege.be/bitstream/2268/20885/1/Paper-2.pdf
Spuy, J. (1997). The design of a low-noise rotor-only axial flow fan series [Master of Engineering Thesis, Department of Mechanical Engineering, University of Stellenbosch]. http://hdl.handle.net/10019.1/20977
Spuy, S. J., & Backstorm, T. W. (2002). Performance of rotor-only axial fans designed for minimum exit kinetic energy. R & D Journal, 18, 63-69. http://hdl.handle.net/10019.1/75248
Wallis, R. A. (1983). Axial Flow Fans and Ducts, 2nd edition, John Wiley & Sons.