Author Index

A

  • Abadeh, A. Thermal Behavior of Carboxymethyl Cellulose Containing Alumina Nanoparticles at the Entrance Region of an Annulus [Volume 18, Issue 3, 2025, Pages 641-660]
  • Abed Zahmatkesh Pasand, S. Numerical Study of the Effect of Corona Discharge on Upward Wake Flow in the Horizontal Axis Wind Turbine Farm [Volume 18, Issue 1, 2025, Pages 32-44]
  • Abinaya, R. Computational Investigation of Fluidic Thrust Vectoring Control in Modified Vikas Nozzle [Volume 18, Issue 3, 2025, Pages 678-697]
  • Abraham, J. On the Multiple Steady Flow States in Spindle Shaped Geometry of Bridge Foundations [Volume 18, Issue 1, 2025, Pages 1-15]
  • Adami, M. Numerical Simulation of Coupled CFD-flight Mechanics and Taguchi’s Approach for Reliability and Safety Assessments in the Hot Stage Separation of a Launch Vehicle [Volume 18, Issue 8, 2025, Pages 2085-2094]
  • Adel, M. Study of Effect of Convergence Section Geometric on the Performance of a Sonic Nozzle [Volume 18, Issue 7, 2025, Pages 1669-1682]
  • Adhynugraha, M. I. Parametric Study on the Backward-facing Step Height in the Mixing Chamber of Fluidic Oscillator [Volume 18, Issue 5, 2025, Pages 1205-1216]
  • Ahmad, M. S. Numerical Simulation of Hydrodynamic Forces on an Underwater Vehicle Near the Free Surface [Volume 18, Issue 9, 2025, Pages 2239-2251]
  • Ahmadkhah, S. Aerodynamic Performance of Different Trailing-edge Serrations for High Reynolds Number Flows around Wing-flap System [Volume 18, Issue 4, 2025, Pages 1035-1047]
  • Ai, B. Study on the LES of Premixed Gas Flame Dynamics in a Weak Confinement Structure: The Influence of Continuous Obstacle Plates [Volume 18, Issue 4, 2025, Pages 864-879]
  • Akilli, H. Experimental and Numerical Study of Flow over Rectangular Cavity [Volume 18, Issue 9, 2025, Pages 2297-2308]
  • Aksouh, M. Numerical Study of the Compressible Air Flow Through a Two-output Fluidic Oscillator [Volume 18, Issue 4, 2025, Pages 880-891]
  • Aksoy, M. M. Experimental and Numerical Study of Flow over Rectangular Cavity [Volume 18, Issue 9, 2025, Pages 2297-2308]
  • Alam, M. M. Flow-induced Flutter Derivatives of Bridge Decks [Volume 18, Issue 4, 2025, Pages 835-849]
  • Alhamid, J. Experimental Investigation to Utilize Low-cost Sensors of Early Cavitation Prediction in Axial Pump Based on Acoustic and Vibration Approaches [Volume 18, Issue 1, 2025, Pages 16-31]
  • Ali, M. A. Numerical Investigation of Impinging Planar Shock Wave Interaction with Axisymmetric Slender Body [Volume 18, Issue 3, 2025, Pages 809-820]
  • Allouche, T. Performance Analysis of Grid Topologies and RANS Turbulence Models in Predicting Aerodynamic Drag Coefficient at Zero-yaw for an Artillery Projectile [Volume 18, Issue 3, 2025, Pages 585-600]
  • Al-Obaidi, A. R. Experimental Investigation to Utilize Low-cost Sensors of Early Cavitation Prediction in Axial Pump Based on Acoustic and Vibration Approaches [Volume 18, Issue 1, 2025, Pages 16-31]
  • Amahmid, A. MHD Free Convection in an Enclosure Loaded with Nanofluid and Partially Cross-heated [Volume 18, Issue 7, 2025, Pages 1720-1734]
  • Aminvash, E. On the Multiple Steady Flow States in Spindle Shaped Geometry of Bridge Foundations [Volume 18, Issue 1, 2025, Pages 1-15]
  • Amiri, H. Evaluating Diverse Meta-modeling Approaches for Predicting Performance Characteristics of a Twin Air Intake Based on Experimental Data [Volume 18, Issue 6, 2025, Pages 1364-1380]
  • An, H. Research on the Three-dimensional Transient Characteristics of the Hydraulic System during Load Rejection with Combined Regulation of Ball Valve and Guide Vanes in the Entire Hydraulic Passage of the Pumped Storage Power Stations [Volume 18, Issue 9, 2025, Pages 2180-2201]
  • Antony Athithan, A. Reacting Flow Characteristics of Wall-mounted Ramps in Strut-injection Scramjet Combustors under Varying Hydrogen Jet Pressures [Volume 18, Issue 4, 2025, Pages 850-863]
  • Anupama, P. A. Computational Investigation of Fluidic Thrust Vectoring Control in Modified Vikas Nozzle [Volume 18, Issue 3, 2025, Pages 678-697]
  • Anusindhiya, K. Investigation of Sonic Under-expanded Jets Using Slotted Rectangular Mechanical Tabs [Volume 18, Issue 3, 2025, Pages 631-640]
  • Arun Prasad, R. Experimental Investigation on the Effect of Ring Tab on Mixing Enhancement of Subsonic Jets [Volume 18, Issue 7, 2025, Pages 1707-1719]
  • Asayesh, M. R. Improving Wind Turbine Power with Boundary Layer Suction [Volume 18, Issue 2, 2025, Pages 363-373]

B

  • Bade, M. Effect of Disk Friction Loss Reduction on Flow Phenomena in Low-specific Speed Centrifugal Pump: An Experimental and Numerical Approach [Volume 18, Issue 6, 2025, Pages 1430-1445]
  • Bae, Y. S. Back-turn Approach for Optimal Operation of Booster Pump Systems [Volume 18, Issue 9, 2025, Pages 2202-2211]
  • Baharlouei, O. Examining the Impact of Using Hemispherical Dimples-protrusions on Heat Transfer and Pressure Drop in the Finned-tube Heat Exchanger with Different Configurations [Volume 18, Issue 7, 2025, Pages 1809-1822]
  • Bai, L. Assessing Energy Loss and Entropy Production in a Centrifugal Pump with Various Impeller Blade Trailing Edges [Volume 18, Issue 2, 2025, Pages 518-534]
  • Bak Khoshnevis, A. A Design and Optimization of Multi-slot Diffusers for Power Augmentation in Small Axial Flow Wind Turbines [Volume 18, Issue 6, 2025, Pages 1576-1595]
  • Banerjee, J. Effect of Microchannel Depth on Subcooled Flow Boiling Instability and Heat Transfer [Volume 18, Issue 3, 2025, Pages 698-709]
  • Banerjee, R. Integration of RCCI and CDF Combustion in Conventional Diesel Engine Using CNG-diesel Fuels: An Experimental Study [Volume 18, Issue 1, 2025, Pages 87-97]
  • Barati, E. Flow-induced Flutter Derivatives of Bridge Decks [Volume 18, Issue 4, 2025, Pages 835-849]
  • Bayraktar, S. Airwake Characteristics of NATO-Generic Destroyer: A Numerical Study [Volume 18, Issue 1, 2025, Pages 112-130]
  • Bekhti, A. Numerical Simulations of the Effect on Aerodynamic Performances of the Inter-propeller Distance in a Contra-rotating Propeller [Volume 18, Issue 4, 2025, Pages 947-959]
  • Bekkai, R. Aerodynamic Optimization of 3D Micro HAWT Blade via RSM [Volume 18, Issue 2, 2025, Pages 504-517]
  • Belguebli, E. Experimental Study of the Influence of a Blowing Grid on Turbulent Jets Applied to Air Conditioning Systems [Volume 18, Issue 8, 2025, Pages 2043-2052]
  • Benaouda Zouaoui, B. Analysis of Dual Bell Nozzle Configurations: Design Parameters and Performance Measurements [Volume 18, Issue 7, 2025, Pages 1767-1781]
  • Bentrad, H. Numerical Simulations of the Effect on Aerodynamic Performances of the Inter-propeller Distance in a Contra-rotating Propeller [Volume 18, Issue 4, 2025, Pages 947-959]
  • Bhanu Kumari, M. Computational Fluid Dynamics Studies on a Centrifugal Compressor Stage with Twisted Vanes of a Low Solidity Diffuser [Volume 18, Issue 9, 2025, Pages 2226-2238]
  • Bhat, A. Multiphase Flow Simulations to Explore Novel Technique of Air Injection to Mitigate Silt Erosion in Hydro Turbines [Volume 18, Issue 2, 2025, Pages 468-484]
  • Bhupathi, P. Parametric Analysis of Cooling of Air Inside a Ventilated Enclosure - A Convenient Solution to Achieve Single Room Multiple Thermal Zones for Indoor Farming [Volume 18, Issue 1, 2025, Pages 171-190]
  • Biswas, A. Study of Stage Gap for a 2-bladed 2-stage Savonius-like-hydro-kinetic Turbine Performance Involving End Plates and Overlapping [Volume 18, Issue 4, 2025, Pages 904-918]
  • Biswas, S. Integration of RCCI and CDF Combustion in Conventional Diesel Engine Using CNG-diesel Fuels: An Experimental Study [Volume 18, Issue 1, 2025, Pages 87-97]
  • Blanco-Díaz, E. G. Numerical Analysis Used to Predict the Spread of COVID-19 in a Classroom: TecNM Campus Sur de Guanajuato Case Study [Volume 18, Issue 7, 2025, Pages 1695-1706]
  • Boset, L. D. Pressure Drop Due to Cyclone Separator in Positive Dilute Phase Pneumatic Teff Grain Conveyor [Volume 18, Issue 2, 2025, Pages 317-331]
  • Bouhelal, A. Impact of Surface Roughness on the Aerodynamic Efficiency of Wind Turbines: A New CFD-based Correlation [Volume 18, Issue 2, 2025, Pages 438-449]
  • Braikia, M. Experimental Study of the Influence of a Blowing Grid on Turbulent Jets Applied to Air Conditioning Systems [Volume 18, Issue 8, 2025, Pages 2043-2052]
  • Buch, V. Impact of Compression Ratio on Combustion Characteristics of VCR-CRDI Type Diesel Engine Fueled with Moringa Oleifera Methyl Ester [Volume 18, Issue 3, 2025, Pages 787-797]
  • Bumrungpetch, J. CFD Simulation and Robust Design Optimization of the Valve Seat and Orifice Plate in Port Fuel Injector [Volume 18, Issue 7, 2025, Pages 1750-1766]
  • Byun, H. T. High-efficiency Axial Flow Fan Design by Combining Through-flow Modeling, Optimization Algorithm and Computational Fluid Dynamics Simulation [Volume 18, Issue 8, 2025, Pages 1953-1963]

C

  • Can, I. Optimal Design and Analysis of the Cooled Turbine Blade in Gas Turbines with CFD [Volume 18, Issue 1, 2025, Pages 60-72]
  • Cao, Y. Numerical Study of the Effect of Rail Modelling Method on Train Aerodynamic Performance and Slipstream [Volume 18, Issue 1, 2025, Pages 260-273]
  • Catrawedarma, I. Size Distribution and Mean Diameter of Microbubbles in Different Types of Ejector Bubble Generators [Volume 18, Issue 6, 2025, Pages 1459-1469]
  • Chambalile, M. Flow-induced Flutter Derivatives of Bridge Decks [Volume 18, Issue 4, 2025, Pages 835-849]
  • Chang, J. Investigation of Wing Lift Enhancement by Combination of Plasma Jet Actuator and Synthetic Jet Actuator [Volume 18, Issue 5, 2025, Pages 1349-1363]
  • Chang, J. Investigation of the Influence of Different Flapping Wing Motion Characteristics on Aerodynamic Parameters under Incoming Flow [Volume 18, Issue 6, 2025, Pages 1596-1616]
  • Chaudhari, A. D. Parametric Analysis of Cooling of Air Inside a Ventilated Enclosure - A Convenient Solution to Achieve Single Room Multiple Thermal Zones for Indoor Farming [Volume 18, Issue 1, 2025, Pages 171-190]
  • Chehat, T. Analysis of Dual Bell Nozzle Configurations: Design Parameters and Performance Measurements [Volume 18, Issue 7, 2025, Pages 1767-1781]
  • Chen, A. Assessment of Erosion Wear on a Reducing Pipe in a Propulsion System Using the Eulerian-Lagrangian Method [Volume 18, Issue 9, 2025, Pages 2282-2296]
  • Chen, B. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Chen, J. Effects of Inlet Tip Clearance on Internal Flow Characteristic and Aerodynamic Performance of Centrifugal Compressor [Volume 18, Issue 1, 2025, Pages 274-289]
  • Chen, J. Design and Flow Field Analysis of Extendable Leaching-optimized Cavern Construction Device for Salt Cavern Gas Storage [Volume 18, Issue 9, 2025, Pages 2349-2360]
  • Chen, K. Numerical Study of Vertical Axis Wind Turbine with Spoiler Based on Orthogonal Experiments [Volume 18, Issue 1, 2025, Pages 159-170]
  • Chen, K. Large Eddy Simulation of Swirl Topology Evolution in Strong Oxidant Jet Milling Force Field [Volume 18, Issue 2, 2025, Pages 374-388]
  • Chen, K. Parameter Optimisation of a H-type Three-blade Contra-rotating Vertical-axis Wind Turbine at Low Tip-speed Ratio [Volume 18, Issue 6, 2025, Pages 1470-1482]
  • Chen, K. Aeroelastic Analysis of a Wind Turbine with a Bamboo Honeycomb Structural Web [Volume 18, Issue 8, 2025, Pages 2122-2136]
  • Chen, L. Numerical Study of Fluid Flow, Heat Transfer and Parameter Coupling in a Spider Web Microchannel Heat Sink [Volume 18, Issue 7, 2025, Pages 1683-1694]
  • Chen, Q. Y. Study and Evaluation of the Effects of Bionic Groove Structures Applied to Wheel Spokes on the Aerodynamics of a Car Model [Volume 18, Issue 6, 2025, Pages 1652-1668]
  • Chen, W. Experimental Study of the Flow Characteristics on Corrugated Wall with Perforation [Volume 18, Issue 1, 2025, Pages 98-111]
  • Chen, X. Behavior of a Glycerol Aqueous Droplet Impacting a Thin Water Film [Volume 18, Issue 3, 2025, Pages 798-808]
  • Chen, Y. Assessing Energy Loss and Entropy Production in a Centrifugal Pump with Various Impeller Blade Trailing Edges [Volume 18, Issue 2, 2025, Pages 518-534]
  • Chen, Y. Dynamic Characteristics of Near-wall Single Bubble Collapse-induced Shock Waves [Volume 18, Issue 3, 2025, Pages 617-630]
  • Chen, Y. A Rapid Design Method for Centrifugal Pump Impellers Based on Machine Learning [Volume 18, Issue 7, 2025, Pages 1735-1749]
  • Chen, Z. Effects of Different Attack Angles and Guide Vane Numbers on the Vortex-solid Interaction Noise of Axial Flow Fan [Volume 18, Issue 1, 2025, Pages 290-303]
  • Cheng, H. Rapid Prediction of Ice Accretion on Swept Wings Based on Proper Orthogonal Decomposition and Surrogate Modelling [Volume 18, Issue 8, 2025, Pages 2026-2042]
  • Cheng, S. Analysis of Sealing Performance and Mechanism of Biomimetic Superoleophobic Surface Structure [Volume 18, Issue 7, 2025, Pages 1938-1952]
  • Chhatbar, J. Integration of RCCI and CDF Combustion in Conventional Diesel Engine Using CNG-diesel Fuels: An Experimental Study [Volume 18, Issue 1, 2025, Pages 87-97]
  • Choi, Y. D. Back-turn Approach for Optimal Operation of Booster Pump Systems [Volume 18, Issue 9, 2025, Pages 2202-2211]
  • Chu, W. Investigation of Compressor Surge Process and Flow Field Details Using Numerical Simulation [Volume 18, Issue 3, 2025, Pages 756-768]
  • Chu, W. Influence of Clearances in Variable Guide Vanes and Stators on the Performance of a Multi-stage Compressor and Its Flow Control [Volume 18, Issue 6, 2025, Pages 1524-1533]
  • Coskun, G. Experimental and Computational Fluid Dynamics Simulation Study on the Performance of a Two-stroke Aviation Engine: A Comparative Analysis of Turbulence Models and Mesh Strategies [Volume 18, Issue 8, 2025, Pages 1993-2010]

D

  • Daneshfaraz, R. On the Multiple Steady Flow States in Spindle Shaped Geometry of Bridge Foundations [Volume 18, Issue 1, 2025, Pages 1-15]
  • Daneshmand, A. H. Longitudinal Sloshing Behaviors of Horizontal Cylindrical Liquid Tanks Subjected to Harmonic and Seismic Excitations [Volume 18, Issue 1, 2025, Pages 241-259]
  • Daopiset, P. CFD Simulation and Robust Design Optimization of the Valve Seat and Orifice Plate in Port Fuel Injector [Volume 18, Issue 7, 2025, Pages 1750-1766]
  • Davari, A. R. A New Aspect of the Ground Effect: The Two-way Interactions between an Airplane Flying in the Vicinity of Sea Water and the Free Surface Waves [Volume 18, Issue 9, 2025, Pages 2268-2281]
  • Debele, Z. A. Pressure Drop Due to Cyclone Separator in Positive Dilute Phase Pneumatic Teff Grain Conveyor [Volume 18, Issue 2, 2025, Pages 317-331]
  • Deb Roy, P. Effect of Triangular Lip Wall on the Performance of a Stationary Oscillating Water Column Device at Various Wave Conditions Using Reynolds-averaged Navier-Stokes (RANS) Model [Volume 18, Issue 8, 2025, Pages 2011-2025]
  • Delil, Y. Experimental and Computational Fluid Dynamics Simulation Study on the Performance of a Two-stroke Aviation Engine: A Comparative Analysis of Turbulence Models and Mesh Strategies [Volume 18, Issue 8, 2025, Pages 1993-2010]
  • Demir, U. Experimental and Computational Fluid Dynamics Simulation Study on the Performance of a Two-stroke Aviation Engine: A Comparative Analysis of Turbulence Models and Mesh Strategies [Volume 18, Issue 8, 2025, Pages 1993-2010]
  • Deng, Z. G. Contribution of Suspension Bogies’ Aerodynamic Loads to the Dynamic Characteristics of a High-temperature Superconducting Maglev Train Running under Crosswind [Volume 18, Issue 6, 2025, Pages 1617-1638]
  • Deng, Z. L. Numerical Analysis of Fluid‒solid Interactions in a 3D Piezoelectric Micropump Featuring a Passive Check Valve [Volume 18, Issue 7, 2025, Pages 1923-1937]
  • Dhamodaran, K. Experimental Investigation on the Effect of Ring Tab on Mixing Enhancement of Subsonic Jets [Volume 18, Issue 7, 2025, Pages 1707-1719]
  • Dhiman, P. Multiphase Flow Simulations to Explore Novel Technique of Air Injection to Mitigate Silt Erosion in Hydro Turbines [Volume 18, Issue 2, 2025, Pages 468-484]
  • Ding, N. Investigation of Wing Lift Enhancement by Combination of Plasma Jet Actuator and Synthetic Jet Actuator [Volume 18, Issue 5, 2025, Pages 1349-1363]
  • Ding, Y. Contribution of Suspension Bogies’ Aerodynamic Loads to the Dynamic Characteristics of a High-temperature Superconducting Maglev Train Running under Crosswind [Volume 18, Issue 6, 2025, Pages 1617-1638]
  • Dirgenali, M. Enhancement of Savonius Wind Turbine Performance Through Blade Optimization [Volume 18, Issue 5, 2025, Pages 1174-1188]
  • Dogrul, A. Airwake Characteristics of NATO-Generic Destroyer: A Numerical Study [Volume 18, Issue 1, 2025, Pages 112-130]
  • Doğruyol, Z. Investigation of a Vacuum Ejector Used in a Dynamic Function Vehicle Tire Air Control Valve [Volume 18, Issue 9, 2025, Pages 2361-2376]
  • Dong, B. Characteristics of an Internal Dielectric Barrier Discharge Plasma-induced Blowing Device [Volume 18, Issue 4, 2025, Pages 1023-1034]
  • Doshi, A. Effect of Disk Friction Loss Reduction on Flow Phenomena in Low-specific Speed Centrifugal Pump: An Experimental and Numerical Approach [Volume 18, Issue 6, 2025, Pages 1430-1445]
  • Driouche, M. Numerical Investigation of the Impact of a Hollow Ceramic Droplet on Metallic Substrate [Volume 18, Issue 9, 2025, Pages 2212-2225]
  • Du, J. Rapid Prediction of Ice Accretion on Swept Wings Based on Proper Orthogonal Decomposition and Surrogate Modelling [Volume 18, Issue 8, 2025, Pages 2026-2042]
  • Du, S. Effect of Motor Blockage on Transient Characteristics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 4, 2025, Pages 1064-1085]
  • Duan, T. C. Investigation of the Flow Field Characteristics of Aortic Bileaflet Mechanical Heart Valves with Different Leaflet Shapes Using PIV [Volume 18, Issue 4, 2025, Pages 1048-1063]
  • Duan, Y. Comprehensive Research on the Effects of Different Launch Conditions on Pump-jet Propulsor Performance [Volume 18, Issue 4, 2025, Pages 960-975]
  • Dwi Pranowo, D. Size Distribution and Mean Diameter of Microbubbles in Different Types of Ejector Bubble Generators [Volume 18, Issue 6, 2025, Pages 1459-1469]
  • Dwivedi, V. K. Experimental Evaluation of Hydraulic Jump Characteristics in Gradually Expanding Sloping Channel [Volume 18, Issue 7, 2025, Pages 1843-1860]

E

  • Eftekhari, S. A New Aspect of the Ground Effect: The Two-way Interactions between an Airplane Flying in the Vicinity of Sea Water and the Free Surface Waves [Volume 18, Issue 9, 2025, Pages 2268-2281]
  • Elçi, S. Enhancement of Savonius Wind Turbine Performance Through Blade Optimization [Volume 18, Issue 5, 2025, Pages 1174-1188]
  • El Ganaoui, M. Numerical Investigation of the Impact of a Hollow Ceramic Droplet on Metallic Substrate [Volume 18, Issue 9, 2025, Pages 2212-2225]
  • Erturk, E. Investigation of a Vacuum Ejector Used in a Dynamic Function Vehicle Tire Air Control Valve [Volume 18, Issue 9, 2025, Pages 2361-2376]
  • Estrada-Rojo, L. Numerical Analysis Used to Predict the Spread of COVID-19 in a Classroom: TecNM Campus Sur de Guanajuato Case Study [Volume 18, Issue 7, 2025, Pages 1695-1706]

F

  • Fadla, F. Intelligent Prediction of Separated Flow Dynamics using Machine Learning [Volume 18, Issue 2, 2025, Pages 399-418]
  • Fakih, K. Shape Optimization of Isosceles Triangle Facades for Improving the Aerodynamics of a Tall Building [Volume 18, Issue 5, 2025, Pages 1231-1245]
  • Fan, J. S. Simulation of the Separation of Homogeneous Whole Blood in a Spin-up Rotating Cylindrical Container [Volume 18, Issue 1, 2025, Pages 73-86]
  • Fazeli, H. Experimental Dynamic Stability Investigation on Orion Entry Capsule in Supersonic Flow [Volume 18, Issue 5, 2025, Pages 1301-1311]
  • Fellague Chebra, A. Experimental Study of the Influence of a Blowing Grid on Turbulent Jets Applied to Air Conditioning Systems [Volume 18, Issue 8, 2025, Pages 2043-2052]
  • Feng, Y. Numerical Study of a Supersonic Nozzle Gas Jet Laden with a Dry Powder Fire-extinguishing Agent Injected from a Bypass Injector [Volume 18, Issue 4, 2025, Pages 1098-1114]
  • Ferfouri, A. Performance Analysis of Grid Topologies and RANS Turbulence Models in Predicting Aerodynamic Drag Coefficient at Zero-yaw for an Artillery Projectile [Volume 18, Issue 3, 2025, Pages 585-600]
  • Fu, Q. Comprehensive Research on the Effects of Different Launch Conditions on Pump-jet Propulsor Performance [Volume 18, Issue 4, 2025, Pages 960-975]
  • Fu, Y. Numerical Investigation on the Cavitating Flow and the Cavitation-induced Noise in the Pump-jet Propeller [Volume 18, Issue 2, 2025, Pages 419-437]
  • Fu, Y. Research on the Influence of Jet Control Point Distribution on Gas‒liquid Separation Characteristics in a Helical Axial-flow Multiphase Pump [Volume 18, Issue 5, 2025, Pages 1285-1300]

G

  • Gao, F. Investigation of Wing Lift Enhancement by Combination of Plasma Jet Actuator and Synthetic Jet Actuator [Volume 18, Issue 5, 2025, Pages 1349-1363]
  • Gao, J. Study on the LES of Premixed Gas Flame Dynamics in a Weak Confinement Structure: The Influence of Continuous Obstacle Plates [Volume 18, Issue 4, 2025, Pages 864-879]
  • García-Guendulain, J. M. Numerical Analysis Used to Predict the Spread of COVID-19 in a Classroom: TecNM Campus Sur de Guanajuato Case Study [Volume 18, Issue 7, 2025, Pages 1695-1706]
  • Ghaemi Osgouie, S. K. Numerical Study of the Effect of Corona Discharge on Upward Wake Flow in the Horizontal Axis Wind Turbine Farm [Volume 18, Issue 1, 2025, Pages 32-44]
  • Gohil, P. P. Computationally Investigate Low Velocity Hydrokinetic Turbines with Variant Systems [Volume 18, Issue 3, 2025, Pages 769-786]
  • González-Durán, J. E. E. Numerical Analysis Used to Predict the Spread of COVID-19 in a Classroom: TecNM Campus Sur de Guanajuato Case Study [Volume 18, Issue 7, 2025, Pages 1695-1706]
  • Gopal, P. M. Studies on the Effect of Baffle Plates in Settling Chamber Performance by CFD and Experimental Analysis [Volume 18, Issue 3, 2025, Pages 567-584]
  • Govindaraju, V. R. Computational Fluid Dynamics Studies on a Centrifugal Compressor Stage with Twisted Vanes of a Low Solidity Diffuser [Volume 18, Issue 9, 2025, Pages 2226-2238]
  • Gu, F. Numerical Study on the Interaction Characteristics between Attached Cavitation and Velocity Boundary Layer under Different Working Conditions [Volume 18, Issue 1, 2025, Pages 45-59]
  • Gu, Y. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]
  • Guan, H. Numerical Study of a Supersonic Nozzle Gas Jet Laden with a Dry Powder Fire-extinguishing Agent Injected from a Bypass Injector [Volume 18, Issue 4, 2025, Pages 1098-1114]
  • Guan, Q. Analysis of Sealing Performance and Mechanism of Biomimetic Superoleophobic Surface Structure [Volume 18, Issue 7, 2025, Pages 1938-1952]
  • Guo, B. Study on the LES of Premixed Gas Flame Dynamics in a Weak Confinement Structure: The Influence of Continuous Obstacle Plates [Volume 18, Issue 4, 2025, Pages 864-879]
  • Guo, H. Numerical Modal Analysis of the Correlation Between Spanwise Vortex Shedding and Far-field Aeolian Noise for Square and Circular Wall-mounted Cylinders [Volume 18, Issue 2, 2025, Pages 450-467]
  • Guo, P. Passive Drag Reduction Optimization for Complex Commercial Vehicle Models [Volume 18, Issue 6, 2025, Pages 1639-1651]
  • Guo, Q. Rapid Prediction of Ice Accretion on Swept Wings Based on Proper Orthogonal Decomposition and Surrogate Modelling [Volume 18, Issue 8, 2025, Pages 2026-2042]
  • Guo, R. Spatiotemporal Cooperative Effect Between the Time-asymmetric Ratio of Oscillating Trailing Edge Flap and Pivot Location on the Aerodynamics of a Pitching Airfoil [Volume 18, Issue 7, 2025, Pages 1782-1795]
  • Guo, Y. T. Effect of Coolant Inlet Mode on Heat Transfer Characteristics of a Twin-web Turbine Disc Cavity [Volume 18, Issue 4, 2025, Pages 933-946]
  • Guo, Z. Influence of Clearances in Variable Guide Vanes and Stators on the Performance of a Multi-stage Compressor and Its Flow Control [Volume 18, Issue 6, 2025, Pages 1524-1533]
  • Guo, Z. Experimental Investigation of Fuel Film Characteristics after Spray Impacting on Ultra-cold Surface [Volume 18, Issue 6, 2025, Pages 1550-1562]
  • Guo, Z. Investigation of the Influence of Different Flapping Wing Motion Characteristics on Aerodynamic Parameters under Incoming Flow [Volume 18, Issue 6, 2025, Pages 1596-1616]
  • Gupta, S. K. Experimental Evaluation of Hydraulic Jump Characteristics in Gradually Expanding Sloping Channel [Volume 18, Issue 7, 2025, Pages 1843-1860]

H

  • Hamaidia, W. Analysis of Dual Bell Nozzle Configurations: Design Parameters and Performance Measurements [Volume 18, Issue 7, 2025, Pages 1767-1781]
  • Hamlaoui, M. N. Impact of Surface Roughness on the Aerodynamic Efficiency of Wind Turbines: A New CFD-based Correlation [Volume 18, Issue 2, 2025, Pages 438-449]
  • Han, W. Dynamic Characteristics of Near-wall Single Bubble Collapse-induced Shock Waves [Volume 18, Issue 3, 2025, Pages 617-630]
  • Han, W. Research on the Influence of Jet Control Point Distribution on Gas‒liquid Separation Characteristics in a Helical Axial-flow Multiphase Pump [Volume 18, Issue 5, 2025, Pages 1285-1300]
  • Han, W. Numerical Investigation of the Impact of Intake Pipelines on the Performance and Flow Characteristics of a Centrifugal Compressor [Volume 18, Issue 6, 2025, Pages 1483-1501]
  • Han, X. Numerical Investigation of Clocking Effect on Fluctuating Characters and Radial Force within Impeller for a Centrifugal Pump [Volume 18, Issue 3, 2025, Pages 549-566]
  • Han, X. D. Effects of Solid Particles at Varying Concentrations on Hydrodynamic Cavitation Evolution in a Nozzle [Volume 18, Issue 2, 2025, Pages 485-503]
  • Han, Y. Study on the LES of Premixed Gas Flame Dynamics in a Weak Confinement Structure: The Influence of Continuous Obstacle Plates [Volume 18, Issue 4, 2025, Pages 864-879]
  • Hao, B. Study on the LES of Premixed Gas Flame Dynamics in a Weak Confinement Structure: The Influence of Continuous Obstacle Plates [Volume 18, Issue 4, 2025, Pages 864-879]
  • Hao, J. Numerical Investigation on the Cavitating Flow and the Cavitation-induced Noise in the Pump-jet Propeller [Volume 18, Issue 2, 2025, Pages 419-437]
  • Hao, Y. Dynamic Characteristics of Near-wall Single Bubble Collapse-induced Shock Waves [Volume 18, Issue 3, 2025, Pages 617-630]
  • Hao, Y. Study on the Shock Wave Characteristics of Spherical and Cylindrical Explosives in Near-field Underwater Explosion [Volume 18, Issue 4, 2025, Pages 892-903]
  • Hao, Z. Numerical Study of Vertical Axis Wind Turbine with Spoiler Based on Orthogonal Experiments [Volume 18, Issue 1, 2025, Pages 159-170]
  • Hao, Z. Extraction for the Evolution Features of Cavitation Cloud Induced by the Self-excited Oscillating Jet [Volume 18, Issue 9, 2025, Pages 2377-2388]
  • Haoran, Z. Investigation of Geometric Characteristics on the Lubricant Performance of Thrust Bearing with Cavitation [Volume 18, Issue 7, 2025, Pages 1833-1842]
  • Harinaldi, H. Parametric Study on the Backward-facing Step Height in the Mixing Chamber of Fluidic Oscillator [Volume 18, Issue 5, 2025, Pages 1205-1216]
  • Harish Ragavendra, T. Computational Investigation of Fluidic Thrust Vectoring Control in Modified Vikas Nozzle [Volume 18, Issue 3, 2025, Pages 678-697]
  • Hasim, F. Parametric Study on the Backward-facing Step Height in the Mixing Chamber of Fluidic Oscillator [Volume 18, Issue 5, 2025, Pages 1205-1216]
  • Hasnan, M. A. A. Numerical Simulation of Hydrodynamic Forces on an Underwater Vehicle Near the Free Surface [Volume 18, Issue 9, 2025, Pages 2239-2251]
  • Hasnaoui, A. MHD Free Convection in an Enclosure Loaded with Nanofluid and Partially Cross-heated [Volume 18, Issue 7, 2025, Pages 1720-1734]
  • Hasnaoui, M. MHD Free Convection in an Enclosure Loaded with Nanofluid and Partially Cross-heated [Volume 18, Issue 7, 2025, Pages 1720-1734]
  • Hazar, O. Enhancement of Savonius Wind Turbine Performance Through Blade Optimization [Volume 18, Issue 5, 2025, Pages 1174-1188]
  • He, H. B. Effect of Baffle Structure for the Particle Deposition Characteristics of in the Novel Cavity Upstream of the Pre-swirl Nozzles [Volume 18, Issue 9, 2025, Pages 2309-2320]
  • He, Z. Numerical Analysis of Droplet Impact on Liquid Film with Different Surface Structures [Volume 18, Issue 6, 2025, Pages 1512-1523]
  • Hong, J. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]
  • Hou, J. Optimization of Structural Parameters and Cavitation Suppression in Control Valves Based on P-WOA [Volume 18, Issue 8, 2025, Pages 2095-2107]
  • Hou, X. Numerical Investigation on the Cavitating Flow and the Cavitation-induced Noise in the Pump-jet Propeller [Volume 18, Issue 2, 2025, Pages 419-437]
  • Hou, Z. Analysis of Sealing Performance and Mechanism of Biomimetic Superoleophobic Surface Structure [Volume 18, Issue 7, 2025, Pages 1938-1952]
  • Hristov, N. Performance Analysis of Grid Topologies and RANS Turbulence Models in Predicting Aerodynamic Drag Coefficient at Zero-yaw for an Artillery Projectile [Volume 18, Issue 3, 2025, Pages 585-600]
  • Hu, C. H. Multi-objective Optimization of Combined Internal Components with a Vortex Stabilizer and Apex Cone for Performance Improvement of Cyclone Separator [Volume 18, Issue 8, 2025, Pages 2066-2084]
  • Hu, H. Parameter Optimisation of a H-type Three-blade Contra-rotating Vertical-axis Wind Turbine at Low Tip-speed Ratio [Volume 18, Issue 6, 2025, Pages 1470-1482]
  • Hu, H. Aeroelastic Analysis of a Wind Turbine with a Bamboo Honeycomb Structural Web [Volume 18, Issue 8, 2025, Pages 2122-2136]
  • Hu, S. A Study on a Semi-empirical Model for the Local Loss Coefficient of Small Angle Contraction Pipes [Volume 18, Issue 6, 2025, Pages 1446-1458]
  • Hu, X. Passive Drag Reduction Optimization for Complex Commercial Vehicle Models [Volume 18, Issue 6, 2025, Pages 1639-1651]
  • Huang, L. Influence of Clearances in Variable Guide Vanes and Stators on the Performance of a Multi-stage Compressor and Its Flow Control [Volume 18, Issue 6, 2025, Pages 1524-1533]
  • Huang, N. Numerical Investigation of the Impact of Intake Pipelines on the Performance and Flow Characteristics of a Centrifugal Compressor [Volume 18, Issue 6, 2025, Pages 1483-1501]
  • Huang, T. H. Study and Evaluation of the Effects of Bionic Groove Structures Applied to Wheel Spokes on the Aerodynamics of a Car Model [Volume 18, Issue 6, 2025, Pages 1652-1668]
  • Huang, W. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Huang, Z. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]

I

  • Iskandar, W. Parametric Study on the Backward-facing Step Height in the Mixing Chamber of Fluidic Oscillator [Volume 18, Issue 5, 2025, Pages 1205-1216]
  • Islam, M. D. Back-turn Approach for Optimal Operation of Booster Pump Systems [Volume 18, Issue 9, 2025, Pages 2202-2211]

J

  • Jahangirian, A. Aerodynamic Performance of Different Trailing-edge Serrations for High Reynolds Number Flows around Wing-flap System [Volume 18, Issue 4, 2025, Pages 1035-1047]
  • Jai Pranesh, K. S. Computational Investigation of Fluidic Thrust Vectoring Control in Modified Vikas Nozzle [Volume 18, Issue 3, 2025, Pages 678-697]
  • Jerković, D. D. Performance Analysis of Grid Topologies and RANS Turbulence Models in Predicting Aerodynamic Drag Coefficient at Zero-yaw for an Artillery Projectile [Volume 18, Issue 3, 2025, Pages 585-600]
  • Jeyakumar, S. Reacting Flow Characteristics of Wall-mounted Ramps in Strut-injection Scramjet Combustors under Varying Hydrogen Jet Pressures [Volume 18, Issue 4, 2025, Pages 850-863]
  • Ji, H. Research on Axisymmetric Vectoring Exhaust Nozzle Dynamic Characteristics Considering Aerodynamic and Thermal Loads Effect [Volume 18, Issue 6, 2025, Pages 1381-1395]
  • Ji, L. Numerical Study on the Interaction Characteristics between Attached Cavitation and Velocity Boundary Layer under Different Working Conditions [Volume 18, Issue 1, 2025, Pages 45-59]
  • Ji, L. A Rapid Design Method for Centrifugal Pump Impellers Based on Machine Learning [Volume 18, Issue 7, 2025, Pages 1735-1749]
  • Jia, H. Numerical Research of the Water Entry of Hyperelastic Spheres Within Low Froude Numbers [Volume 18, Issue 3, 2025, Pages 821-834]
  • Jiang, E. Numerical Investigation of Clocking Effect on Fluctuating Characters and Radial Force within Impeller for a Centrifugal Pump [Volume 18, Issue 3, 2025, Pages 549-566]
  • Jiang, F. Research on the Non-uniform Flow Characteristics in a Screw Mixed-flow Deep-sea Mining Pump [Volume 18, Issue 7, 2025, Pages 1861-1872]
  • Jiang, R. P. Numerical Modal Analysis of the Correlation Between Spanwise Vortex Shedding and Far-field Aeolian Noise for Square and Circular Wall-mounted Cylinders [Volume 18, Issue 2, 2025, Pages 450-467]
  • Jiang, S. Effect Mechanism of Splitter Blade Length on the Energy Performance of Centrifugal Pump [Volume 18, Issue 8, 2025, Pages 2108-2121]
  • Jiayuan, C. Investigation of Geometric Characteristics on the Lubricant Performance of Thrust Bearing with Cavitation [Volume 18, Issue 7, 2025, Pages 1833-1842]
  • Jin, S. Experimental Investigation of Fuel Film Characteristics after Spray Impacting on Ultra-cold Surface [Volume 18, Issue 6, 2025, Pages 1550-1562]
  • Jin, Y. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]
  • Jiwane, P. D. Effect of Gate Opening Height on the Hydraulic Jump Characteristics in an Open Channel [Volume 18, Issue 6, 2025, Pages 1502-1511]
  • Joshi, V. V. Parametric Analysis of Cooling of Air Inside a Ventilated Enclosure - A Convenient Solution to Achieve Single Room Multiple Thermal Zones for Indoor Farming [Volume 18, Issue 1, 2025, Pages 171-190]
  • Julian, J. Parametric Study on the Backward-facing Step Height in the Mixing Chamber of Fluidic Oscillator [Volume 18, Issue 5, 2025, Pages 1205-1216]
  • Juntasaro, E. CFD Simulation and Robust Design Optimization of the Valve Seat and Orifice Plate in Port Fuel Injector [Volume 18, Issue 7, 2025, Pages 1750-1766]

K

  • Kaçar, K. Enhancement of Savonius Wind Turbine Performance Through Blade Optimization [Volume 18, Issue 5, 2025, Pages 1174-1188]
  • Kailei, L. Investigation of Geometric Characteristics on the Lubricant Performance of Thrust Bearing with Cavitation [Volume 18, Issue 7, 2025, Pages 1833-1842]
  • Kang, H. J. Back-turn Approach for Optimal Operation of Booster Pump Systems [Volume 18, Issue 9, 2025, Pages 2202-2211]
  • Kang, Y. Numerical Study of Fluid Flow, Heat Transfer and Parameter Coupling in a Spider Web Microchannel Heat Sink [Volume 18, Issue 7, 2025, Pages 1683-1694]
  • Kansara, S. T. Effect of Height on the Supersonic Flow over a Blunt Vertical Fin [Volume 18, Issue 2, 2025, Pages 389-398]
  • Kao-Walter, S. Numerical Study of Fluid Flow, Heat Transfer and Parameter Coupling in a Spider Web Microchannel Heat Sink [Volume 18, Issue 7, 2025, Pages 1683-1694]
  • Karamodin, A. Longitudinal Sloshing Behaviors of Horizontal Cylindrical Liquid Tanks Subjected to Harmonic and Seismic Excitations [Volume 18, Issue 1, 2025, Pages 241-259]
  • Kari, A. V. Performance Analysis of Grid Topologies and RANS Turbulence Models in Predicting Aerodynamic Drag Coefficient at Zero-yaw for an Artillery Projectile [Volume 18, Issue 3, 2025, Pages 585-600]
  • Karimian Aliabadi, S. Numerical Study of the Effect of Corona Discharge on Upward Wake Flow in the Horizontal Axis Wind Turbine Farm [Volume 18, Issue 1, 2025, Pages 32-44]
  • Karn, A. Multiphase Flow Simulations to Explore Novel Technique of Air Injection to Mitigate Silt Erosion in Hydro Turbines [Volume 18, Issue 2, 2025, Pages 468-484]
  • Karthik Vel, E. Influence of Flow-induced Vibration of a D-VAWT With and Without Leading-edge Rod at Various Pitch Angles [Volume 18, Issue 7, 2025, Pages 1893-1905]
  • Kassem, F. A. Study of Effect of Convergence Section Geometric on the Performance of a Sonic Nozzle [Volume 18, Issue 7, 2025, Pages 1669-1682]
  • Kaushik, M. Experimental Investigation on the Effect of Ring Tab on Mixing Enhancement of Subsonic Jets [Volume 18, Issue 7, 2025, Pages 1707-1719]
  • Kavimani, V. Studies on the Effect of Baffle Plates in Settling Chamber Performance by CFD and Experimental Analysis [Volume 18, Issue 3, 2025, Pages 567-584]
  • Kbab, H. Analysis of Dual Bell Nozzle Configurations: Design Parameters and Performance Measurements [Volume 18, Issue 7, 2025, Pages 1767-1781]
  • Khelil, A. Experimental Study of the Influence of a Blowing Grid on Turbulent Jets Applied to Air Conditioning Systems [Volume 18, Issue 8, 2025, Pages 2043-2052]
  • Khelil, M. Experimental Study of the Influence of a Blowing Grid on Turbulent Jets Applied to Air Conditioning Systems [Volume 18, Issue 8, 2025, Pages 2043-2052]
  • Kibar, A. Investigation of a Vacuum Ejector Used in a Dynamic Function Vehicle Tire Air Control Valve [Volume 18, Issue 9, 2025, Pages 2361-2376]
  • Kim, H. D. 3-D Numerical Study of Cavitation Evolution Through A Butterfly Valve Model at Different Regulating Conditions [Volume 18, Issue 2, 2025, Pages 332-347]
  • Kim, H. H. Back-turn Approach for Optimal Operation of Booster Pump Systems [Volume 18, Issue 9, 2025, Pages 2202-2211]
  • Kim, S. W. High-efficiency Axial Flow Fan Design by Combining Through-flow Modeling, Optimization Algorithm and Computational Fluid Dynamics Simulation [Volume 18, Issue 8, 2025, Pages 1953-1963]
  • Koca, F. Optimal Design and Analysis of the Cooled Turbine Blade in Gas Turbines with CFD [Volume 18, Issue 1, 2025, Pages 60-72]
  • Kong, Z. Numerical Study on Aerodynamic Characteristics of H-Darrieus Wind Turbine with Blunt Trailing-edge Airfoil [Volume 18, Issue 4, 2025, Pages 976-991]
  • Korkmaz, Y. S. Investigation of a Vacuum Ejector Used in a Dynamic Function Vehicle Tire Air Control Valve [Volume 18, Issue 9, 2025, Pages 2361-2376]
  • Koroso, A. W. Pressure Drop Due to Cyclone Separator in Positive Dilute Phase Pneumatic Teff Grain Conveyor [Volume 18, Issue 2, 2025, Pages 317-331]
  • Kouah, S. Intelligent Prediction of Separated Flow Dynamics using Machine Learning [Volume 18, Issue 2, 2025, Pages 399-418]
  • Kouhikamali, R. A Simulation of Bubbly Flow Regime in Boiling Process by Comparing the Numerical Models of VOF and RPI Boiling [Volume 18, Issue 5, 2025, Pages 1140-1157]
  • Kowsary, F. Multi-objective Optimization of Staggered Tube Banks in Cross-flow Using Machine Learning and Genetic Algorithm [Volume 18, Issue 9, 2025, Pages 2163-2179]
  • Krishnaraj, R. Studies on the Effect of Baffle Plates in Settling Chamber Performance by CFD and Experimental Analysis [Volume 18, Issue 3, 2025, Pages 567-584]
  • Kucuk, U. C. Evaluating Diverse Meta-modeling Approaches for Predicting Performance Characteristics of a Twin Air Intake Based on Experimental Data [Volume 18, Issue 6, 2025, Pages 1364-1380]
  • Kucukoglu, O. Evaluating Diverse Meta-modeling Approaches for Predicting Performance Characteristics of a Twin Air Intake Based on Experimental Data [Volume 18, Issue 6, 2025, Pages 1364-1380]
  • Kulkarni, V. Experimental Investigations of Self-adjusting Bionic Flaps on Low-aspect Ratio Wings [Volume 18, Issue 4, 2025, Pages 992-1006]
  • Kumar, P. Effect of Height on the Supersonic Flow over a Blunt Vertical Fin [Volume 18, Issue 2, 2025, Pages 389-398]
  • Kumar, P. Computational Fluid Dynamics Study on the Aerodynamics of a Blended Wing Body with Ground Effect in Subsonic Conditions [Volume 18, Issue 9, 2025, Pages 2332-2348]
  • Kuscu, Y. F. Evaluating Diverse Meta-modeling Approaches for Predicting Performance Characteristics of a Twin Air Intake Based on Experimental Data [Volume 18, Issue 6, 2025, Pages 1364-1380]

L

  • Laâzab, S. Numerical Simulations of the Effect on Aerodynamic Performances of the Inter-propeller Distance in a Contra-rotating Propeller [Volume 18, Issue 4, 2025, Pages 947-959]
  • Lai, Z. Spatiotemporal Cooperative Effect Between the Time-asymmetric Ratio of Oscillating Trailing Edge Flap and Pivot Location on the Aerodynamics of a Pitching Airfoil [Volume 18, Issue 7, 2025, Pages 1782-1795]
  • Lakehal, A. Numerical Study of the Compressible Air Flow Through a Two-output Fluidic Oscillator [Volume 18, Issue 4, 2025, Pages 880-891]
  • Lakshmanan, D. Computational Investigation of Fluidic Thrust Vectoring Control in Modified Vikas Nozzle [Volume 18, Issue 3, 2025, Pages 678-697]
  • Lan, Q. Study on Staged Start-up Mitigation Strategies for Water Hammer in Large-scale Centrifugal Pump Systems Based on One-dimensional and Three-dimensional Coupled Simulation [Volume 18, Issue 7, 2025, Pages 1906-1922]
  • Laouar, R. Aerodynamic Optimization of 3D Micro HAWT Blade via RSM [Volume 18, Issue 2, 2025, Pages 504-517]
  • Le, T. H. Numerical Study on the Motion and Wave Loads of an Uncrewed Surface Vehicle Catamaran at Low Speed in Sea Waves [Volume 18, Issue 9, 2025, Pages 2321-2331]
  • Lee, C. High-efficiency Axial Flow Fan Design by Combining Through-flow Modeling, Optimization Algorithm and Computational Fluid Dynamics Simulation [Volume 18, Issue 8, 2025, Pages 1953-1963]
  • Li, B. Numerical Investigation of the Aerodynamic and Aeroacoustic Characteristics of a Double-suction Centrifugal Fan under Different Operating Conditions [Volume 18, Issue 6, 2025, Pages 1412-1429]
  • Li, G. C. Effect of Baffle Structure for the Particle Deposition Characteristics of in the Novel Cavity Upstream of the Pre-swirl Nozzles [Volume 18, Issue 9, 2025, Pages 2309-2320]
  • Li, H. Assessing Energy Loss and Entropy Production in a Centrifugal Pump with Various Impeller Blade Trailing Edges [Volume 18, Issue 2, 2025, Pages 518-534]
  • Li, H. Comprehensive Research on the Effects of Different Launch Conditions on Pump-jet Propulsor Performance [Volume 18, Issue 4, 2025, Pages 960-975]
  • Li, J. Numerical Analysis of the Inlet and Outlet Diameter Effects on Pulsation Dynamics and Cavitation in the Lobe Pump [Volume 18, Issue 5, 2025, Pages 1189-1204]
  • Li, J. Multi-objective Optimization of Combined Internal Components with a Vortex Stabilizer and Apex Cone for Performance Improvement of Cyclone Separator [Volume 18, Issue 8, 2025, Pages 2066-2084]
  • Li, K. Extraction for the Evolution Features of Cavitation Cloud Induced by the Self-excited Oscillating Jet [Volume 18, Issue 9, 2025, Pages 2377-2388]
  • Li, M. Z. Research on the Aerodynamic Characteristics of an Ultrahigh-speed Elevator During the Staggering Process Between the Car and Counterweight [Volume 18, Issue 5, 2025, Pages 1158-1173]
  • Li, N. Numerical Study on Static Airtightness of Subway Vehicles with Multiple Leak Holes [Volume 18, Issue 2, 2025, Pages 348-362]
  • Li, Q. Analysis of Sealing Performance and Mechanism of Biomimetic Superoleophobic Surface Structure [Volume 18, Issue 7, 2025, Pages 1938-1952]
  • Li, Q. Flow Characteristics of Bulb Tubular Turbine Based on Solid-liquid Two-phase Flow Model [Volume 18, Issue 8, 2025, Pages 2137-2148]
  • Li, R. Dynamic Characteristics of Near-wall Single Bubble Collapse-induced Shock Waves [Volume 18, Issue 3, 2025, Pages 617-630]
  • Li, R. Research on the Influence of Jet Control Point Distribution on Gas‒liquid Separation Characteristics in a Helical Axial-flow Multiphase Pump [Volume 18, Issue 5, 2025, Pages 1285-1300]
  • Li, R. Research on the Non-uniform Flow Characteristics in a Screw Mixed-flow Deep-sea Mining Pump [Volume 18, Issue 7, 2025, Pages 1861-1872]
  • Li, S. A Rapid Design Method for Centrifugal Pump Impellers Based on Machine Learning [Volume 18, Issue 7, 2025, Pages 1735-1749]
  • Li, S. Optimization of Structural Parameters and Cavitation Suppression in Control Valves Based on P-WOA [Volume 18, Issue 8, 2025, Pages 2095-2107]
  • Li, T. Numerical Study on Static Airtightness of Subway Vehicles with Multiple Leak Holes [Volume 18, Issue 2, 2025, Pages 348-362]
  • Li, W. Dynamic Characteristics of Near-wall Single Bubble Collapse-induced Shock Waves [Volume 18, Issue 3, 2025, Pages 617-630]
  • Li, W. A Rapid Design Method for Centrifugal Pump Impellers Based on Machine Learning [Volume 18, Issue 7, 2025, Pages 1735-1749]
  • Li, W. Optimization of Structural Parameters and Cavitation Suppression in Control Valves Based on P-WOA [Volume 18, Issue 8, 2025, Pages 2095-2107]
  • Li, X. Numerical Investigation of the Impact of Intake Pipelines on the Performance and Flow Characteristics of a Centrifugal Compressor [Volume 18, Issue 6, 2025, Pages 1483-1501]
  • Li, X. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Li, X. Research on the Three-dimensional Transient Characteristics of the Hydraulic System during Load Rejection with Combined Regulation of Ball Valve and Guide Vanes in the Entire Hydraulic Passage of the Pumped Storage Power Stations [Volume 18, Issue 9, 2025, Pages 2180-2201]
  • Li, X. J. Unsteady Flow Mechanisms of the Stability Improvement for an Optimized Compressor [Volume 18, Issue 4, 2025, Pages 919-932]
  • Li, Y. Effects of Different Attack Angles and Guide Vane Numbers on the Vortex-solid Interaction Noise of Axial Flow Fan [Volume 18, Issue 1, 2025, Pages 290-303]
  • Li, Y. Characteristics of an Internal Dielectric Barrier Discharge Plasma-induced Blowing Device [Volume 18, Issue 4, 2025, Pages 1023-1034]
  • Li, Y. Numerical Analysis of Droplet Impact on Liquid Film with Different Surface Structures [Volume 18, Issue 6, 2025, Pages 1512-1523]
  • Li, Z. P. Contribution of Suspension Bogies’ Aerodynamic Loads to the Dynamic Characteristics of a High-temperature Superconducting Maglev Train Running under Crosswind [Volume 18, Issue 6, 2025, Pages 1617-1638]
  • Liao, G. Passive Drag Reduction Optimization for Complex Commercial Vehicle Models [Volume 18, Issue 6, 2025, Pages 1639-1651]
  • Likitchatchawankun, A. CFD Simulation and Robust Design Optimization of the Valve Seat and Orifice Plate in Port Fuel Injector [Volume 18, Issue 7, 2025, Pages 1750-1766]
  • Lin, C. S. Simulation of the Separation of Homogeneous Whole Blood in a Spin-up Rotating Cylindrical Container [Volume 18, Issue 1, 2025, Pages 73-86]
  • Lin, Z. 3-D Numerical Study of Cavitation Evolution Through A Butterfly Valve Model at Different Regulating Conditions [Volume 18, Issue 2, 2025, Pages 332-347]
  • Lin, Z. Investigation of Geometric Characteristics on the Lubricant Performance of Thrust Bearing with Cavitation [Volume 18, Issue 7, 2025, Pages 1833-1842]
  • Liu, B. Behavior of a Glycerol Aqueous Droplet Impacting a Thin Water Film [Volume 18, Issue 3, 2025, Pages 798-808]
  • Liu, B. Research on the Aerodynamic Characteristics of an Ultrahigh-speed Elevator During the Staggering Process Between the Car and Counterweight [Volume 18, Issue 5, 2025, Pages 1158-1173]
  • Liu, G. Extraction for the Evolution Features of Cavitation Cloud Induced by the Self-excited Oscillating Jet [Volume 18, Issue 9, 2025, Pages 2377-2388]
  • Liu, J. Large Eddy Simulation of Swirl Topology Evolution in Strong Oxidant Jet Milling Force Field [Volume 18, Issue 2, 2025, Pages 374-388]
  • Liu, K. Numerical Study of the Aerodynamic Effect of Ski Suit Surface Roughness on Ski Jumping Athletes During the Flight Phase [Volume 18, Issue 3, 2025, Pages 710-727]
  • Liu, L. Multi-objective Optimization of Combined Internal Components with a Vortex Stabilizer and Apex Cone for Performance Improvement of Cyclone Separator [Volume 18, Issue 8, 2025, Pages 2066-2084]
  • Liu, M. Numerical Analysis of Droplet Impact on Liquid Film with Different Surface Structures [Volume 18, Issue 6, 2025, Pages 1512-1523]
  • Liu, M. M. Research on the Aerodynamic Characteristics of an Ultrahigh-speed Elevator During the Staggering Process Between the Car and Counterweight [Volume 18, Issue 5, 2025, Pages 1158-1173]
  • Liu, P. F. Contribution of Suspension Bogies’ Aerodynamic Loads to the Dynamic Characteristics of a High-temperature Superconducting Maglev Train Running under Crosswind [Volume 18, Issue 6, 2025, Pages 1617-1638]
  • Liu, P. Q. Numerical Modal Analysis of the Correlation Between Spanwise Vortex Shedding and Far-field Aeolian Noise for Square and Circular Wall-mounted Cylinders [Volume 18, Issue 2, 2025, Pages 450-467]
  • Liu, Q. Numerical Study of the Aerodynamic Effect of Ski Suit Surface Roughness on Ski Jumping Athletes During the Flight Phase [Volume 18, Issue 3, 2025, Pages 710-727]
  • Liu, Q. Research on the Three-dimensional Transient Characteristics of the Hydraulic System during Load Rejection with Combined Regulation of Ball Valve and Guide Vanes in the Entire Hydraulic Passage of the Pumped Storage Power Stations [Volume 18, Issue 9, 2025, Pages 2180-2201]
  • Liu, R. Investigation of the Influence of Different Flapping Wing Motion Characteristics on Aerodynamic Parameters under Incoming Flow [Volume 18, Issue 6, 2025, Pages 1596-1616]
  • Liu, R. Effect of an Axially Offset Impeller on the Transient Physics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 7, 2025, Pages 1873-1892]
  • Liu, X. Design and Application of a Test Rig for Stationary Component Performance Measurement of Centrifugal Compressors [Volume 18, Issue 4, 2025, Pages 1115-1129]
  • Liu, X. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Liu, Y. Flow-induced Flutter Derivatives of Bridge Decks [Volume 18, Issue 4, 2025, Pages 835-849]
  • Liu, Y. Design and Application of a Test Rig for Stationary Component Performance Measurement of Centrifugal Compressors [Volume 18, Issue 4, 2025, Pages 1115-1129]
  • Liu, Y. Experimental Investigation of Fuel Film Characteristics after Spray Impacting on Ultra-cold Surface [Volume 18, Issue 6, 2025, Pages 1550-1562]
  • Liu, Y; Research on the Effect of Small Blade Arrangement on the Cavitation Performance of Centrifugal Pumps [Volume 18, Issue 6, 2025, Pages 1563-1575]
  • Liu, Z. Effect Mechanism of Splitter Blade Length on the Energy Performance of Centrifugal Pump [Volume 18, Issue 8, 2025, Pages 2108-2121]
  • Liu, Z. X. Unsteady Flow Mechanisms of the Stability Improvement for an Optimized Compressor [Volume 18, Issue 4, 2025, Pages 919-932]
  • Lodhi, M. S. Experimental Investigation of Active Microfluidic Cooling Solution to Processor Chip [Volume 18, Issue 1, 2025, Pages 145-158]
  • Lohani, B. Aerodynamic Drag Analysis of Superpressure and Zero Pressure Balloons using Large Eddy Simulations (LES) [Volume 18, Issue 5, 2025, Pages 1130-1139]
  • Long, H. A Novel Pressure Drop Model for Seabed Airlift Devices Considering the Particle Sinking Effect [Volume 18, Issue 9, 2025, Pages 2252-2267]
  • Long, Y. A Rapid Design Method for Centrifugal Pump Impellers Based on Machine Learning [Volume 18, Issue 7, 2025, Pages 1735-1749]
  • Lou, Y. Numerical Analysis of Droplet Impact on Liquid Film with Different Surface Structures [Volume 18, Issue 6, 2025, Pages 1512-1523]
  • Lu, J. Optimized Reduction in Draft Tube Pressure Pulsation for a Francis Turbine [Volume 18, Issue 1, 2025, Pages 222-240]
  • Lu, T. Behavior of a Glycerol Aqueous Droplet Impacting a Thin Water Film [Volume 18, Issue 3, 2025, Pages 798-808]
  • Luo, D. Numerical Study on the Drag Reduction for a D-Shaped Bluff Body with Wavy Trailing Edge Structures [Volume 18, Issue 3, 2025, Pages 661-677]
  • Luo, G. Experiment and Numerical Simulation of Aerodynamic Performance of Compressor with Damaged Blades [Volume 18, Issue 5, 2025, Pages 1312-1334]
  • Luo, Y. Analysis of the Influence of Nozzle Structure and Hydraulic Parameters on the Cutting Efficiency of High-pressure Abrasive Water Jet (AWJ) [Volume 18, Issue 5, 2025, Pages 1246-1265]
  • Luo, Y. A Rapid Design Method for Centrifugal Pump Impellers Based on Machine Learning [Volume 18, Issue 7, 2025, Pages 1735-1749]
  • Luo, Z. Analysis of the Influence of Nozzle Structure and Hydraulic Parameters on the Cutting Efficiency of High-pressure Abrasive Water Jet (AWJ) [Volume 18, Issue 5, 2025, Pages 1246-1265]
  • Luo, Z. Research on Axisymmetric Vectoring Exhaust Nozzle Dynamic Characteristics Considering Aerodynamic and Thermal Loads Effect [Volume 18, Issue 6, 2025, Pages 1381-1395]

M

  • Ma, D. Research on the Non-uniform Flow Characteristics in a Screw Mixed-flow Deep-sea Mining Pump [Volume 18, Issue 7, 2025, Pages 1861-1872]
  • Ma, J. C. Research on the Aerodynamic Characteristics of an Ultrahigh-speed Elevator During the Staggering Process Between the Car and Counterweight [Volume 18, Issue 5, 2025, Pages 1158-1173]
  • Ma, Q. Numerical Study on the Interaction Characteristics between Attached Cavitation and Velocity Boundary Layer under Different Working Conditions [Volume 18, Issue 1, 2025, Pages 45-59]
  • Ma, Q. Effect Mechanism of Splitter Blade Length on the Energy Performance of Centrifugal Pump [Volume 18, Issue 8, 2025, Pages 2108-2121]
  • Ma, T. Passive Drag Reduction Optimization for Complex Commercial Vehicle Models [Volume 18, Issue 6, 2025, Pages 1639-1651]
  • Ma, Y. Numerical Study of the Effect of Rail Modelling Method on Train Aerodynamic Performance and Slipstream [Volume 18, Issue 1, 2025, Pages 260-273]
  • Ma, Y. Rapid Prediction of Ice Accretion on Swept Wings Based on Proper Orthogonal Decomposition and Surrogate Modelling [Volume 18, Issue 8, 2025, Pages 2026-2042]
  • Maheshwaran, C. B. Influence of Flow-induced Vibration of a D-VAWT With and Without Leading-edge Rod at Various Pitch Angles [Volume 18, Issue 7, 2025, Pages 1893-1905]
  • Maiga, A. M. Experimental Study of the Influence of a Blowing Grid on Turbulent Jets Applied to Air Conditioning Systems [Volume 18, Issue 8, 2025, Pages 2043-2052]
  • Malek Jafarian, S. A Design and Optimization of Multi-slot Diffusers for Power Augmentation in Small Axial Flow Wind Turbines [Volume 18, Issue 6, 2025, Pages 1576-1595]
  • Mansour, A. MHD Free Convection in an Enclosure Loaded with Nanofluid and Partially Cross-heated [Volume 18, Issue 7, 2025, Pages 1720-1734]
  • Mao, H. B. Study on the Shock Wave Characteristics of Spherical and Cylindrical Explosives in Near-field Underwater Explosion [Volume 18, Issue 4, 2025, Pages 892-903]
  • Marfouk, A. MHD Free Convection in an Enclosure Loaded with Nanofluid and Partially Cross-heated [Volume 18, Issue 7, 2025, Pages 1720-1734]
  • Marzban, F. Thermal Behavior of Carboxymethyl Cellulose Containing Alumina Nanoparticles at the Entrance Region of an Annulus [Volume 18, Issue 3, 2025, Pages 641-660]
  • Marzban, M. Thermal Behavior of Carboxymethyl Cellulose Containing Alumina Nanoparticles at the Entrance Region of an Annulus [Volume 18, Issue 3, 2025, Pages 641-660]
  • Mascarenhas, C. Aerodynamic Drag Analysis of Superpressure and Zero Pressure Balloons using Large Eddy Simulations (LES) [Volume 18, Issue 5, 2025, Pages 1130-1139]
  • Mdouki, R. Aerodynamic Optimization of 3D Micro HAWT Blade via RSM [Volume 18, Issue 2, 2025, Pages 504-517]
  • Medelfef, A. Numerical Study of the Compressible Air Flow Through a Two-output Fluidic Oscillator [Volume 18, Issue 4, 2025, Pages 880-891]
  • Mehta, A. U. Computationally Investigate Low Velocity Hydrokinetic Turbines with Variant Systems [Volume 18, Issue 3, 2025, Pages 769-786]
  • Mehta, H. B. Effect of Microchannel Depth on Subcooled Flow Boiling Instability and Heat Transfer [Volume 18, Issue 3, 2025, Pages 698-709]
  • Meng, H. Numerical Study on Static Airtightness of Subway Vehicles with Multiple Leak Holes [Volume 18, Issue 2, 2025, Pages 348-362]
  • Meng, L. Numerical Analysis of the Inlet and Outlet Diameter Effects on Pulsation Dynamics and Cavitation in the Lobe Pump [Volume 18, Issue 5, 2025, Pages 1189-1204]
  • Mihailovich, P. I. Effect of Receiver Holes on Flow and Heat Transfer Characteristics in A Radial Pre-swirl System: A LES Study [Volume 18, Issue 3, 2025, Pages 535-548]
  • Mirbozorgi, S. A Design and Optimization of Multi-slot Diffusers for Power Augmentation in Small Axial Flow Wind Turbines [Volume 18, Issue 6, 2025, Pages 1576-1595]
  • Mirsajedi, S. M. Three-dimensional Simulation of Wet Combustion of Hydrogen-methane Mixture in the Annular Combustion Chamber of a Microturbine [Volume 18, Issue 6, 2025, Pages 1396-1411]
  • Mirzaei, M. A Simulation of Bubbly Flow Regime in Boiling Process by Comparing the Numerical Models of VOF and RPI Boiling [Volume 18, Issue 5, 2025, Pages 1140-1157]
  • Mishra, R. CFD Analysis of Straightener Designs on Overall Performance of the Axial Flow Blood Pump [Volume 18, Issue 2, 2025, Pages 304-316]
  • Misra, R. D. Study of Stage Gap for a 2-bladed 2-stage Savonius-like-hydro-kinetic Turbine Performance Involving End Plates and Overlapping [Volume 18, Issue 4, 2025, Pages 904-918]
  • Moghtaderi, B. Numerical Study of the Passive Motion of Airfoils in Porous Media [Volume 18, Issue 8, 2025, Pages 2149-2162]
  • Mohammadzadeh, K. Thermal Behavior of Carboxymethyl Cellulose Containing Alumina Nanoparticles at the Entrance Region of an Annulus [Volume 18, Issue 3, 2025, Pages 641-660]
  • Mohan, S. Computational Fluid Dynamics Study on the Aerodynamics of a Blended Wing Body with Ground Effect in Subsonic Conditions [Volume 18, Issue 9, 2025, Pages 2332-2348]
  • Mohsin, M. Numerical Simulation of Hydrodynamic Forces on an Underwater Vehicle Near the Free Surface [Volume 18, Issue 9, 2025, Pages 2239-2251]
  • Mondal, P. Numerical Investigation of Impinging Planar Shock Wave Interaction with Axisymmetric Slender Body [Volume 18, Issue 3, 2025, Pages 809-820]
  • Moshfeghi, M. Numerical Study of the Effect of Corona Discharge on Upward Wake Flow in the Horizontal Axis Wind Turbine Farm [Volume 18, Issue 1, 2025, Pages 32-44]
  • Mou, C. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]
  • Mou, J. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]
  • Moulai, H. Numerical Simulations of the Effect on Aerodynamic Performances of the Inter-propeller Distance in a Contra-rotating Propeller [Volume 18, Issue 4, 2025, Pages 947-959]
  • Moussavi, S. A. Improving Wind Turbine Power with Boundary Layer Suction [Volume 18, Issue 2, 2025, Pages 363-373]
  • Muhammad Yazid, M. N. A. W. Numerical Simulation of Hydrodynamic Forces on an Underwater Vehicle Near the Free Surface [Volume 18, Issue 9, 2025, Pages 2239-2251]

N

  • Nadaraja Pillai, S. Influence of Flow-induced Vibration of a D-VAWT With and Without Leading-edge Rod at Various Pitch Angles [Volume 18, Issue 7, 2025, Pages 1893-1905]
  • Naghavi Moghaddam, A. A Design and Optimization of Multi-slot Diffusers for Power Augmentation in Small Axial Flow Wind Turbines [Volume 18, Issue 6, 2025, Pages 1576-1595]
  • Nasiri, D. Numerical Simulation of Coupled CFD-flight Mechanics and Taguchi’s Approach for Reliability and Safety Assessments in the Hot Stage Separation of a Launch Vehicle [Volume 18, Issue 8, 2025, Pages 2085-2094]
  • Nasseroleslami, A. Piezoelectric Sensors Placement Strategy for Accurate Acoustic Data Evaluation in Cavitation-induced Erosion Processes [Volume 18, Issue 3, 2025, Pages 601-616]
  • Nath, B. Study of Stage Gap for a 2-bladed 2-stage Savonius-like-hydro-kinetic Turbine Performance Involving End Plates and Overlapping [Volume 18, Issue 4, 2025, Pages 904-918]
  • Nguyen, T. T. Numerical Study on the Motion and Wave Loads of an Uncrewed Surface Vehicle Catamaran at Low Speed in Sea Waves [Volume 18, Issue 9, 2025, Pages 2321-2331]
  • Ning, G. Effect of Pressure Equalization Groove Structure on Static Characteristics of Aerostatic Bearings [Volume 18, Issue 4, 2025, Pages 1086-1097]

O

  • Olivares-Ramírez, J. M. Numerical Analysis Used to Predict the Spread of COVID-19 in a Classroom: TecNM Campus Sur de Guanajuato Case Study [Volume 18, Issue 7, 2025, Pages 1695-1706]
  • Ortega-Alejos, J. Numerical Analysis Used to Predict the Spread of COVID-19 in a Classroom: TecNM Campus Sur de Guanajuato Case Study [Volume 18, Issue 7, 2025, Pages 1695-1706]
  • Ozalp, C. Experimental and Numerical Study of Flow over Rectangular Cavity [Volume 18, Issue 9, 2025, Pages 2297-2308]
  • Ozdemır, O. V. Evaluating Diverse Meta-modeling Approaches for Predicting Performance Characteristics of a Twin Air Intake Based on Experimental Data [Volume 18, Issue 6, 2025, Pages 1364-1380]

P

  • Pan, H. J. Multi-objective Optimization of Combined Internal Components with a Vortex Stabilizer and Apex Cone for Performance Improvement of Cyclone Separator [Volume 18, Issue 8, 2025, Pages 2066-2084]
  • Pan, Y. M. Contribution of Suspension Bogies’ Aerodynamic Loads to the Dynamic Characteristics of a High-temperature Superconducting Maglev Train Running under Crosswind [Volume 18, Issue 6, 2025, Pages 1617-1638]
  • Pang, C. Research on Axisymmetric Vectoring Exhaust Nozzle Dynamic Characteristics Considering Aerodynamic and Thermal Loads Effect [Volume 18, Issue 6, 2025, Pages 1381-1395]
  • Pang, R. Design and Flow Field Analysis of Extendable Leaching-optimized Cavern Construction Device for Salt Cavern Gas Storage [Volume 18, Issue 9, 2025, Pages 2349-2360]
  • Parhizkar, H. Numerical Simulation of Coupled CFD-flight Mechanics and Taguchi’s Approach for Reliability and Safety Assessments in the Hot Stage Separation of a Launch Vehicle [Volume 18, Issue 8, 2025, Pages 2085-2094]
  • Parthasarathy, V. Numerical Investigation of Swirl Recovery from a Transonic Propeller with Swirl Recovery Vanes [Volume 18, Issue 6, 2025, Pages 1534-1549]
  • Pasandideh Fard, M. Longitudinal Sloshing Behaviors of Horizontal Cylindrical Liquid Tanks Subjected to Harmonic and Seismic Excitations [Volume 18, Issue 1, 2025, Pages 241-259]
  • Patel, V. K Computationally Investigate Low Velocity Hydrokinetic Turbines with Variant Systems [Volume 18, Issue 3, 2025, Pages 769-786]
  • Patel, V. Impact of Compression Ratio on Combustion Characteristics of VCR-CRDI Type Diesel Engine Fueled with Moringa Oleifera Methyl Ester [Volume 18, Issue 3, 2025, Pages 787-797]
  • Pazooki, F. A New Aspect of the Ground Effect: The Two-way Interactions between an Airplane Flying in the Vicinity of Sea Water and the Free Surface Waves [Volume 18, Issue 9, 2025, Pages 2268-2281]
  • Phan, T. L. Numerical Study on the Motion and Wave Loads of an Uncrewed Surface Vehicle Catamaran at Low Speed in Sea Waves [Volume 18, Issue 9, 2025, Pages 2321-2331]
  • Pinarbasi, A. Experimental and Numerical Study of Flow over Rectangular Cavity [Volume 18, Issue 9, 2025, Pages 2297-2308]
  • Prajapati, A. Effect of Microchannel Depth on Subcooled Flow Boiling Instability and Heat Transfer [Volume 18, Issue 3, 2025, Pages 698-709]
  • Prasath, M. S. Numerical Studies on Aerodynamics Performance of Modified Basebleed to Reduce Fuel Consumption in Squareback Cars [Volume 18, Issue 1, 2025, Pages 205-221]

Q

  • Qi, L. Investigation of the Flow Field Characteristics of Aortic Bileaflet Mechanical Heart Valves with Different Leaflet Shapes Using PIV [Volume 18, Issue 4, 2025, Pages 1048-1063]
  • Qi, L. Spatiotemporal Cooperative Effect Between the Time-asymmetric Ratio of Oscillating Trailing Edge Flap and Pivot Location on the Aerodynamics of a Pitching Airfoil [Volume 18, Issue 7, 2025, Pages 1782-1795]
  • Qian, H. Numerical Analysis of the Inlet and Outlet Diameter Effects on Pulsation Dynamics and Cavitation in the Lobe Pump [Volume 18, Issue 5, 2025, Pages 1189-1204]
  • Qiang, P. Research on the Influence of Jet Control Point Distribution on Gas‒liquid Separation Characteristics in a Helical Axial-flow Multiphase Pump [Volume 18, Issue 5, 2025, Pages 1285-1300]
  • Qiang, Y. Investigation of the Flow Field Characteristics of Aortic Bileaflet Mechanical Heart Valves with Different Leaflet Shapes Using PIV [Volume 18, Issue 4, 2025, Pages 1048-1063]
  • Qiao, Y. Investigation of Compressor Surge Process and Flow Field Details Using Numerical Simulation [Volume 18, Issue 3, 2025, Pages 756-768]
  • Qin, H. R. Multi-objective Optimization of Combined Internal Components with a Vortex Stabilizer and Apex Cone for Performance Improvement of Cyclone Separator [Volume 18, Issue 8, 2025, Pages 2066-2084]
  • Qin, Y. Large Eddy Simulation of Swirl Topology Evolution in Strong Oxidant Jet Milling Force Field [Volume 18, Issue 2, 2025, Pages 374-388]
  • Qiu, C. Effect of Receiver Holes on Flow and Heat Transfer Characteristics in A Radial Pre-swirl System: A LES Study [Volume 18, Issue 3, 2025, Pages 535-548]
  • Qiu, N. Effect of the Circumferential Position of Balance Holes on the Cavitation Performance and Cavitation Erosion of Centrifugal Pump [Volume 18, Issue 1, 2025, Pages 131-144]
  • Qu, S. Numerical Analysis of Hydrokinetic Energy Harvesting from Flow-induced Vibration of a Cylinder with a Single Protrusion [Volume 18, Issue 7, 2025, Pages 1796-1808]

R

  • Raj, K. Hydrodynamic and Thermodynamic Behavior of Liquid Methane in a Vertical Feed Pipe [Volume 18, Issue 5, 2025, Pages 1266-1284]
  • Raj, P. R. L. Hydrodynamic and Thermodynamic Behavior of Liquid Methane in a Vertical Feed Pipe [Volume 18, Issue 5, 2025, Pages 1266-1284]
  • Rajpara, P. Integration of RCCI and CDF Combustion in Conventional Diesel Engine Using CNG-diesel Fuels: An Experimental Study [Volume 18, Issue 1, 2025, Pages 87-97]
  • Ranjan Manjul, R. Effect of Triangular Lip Wall on the Performance of a Stationary Oscillating Water Column Device at Various Wave Conditions Using Reynolds-averaged Navier-Stokes (RANS) Model [Volume 18, Issue 8, 2025, Pages 2011-2025]
  • Raviselvam, S. Numerical Investigation of Swirl Recovery from a Transonic Propeller with Swirl Recovery Vanes [Volume 18, Issue 6, 2025, Pages 1534-1549]
  • Rawat, D. S. Experimental Investigation of Active Microfluidic Cooling Solution to Processor Chip [Volume 18, Issue 1, 2025, Pages 145-158]
  • Ren, Q. Research on the Three-dimensional Transient Characteristics of the Hydraulic System during Load Rejection with Combined Regulation of Ball Valve and Guide Vanes in the Entire Hydraulic Passage of the Pumped Storage Power Stations [Volume 18, Issue 9, 2025, Pages 2180-2201]
  • Rezoug, T. Numerical Investigation of the Impact of a Hollow Ceramic Droplet on Metallic Substrate [Volume 18, Issue 9, 2025, Pages 2212-2225]
  • Roudane, M. Intelligent Prediction of Separated Flow Dynamics using Machine Learning [Volume 18, Issue 2, 2025, Pages 399-418]

S

  • Sadeghfam, S. On the Multiple Steady Flow States in Spindle Shaped Geometry of Bridge Foundations [Volume 18, Issue 1, 2025, Pages 1-15]
  • Sadi, S. Improving Wind Turbine Power with Boundary Layer Suction [Volume 18, Issue 2, 2025, Pages 363-373]
  • Sahamifar, S. Multi-objective Optimization of Staggered Tube Banks in Cross-flow Using Machine Learning and Genetic Algorithm [Volume 18, Issue 9, 2025, Pages 2163-2179]
  • Sahoo, D. Effect of Height on the Supersonic Flow over a Blunt Vertical Fin [Volume 18, Issue 2, 2025, Pages 389-398]
  • Samadi, F. Multi-objective Optimization of Staggered Tube Banks in Cross-flow Using Machine Learning and Genetic Algorithm [Volume 18, Issue 9, 2025, Pages 2163-2179]
  • Sargolzaie, M. Experimental Dynamic Stability Investigation on Orion Entry Capsule in Supersonic Flow [Volume 18, Issue 5, 2025, Pages 1301-1311]
  • Sari, S. Airwake Characteristics of NATO-Generic Destroyer: A Numerical Study [Volume 18, Issue 1, 2025, Pages 112-130]
  • Sarma, K. C. Study of Stage Gap for a 2-bladed 2-stage Savonius-like-hydro-kinetic Turbine Performance Involving End Plates and Overlapping [Volume 18, Issue 4, 2025, Pages 904-918]
  • Sarreshtehdari, A. Piezoelectric Sensors Placement Strategy for Accurate Acoustic Data Evaluation in Cavitation-induced Erosion Processes [Volume 18, Issue 3, 2025, Pages 601-616]
  • Sasikumar, C. Numerical Studies on Aerodynamics Performance of Modified Basebleed to Reduce Fuel Consumption in Squareback Cars [Volume 18, Issue 1, 2025, Pages 205-221]
  • Sathish Kumar, K. Investigation of Sonic Under-expanded Jets Using Slotted Rectangular Mechanical Tabs [Volume 18, Issue 3, 2025, Pages 631-640]
  • Satish, D. Effect of Disk Friction Loss Reduction on Flow Phenomena in Low-specific Speed Centrifugal Pump: An Experimental and Numerical Approach [Volume 18, Issue 6, 2025, Pages 1430-1445]
  • Seif, M. S. Piezoelectric Sensors Placement Strategy for Accurate Acoustic Data Evaluation in Cavitation-induced Erosion Processes [Volume 18, Issue 3, 2025, Pages 601-616]
  • Senthil Kumar, C. Propeller Slipstream Effects on the Aerodynamics Characteristics of a Transition Micro Air Vehicle [Volume 18, Issue 3, 2025, Pages 742-755]
  • Shah, I. Numerical Simulation of Hydrodynamic Forces on an Underwater Vehicle Near the Free Surface [Volume 18, Issue 9, 2025, Pages 2239-2251]
  • Shah, N. Effect of Microchannel Depth on Subcooled Flow Boiling Instability and Heat Transfer [Volume 18, Issue 3, 2025, Pages 698-709]
  • Shaharuddin, N. M. R. Numerical Simulation of Hydrodynamic Forces on an Underwater Vehicle Near the Free Surface [Volume 18, Issue 9, 2025, Pages 2239-2251]
  • Shao, C. Numerical Simulation and Experimental Study on the Gas-liquid Two-phase Flow in the Pump During the Gas Cut-off Transition Process [Volume 18, Issue 8, 2025, Pages 1980-1992]
  • Shao, X. Study on the LES of Premixed Gas Flame Dynamics in a Weak Confinement Structure: The Influence of Continuous Obstacle Plates [Volume 18, Issue 4, 2025, Pages 864-879]
  • Shen, W. J. Effect of Coolant Inlet Mode on Heat Transfer Characteristics of a Twin-web Turbine Disc Cavity [Volume 18, Issue 4, 2025, Pages 933-946]
  • Shen, Z. Research on the Non-uniform Flow Characteristics in a Screw Mixed-flow Deep-sea Mining Pump [Volume 18, Issue 7, 2025, Pages 1861-1872]
  • Sheng, J. Behavior of a Glycerol Aqueous Droplet Impacting a Thin Water Film [Volume 18, Issue 3, 2025, Pages 798-808]
  • Sheorey, T. Experimental Investigation of Active Microfluidic Cooling Solution to Processor Chip [Volume 18, Issue 1, 2025, Pages 145-158]
  • Shi, C. Analysis of the Influence of Nozzle Structure and Hydraulic Parameters on the Cutting Efficiency of High-pressure Abrasive Water Jet (AWJ) [Volume 18, Issue 5, 2025, Pages 1246-1265]
  • Shi, H. Design and Application of a Test Rig for Stationary Component Performance Measurement of Centrifugal Compressors [Volume 18, Issue 4, 2025, Pages 1115-1129]
  • Shi, J. Numerical Study of the Effect of Rail Modelling Method on Train Aerodynamic Performance and Slipstream [Volume 18, Issue 1, 2025, Pages 260-273]
  • Shi, W. Assessing Energy Loss and Entropy Production in a Centrifugal Pump with Various Impeller Blade Trailing Edges [Volume 18, Issue 2, 2025, Pages 518-534]
  • Shi, W. Comprehensive Research on the Effects of Different Launch Conditions on Pump-jet Propulsor Performance [Volume 18, Issue 4, 2025, Pages 960-975]
  • Shi, Z. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Shinde, S. Experimental Investigations of Self-adjusting Bionic Flaps on Low-aspect Ratio Wings [Volume 18, Issue 4, 2025, Pages 992-1006]
  • Shu, Y. Effects of Inlet Tip Clearance on Internal Flow Characteristic and Aerodynamic Performance of Centrifugal Compressor [Volume 18, Issue 1, 2025, Pages 274-289]
  • Shukla, P. K. CFD Analysis of Straightener Designs on Overall Performance of the Axial Flow Blood Pump [Volume 18, Issue 2, 2025, Pages 304-316]
  • Singh, A. Modelling and Optimization of Fluid Frictional Torque in a Single Stage Centrifugal Pump with a Vaned Diffuser Based on RSM, ANN and Desirability Function [Volume 18, Issue 3, 2025, Pages 728-741]
  • Singh, A. K. Effect of Gate Opening Height on the Hydraulic Jump Characteristics in an Open Channel [Volume 18, Issue 6, 2025, Pages 1502-1511]
  • Singh, D. K. Modelling and Optimization of Fluid Frictional Torque in a Single Stage Centrifugal Pump with a Vaned Diffuser Based on RSM, ANN and Desirability Function [Volume 18, Issue 3, 2025, Pages 728-741]
  • Singh, K. Modelling and Optimization of Fluid Frictional Torque in a Single Stage Centrifugal Pump with a Vaned Diffuser Based on RSM, ANN and Desirability Function [Volume 18, Issue 3, 2025, Pages 728-741]
  • Sivaraj, G. Numerical Studies on Aerodynamics Performance of Modified Basebleed to Reduce Fuel Consumption in Squareback Cars [Volume 18, Issue 1, 2025, Pages 205-221]
  • Smaili, A. Impact of Surface Roughness on the Aerodynamic Efficiency of Wind Turbines: A New CFD-based Correlation [Volume 18, Issue 2, 2025, Pages 438-449]
  • Sobieski, W. Challenges in Simulating Pollutant Behavior in Watercourses with Diverse Ecological and Structural Features [Volume 18, Issue 8, 2025, Pages 1964-1979]
  • Sohrabi, A. Three-dimensional Simulation of Wet Combustion of Hydrogen-methane Mixture in the Annular Combustion Chamber of a Microturbine [Volume 18, Issue 6, 2025, Pages 1396-1411]
  • Soltani, M. R. Experimental Dynamic Stability Investigation on Orion Entry Capsule in Supersonic Flow [Volume 18, Issue 5, 2025, Pages 1301-1311]
  • Song, C. Effect of Receiver Holes on Flow and Heat Transfer Characteristics in A Radial Pre-swirl System: A LES Study [Volume 18, Issue 3, 2025, Pages 535-548]
  • Su, B. Flow-induced Flutter Derivatives of Bridge Decks [Volume 18, Issue 4, 2025, Pages 835-849]
  • Su, T. Numerical Study of Vertical Axis Wind Turbine with Spoiler Based on Orthogonal Experiments [Volume 18, Issue 1, 2025, Pages 159-170]
  • Su, T. Parameter Optimisation of a H-type Three-blade Contra-rotating Vertical-axis Wind Turbine at Low Tip-speed Ratio [Volume 18, Issue 6, 2025, Pages 1470-1482]
  • Su, T. Aeroelastic Analysis of a Wind Turbine with a Bamboo Honeycomb Structural Web [Volume 18, Issue 8, 2025, Pages 2122-2136]
  • Suleyman Yigit, K. Investigation of a Vacuum Ejector Used in a Dynamic Function Vehicle Tire Air Control Valve [Volume 18, Issue 9, 2025, Pages 2361-2376]
  • Sume, V. On the Multiple Steady Flow States in Spindle Shaped Geometry of Bridge Foundations [Volume 18, Issue 1, 2025, Pages 1-15]
  • Sun, H. Experiment and Numerical Simulation of Aerodynamic Performance of Compressor with Damaged Blades [Volume 18, Issue 5, 2025, Pages 1312-1334]
  • Sun, H. A Study on a Semi-empirical Model for the Local Loss Coefficient of Small Angle Contraction Pipes [Volume 18, Issue 6, 2025, Pages 1446-1458]
  • Sun, J. Experimental Study of the Flow Characteristics on Corrugated Wall with Perforation [Volume 18, Issue 1, 2025, Pages 98-111]
  • Sun, K. Experimental Study of the Flow Characteristics on Corrugated Wall with Perforation [Volume 18, Issue 1, 2025, Pages 98-111]
  • Sun, M. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Sun, X. Numerical Study on Aerodynamic Characteristics of H-Darrieus Wind Turbine with Blunt Trailing-edge Airfoil [Volume 18, Issue 4, 2025, Pages 976-991]
  • Surahmanto, F. Size Distribution and Mean Diameter of Microbubbles in Different Types of Ejector Bubble Generators [Volume 18, Issue 6, 2025, Pages 1459-1469]

T

  • Tabatabaei Malazi, M. Shape Optimization of Isosceles Triangle Facades for Improving the Aerodynamics of a Tall Building [Volume 18, Issue 5, 2025, Pages 1231-1245]
  • Tae, S. J. Back-turn Approach for Optimal Operation of Booster Pump Systems [Volume 18, Issue 9, 2025, Pages 2202-2211]
  • Taei, H. Numerical Simulation of Coupled CFD-flight Mechanics and Taguchi’s Approach for Reliability and Safety Assessments in the Hot Stage Separation of a Launch Vehicle [Volume 18, Issue 8, 2025, Pages 2085-2094]
  • Talebi, S. Examining the Impact of Using Hemispherical Dimples-protrusions on Heat Transfer and Pressure Drop in the Finned-tube Heat Exchanger with Different Configurations [Volume 18, Issue 7, 2025, Pages 1809-1822]
  • Tamanaei, A. Multi-objective Optimization of Staggered Tube Banks in Cross-flow Using Machine Learning and Genetic Algorithm [Volume 18, Issue 9, 2025, Pages 2163-2179]
  • Tang, C. Investigation of Wing Lift Enhancement by Combination of Plasma Jet Actuator and Synthetic Jet Actuator [Volume 18, Issue 5, 2025, Pages 1349-1363]
  • Tang, J. Numerical Study of the Passive Motion of Airfoils in Porous Media [Volume 18, Issue 8, 2025, Pages 2149-2162]
  • Tang, X. Research on the Three-dimensional Transient Characteristics of the Hydraulic System during Load Rejection with Combined Regulation of Ball Valve and Guide Vanes in the Entire Hydraulic Passage of the Pumped Storage Power Stations [Volume 18, Issue 9, 2025, Pages 2180-2201]
  • Tao, R. Optimized Reduction in Draft Tube Pressure Pulsation for a Francis Turbine [Volume 18, Issue 1, 2025, Pages 222-240]
  • Teng, C. Experimental Study on Separated-flow Transition on a High-lift Blade [Volume 18, Issue 4, 2025, Pages 1007-1022]
  • Tewari, R. P. CFD Analysis of Straightener Designs on Overall Performance of the Axial Flow Blood Pump [Volume 18, Issue 2, 2025, Pages 304-316]
  • Thanigaiarasu, S. Experimental Investigation on the Effect of Ring Tab on Mixing Enhancement of Subsonic Jets [Volume 18, Issue 7, 2025, Pages 1707-1719]
  • Tian, F. Experimental Study on Separated-flow Transition on a High-lift Blade [Volume 18, Issue 4, 2025, Pages 1007-1022]
  • Tian, Y. Optimization of Structural Parameters and Cavitation Suppression in Control Valves Based on P-WOA [Volume 18, Issue 8, 2025, Pages 2095-2107]
  • Tian, Z. X. Research on the Aerodynamic Characteristics of an Ultrahigh-speed Elevator During the Staggering Process Between the Car and Counterweight [Volume 18, Issue 5, 2025, Pages 1158-1173]
  • Ton, S. Size Distribution and Mean Diameter of Microbubbles in Different Types of Ejector Bubble Generators [Volume 18, Issue 6, 2025, Pages 1459-1469]
  • Tong, D. Numerical Investigation of the Impact of Intake Pipelines on the Performance and Flow Characteristics of a Centrifugal Compressor [Volume 18, Issue 6, 2025, Pages 1483-1501]
  • Torfeh, S. A Simulation of Bubbly Flow Regime in Boiling Process by Comparing the Numerical Models of VOF and RPI Boiling [Volume 18, Issue 5, 2025, Pages 1140-1157]
  • Tran, C. T. A Novel Pressure Drop Model for Seabed Airlift Devices Considering the Particle Sinking Effect [Volume 18, Issue 9, 2025, Pages 2252-2267]
  • Tu, Z. Effects of Different Attack Angles and Guide Vane Numbers on the Vortex-solid Interaction Noise of Axial Flow Fan [Volume 18, Issue 1, 2025, Pages 290-303]

V

  • Vasudeo, A. D. Effect of Gate Opening Height on the Hydraulic Jump Characteristics in an Open Channel [Volume 18, Issue 6, 2025, Pages 1502-1511]
  • Venkatesh, S. Studies on the Effect of Baffle Plates in Settling Chamber Performance by CFD and Experimental Analysis [Volume 18, Issue 3, 2025, Pages 567-584]
  • Venkateswara Rao, P. Computational Fluid Dynamics Studies on a Centrifugal Compressor Stage with Twisted Vanes of a Low Solidity Diffuser [Volume 18, Issue 9, 2025, Pages 2226-2238]
  • Venkateswarlu, K. Computational Fluid Dynamics Studies on a Centrifugal Compressor Stage with Twisted Vanes of a Low Solidity Diffuser [Volume 18, Issue 9, 2025, Pages 2226-2238]
  • Venkatramanan, S. Experimental Investigation on the Effect of Ring Tab on Mixing Enhancement of Subsonic Jets [Volume 18, Issue 7, 2025, Pages 1707-1719]
  • Verma, A. Experimental Investigations of Self-adjusting Bionic Flaps on Low-aspect Ratio Wings [Volume 18, Issue 4, 2025, Pages 992-1006]
  • Vinayagamurthy, G. Investigation of Sonic Under-expanded Jets Using Slotted Rectangular Mechanical Tabs [Volume 18, Issue 3, 2025, Pages 631-640]
  • Vinoth Raj, A. Propeller Slipstream Effects on the Aerodynamics Characteristics of a Transition Micro Air Vehicle [Volume 18, Issue 3, 2025, Pages 742-755]

W

  • Wang, D. Large Eddy Simulation of Swirl Topology Evolution in Strong Oxidant Jet Milling Force Field [Volume 18, Issue 2, 2025, Pages 374-388]
  • Wang, D. Effects of Solid Particles at Varying Concentrations on Hydrodynamic Cavitation Evolution in a Nozzle [Volume 18, Issue 2, 2025, Pages 485-503]
  • Wang, D. Effect of Receiver Holes on Flow and Heat Transfer Characteristics in A Radial Pre-swirl System: A LES Study [Volume 18, Issue 3, 2025, Pages 535-548]
  • Wang, G. Flow-induced Flutter Derivatives of Bridge Decks [Volume 18, Issue 4, 2025, Pages 835-849]
  • Wang, H. Enhanced Numerical Simulation Study of Accelerated Demulsification in Dilute Emulsions under Pulsed Electric Field Control [Volume 18, Issue 5, 2025, Pages 1217-1230]
  • Wang, J. Study on the Shock Wave Characteristics of Spherical and Cylindrical Explosives in Near-field Underwater Explosion [Volume 18, Issue 4, 2025, Pages 892-903]
  • Wang, K. Investigation of Compressor Surge Process and Flow Field Details Using Numerical Simulation [Volume 18, Issue 3, 2025, Pages 756-768]
  • Wang, L. Analysis of the Influence of Nozzle Structure and Hydraulic Parameters on the Cutting Efficiency of High-pressure Abrasive Water Jet (AWJ) [Volume 18, Issue 5, 2025, Pages 1246-1265]
  • Wang, Q. Numerical Study of Vertical Axis Wind Turbine with Spoiler Based on Orthogonal Experiments [Volume 18, Issue 1, 2025, Pages 159-170]
  • Wang, Q. Effect of Solidity and Camber Angle on Performance in Contra-rotating Open Rotor Design [Volume 18, Issue 1, 2025, Pages 191-204]
  • Wang, Q. Parameter Optimisation of a H-type Three-blade Contra-rotating Vertical-axis Wind Turbine at Low Tip-speed Ratio [Volume 18, Issue 6, 2025, Pages 1470-1482]
  • Wang, Q. Aeroelastic Analysis of a Wind Turbine with a Bamboo Honeycomb Structural Web [Volume 18, Issue 8, 2025, Pages 2122-2136]
  • Wang, Q. Flow Characteristics of Bulb Tubular Turbine Based on Solid-liquid Two-phase Flow Model [Volume 18, Issue 8, 2025, Pages 2137-2148]
  • Wang, S. F. Effect of Coolant Inlet Mode on Heat Transfer Characteristics of a Twin-web Turbine Disc Cavity [Volume 18, Issue 4, 2025, Pages 933-946]
  • Wang, T. Numerical Study on the Drag Reduction for a D-Shaped Bluff Body with Wavy Trailing Edge Structures [Volume 18, Issue 3, 2025, Pages 661-677]
  • Wang, W. Effect of Receiver Holes on Flow and Heat Transfer Characteristics in A Radial Pre-swirl System: A LES Study [Volume 18, Issue 3, 2025, Pages 535-548]
  • Wang, W. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]
  • Wang, W. Design and Flow Field Analysis of Extendable Leaching-optimized Cavern Construction Device for Salt Cavern Gas Storage [Volume 18, Issue 9, 2025, Pages 2349-2360]
  • Wang, X. A Study on a Semi-empirical Model for the Local Loss Coefficient of Small Angle Contraction Pipes [Volume 18, Issue 6, 2025, Pages 1446-1458]
  • Wang, X. Numerical Analysis of Hydrokinetic Energy Harvesting from Flow-induced Vibration of a Cylinder with a Single Protrusion [Volume 18, Issue 7, 2025, Pages 1796-1808]
  • Wang, X. F. Contribution of Suspension Bogies’ Aerodynamic Loads to the Dynamic Characteristics of a High-temperature Superconducting Maglev Train Running under Crosswind [Volume 18, Issue 6, 2025, Pages 1617-1638]
  • Wang, X. W. A Novel Pressure Drop Model for Seabed Airlift Devices Considering the Particle Sinking Effect [Volume 18, Issue 9, 2025, Pages 2252-2267]
  • Wang, Y. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Wang, Y. Numerical Study of the Passive Motion of Airfoils in Porous Media [Volume 18, Issue 8, 2025, Pages 2149-2162]
  • Wang, Y. Effect of Baffle Structure for the Particle Deposition Characteristics of in the Novel Cavity Upstream of the Pre-swirl Nozzles [Volume 18, Issue 9, 2025, Pages 2309-2320]
  • Wang, Y. Extraction for the Evolution Features of Cavitation Cloud Induced by the Self-excited Oscillating Jet [Volume 18, Issue 9, 2025, Pages 2377-2388]
  • Wang, Z. Effect of Solidity and Camber Angle on Performance in Contra-rotating Open Rotor Design [Volume 18, Issue 1, 2025, Pages 191-204]
  • Wang, Z. Effects of Inlet Tip Clearance on Internal Flow Characteristic and Aerodynamic Performance of Centrifugal Compressor [Volume 18, Issue 1, 2025, Pages 274-289]
  • Wang, Z. Numerical Study of the Aerodynamic Effect of Ski Suit Surface Roughness on Ski Jumping Athletes During the Flight Phase [Volume 18, Issue 3, 2025, Pages 710-727]
  • Wang, Z. Effect of Motor Blockage on Transient Characteristics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 4, 2025, Pages 1064-1085]
  • Wang, Z. Effect of Motor Blockage on Transient Characteristics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 4, 2025, Pages 1064-1085]
  • Wang, Z. Experiment and Numerical Simulation of Aerodynamic Performance of Compressor with Damaged Blades [Volume 18, Issue 5, 2025, Pages 1312-1334]
  • Wang, Z. Passive Drag Reduction Optimization for Complex Commercial Vehicle Models [Volume 18, Issue 6, 2025, Pages 1639-1651]
  • Wang, Z. N. A Novel Pressure Drop Model for Seabed Airlift Devices Considering the Particle Sinking Effect [Volume 18, Issue 9, 2025, Pages 2252-2267]
  • Wei, J. Numerical Investigation of the Aerodynamic and Aeroacoustic Characteristics of a Double-suction Centrifugal Fan under Different Operating Conditions [Volume 18, Issue 6, 2025, Pages 1412-1429]
  • Wei, L. J. Investigation of the Flow Field Characteristics of Aortic Bileaflet Mechanical Heart Valves with Different Leaflet Shapes Using PIV [Volume 18, Issue 4, 2025, Pages 1048-1063]
  • Wei, P. Simulation of the Separation of Homogeneous Whole Blood in a Spin-up Rotating Cylindrical Container [Volume 18, Issue 1, 2025, Pages 73-86]
  • Wei, Y. Effect of the Circumferential Position of Balance Holes on the Cavitation Performance and Cavitation Erosion of Centrifugal Pump [Volume 18, Issue 1, 2025, Pages 131-144]
  • Wei, Y. Effects of Inlet Tip Clearance on Internal Flow Characteristic and Aerodynamic Performance of Centrifugal Compressor [Volume 18, Issue 1, 2025, Pages 274-289]
  • Wei, Y. Effect of an Axially Offset Impeller on the Transient Physics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 7, 2025, Pages 1873-1892]
  • Weining, L. Effect of Pressure Equalization Groove Structure on Static Characteristics of Aerostatic Bearings [Volume 18, Issue 4, 2025, Pages 1086-1097]
  • Wu, D. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]
  • Wu, S. Numerical Study of a Supersonic Nozzle Gas Jet Laden with a Dry Powder Fire-extinguishing Agent Injected from a Bypass Injector [Volume 18, Issue 4, 2025, Pages 1098-1114]
  • Wu, X. 3-D Numerical Study of Cavitation Evolution Through A Butterfly Valve Model at Different Regulating Conditions [Volume 18, Issue 2, 2025, Pages 332-347]
  • Wu, X. Effect of Motor Blockage on Transient Characteristics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 4, 2025, Pages 1064-1085]
  • Wu, Y. Study on the LES of Premixed Gas Flame Dynamics in a Weak Confinement Structure: The Influence of Continuous Obstacle Plates [Volume 18, Issue 4, 2025, Pages 864-879]
  • Wu, Y. Enhanced Numerical Simulation Study of Accelerated Demulsification in Dilute Emulsions under Pulsed Electric Field Control [Volume 18, Issue 5, 2025, Pages 1217-1230]
  • Wu, Z. Research on the Effects of Vane Geometry Parameters on Cyclone Pump Performance [Volume 18, Issue 8, 2025, Pages 2053-2065]
  • Wu, Z. Y. 3-D Numerical Study of Cavitation Evolution Through A Butterfly Valve Model at Different Regulating Conditions [Volume 18, Issue 2, 2025, Pages 332-347]

X

  • Xiang, C. Numerical Analysis of the Inlet and Outlet Diameter Effects on Pulsation Dynamics and Cavitation in the Lobe Pump [Volume 18, Issue 5, 2025, Pages 1189-1204]
  • Xiao, L. L. Simulation of the Separation of Homogeneous Whole Blood in a Spin-up Rotating Cylindrical Container [Volume 18, Issue 1, 2025, Pages 73-86]
  • Xiao, S. Assessment of Erosion Wear on a Reducing Pipe in a Propulsion System Using the Eulerian-Lagrangian Method [Volume 18, Issue 9, 2025, Pages 2282-2296]
  • Xie, C. Numerical Investigation of Clocking Effect on Fluctuating Characters and Radial Force within Impeller for a Centrifugal Pump [Volume 18, Issue 3, 2025, Pages 549-566]
  • Xie, R. Numerical Research of the Water Entry of Hyperelastic Spheres Within Low Froude Numbers [Volume 18, Issue 3, 2025, Pages 821-834]
  • Xing, Y. Dynamic Characteristics of Near-wall Single Bubble Collapse-induced Shock Waves [Volume 18, Issue 3, 2025, Pages 617-630]
  • Xu, B. Experimental Study on Separated-flow Transition on a High-lift Blade [Volume 18, Issue 4, 2025, Pages 1007-1022]
  • Xu, C. Research on Axisymmetric Vectoring Exhaust Nozzle Dynamic Characteristics Considering Aerodynamic and Thermal Loads Effect [Volume 18, Issue 6, 2025, Pages 1381-1395]
  • Xu, J. Investigation of the Influence of Different Flapping Wing Motion Characteristics on Aerodynamic Parameters under Incoming Flow [Volume 18, Issue 6, 2025, Pages 1596-1616]
  • Xu, L. Research on the Aerodynamic Characteristics of an Ultrahigh-speed Elevator During the Staggering Process Between the Car and Counterweight [Volume 18, Issue 5, 2025, Pages 1158-1173]
  • Xu, L. C. Unsteady Flow Mechanisms of the Stability Improvement for an Optimized Compressor [Volume 18, Issue 4, 2025, Pages 919-932]
  • Xu, P. Effect of the Circumferential Position of Balance Holes on the Cavitation Performance and Cavitation Erosion of Centrifugal Pump [Volume 18, Issue 1, 2025, Pages 131-144]
  • Xu, Y. Effect of Receiver Holes on Flow and Heat Transfer Characteristics in A Radial Pre-swirl System: A LES Study [Volume 18, Issue 3, 2025, Pages 535-548]
  • Xue, M. Passive Drag Reduction Optimization for Complex Commercial Vehicle Models [Volume 18, Issue 6, 2025, Pages 1639-1651]
  • Xun, D. Effect of the Circumferential Position of Balance Holes on the Cavitation Performance and Cavitation Erosion of Centrifugal Pump [Volume 18, Issue 1, 2025, Pages 131-144]
  • Xuze, W. Investigation of Geometric Characteristics on the Lubricant Performance of Thrust Bearing with Cavitation [Volume 18, Issue 7, 2025, Pages 1833-1842]

Y

  • Yan, J. Experimental Investigation of Fuel Film Characteristics after Spray Impacting on Ultra-cold Surface [Volume 18, Issue 6, 2025, Pages 1550-1562]
  • Yan, X. Characteristics of an Internal Dielectric Barrier Discharge Plasma-induced Blowing Device [Volume 18, Issue 4, 2025, Pages 1023-1034]
  • Yang, C. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Yang, D. Characteristics of an Internal Dielectric Barrier Discharge Plasma-induced Blowing Device [Volume 18, Issue 4, 2025, Pages 1023-1034]
  • Yang, F. Numerical Simulation and Experimental Study on the Gas-liquid Two-phase Flow in the Pump During the Gas Cut-off Transition Process [Volume 18, Issue 8, 2025, Pages 1980-1992]
  • Yang, H. Effects of Inlet Tip Clearance on Internal Flow Characteristic and Aerodynamic Performance of Centrifugal Compressor [Volume 18, Issue 1, 2025, Pages 274-289]
  • Yang, H. Numerical Study on the Drag Reduction for a D-Shaped Bluff Body with Wavy Trailing Edge Structures [Volume 18, Issue 3, 2025, Pages 661-677]
  • Yang, H. Passive Drag Reduction Optimization for Complex Commercial Vehicle Models [Volume 18, Issue 6, 2025, Pages 1639-1651]
  • Yang, H. Effect of an Axially Offset Impeller on the Transient Physics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 7, 2025, Pages 1873-1892]
  • Yang, J. Study and Evaluation of the Effects of Bionic Groove Structures Applied to Wheel Spokes on the Aerodynamics of a Car Model [Volume 18, Issue 6, 2025, Pages 1652-1668]
  • Yang, J. W. Numerical Investigation of the Aerodynamic and Aeroacoustic Characteristics of a Double-suction Centrifugal Fan under Different Operating Conditions [Volume 18, Issue 6, 2025, Pages 1412-1429]
  • Yang, L. Optimization of Structural Parameters and Cavitation Suppression in Control Valves Based on P-WOA [Volume 18, Issue 8, 2025, Pages 2095-2107]
  • Yang, S. Experimental Study on Separated-flow Transition on a High-lift Blade [Volume 18, Issue 4, 2025, Pages 1007-1022]
  • Yang, S. H. High-efficiency Axial Flow Fan Design by Combining Through-flow Modeling, Optimization Algorithm and Computational Fluid Dynamics Simulation [Volume 18, Issue 8, 2025, Pages 1953-1963]
  • Yang, W. Effect of Motor Blockage on Transient Characteristics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 4, 2025, Pages 1064-1085]
  • Yang, W. Research on the Non-uniform Flow Characteristics in a Screw Mixed-flow Deep-sea Mining Pump [Volume 18, Issue 7, 2025, Pages 1861-1872]
  • Yang, X. Investigation of Compressor Surge Process and Flow Field Details Using Numerical Simulation [Volume 18, Issue 3, 2025, Pages 756-768]
  • Yang, Z. Effect of Motor Blockage on Transient Characteristics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 4, 2025, Pages 1064-1085]
  • Yao, S. Research on Axisymmetric Vectoring Exhaust Nozzle Dynamic Characteristics Considering Aerodynamic and Thermal Loads Effect [Volume 18, Issue 6, 2025, Pages 1381-1395]
  • Yaping, X. Effect of Pressure Equalization Groove Structure on Static Characteristics of Aerostatic Bearings [Volume 18, Issue 4, 2025, Pages 1086-1097]
  • Yesilata, B. Experimental and Numerical Study of Flow over Rectangular Cavity [Volume 18, Issue 9, 2025, Pages 2297-2308]
  • Yildiz, E. Optimal Design and Analysis of the Cooled Turbine Blade in Gas Turbines with CFD [Volume 18, Issue 1, 2025, Pages 60-72]
  • Yin, C. Spatiotemporal Cooperative Effect Between the Time-asymmetric Ratio of Oscillating Trailing Edge Flap and Pivot Location on the Aerodynamics of a Pitching Airfoil [Volume 18, Issue 7, 2025, Pages 1782-1795]
  • You, F. Study on Staged Start-up Mitigation Strategies for Water Hammer in Large-scale Centrifugal Pump Systems Based on One-dimensional and Three-dimensional Coupled Simulation [Volume 18, Issue 7, 2025, Pages 1906-1922]
  • Yu, C. Investigation of Geometric Characteristics on the Lubricant Performance of Thrust Bearing with Cavitation [Volume 18, Issue 7, 2025, Pages 1833-1842]
  • Yu, J. Study on the Shock Wave Characteristics of Spherical and Cylindrical Explosives in Near-field Underwater Explosion [Volume 18, Issue 4, 2025, Pages 892-903]
  • Yu, J. A Study on a Semi-empirical Model for the Local Loss Coefficient of Small Angle Contraction Pipes [Volume 18, Issue 6, 2025, Pages 1446-1458]
  • Yu, L. Experimental Study of the Flow Characteristics on Corrugated Wall with Perforation [Volume 18, Issue 1, 2025, Pages 98-111]
  • Yu, Y. Large Eddy Simulation of Swirl Topology Evolution in Strong Oxidant Jet Milling Force Field [Volume 18, Issue 2, 2025, Pages 374-388]
  • Yu, Y. Assessment of Erosion Wear on a Reducing Pipe in a Propulsion System Using the Eulerian-Lagrangian Method [Volume 18, Issue 9, 2025, Pages 2282-2296]
  • Yu, Z. Y. Study on the Characteristics and Formation Mechanism of Pressure Fluctuation in an Axial Flow Pump Based on Dynamic Mode Decomposition [Volume 18, Issue 5, 2025, Pages 1335-1348]
  • Yuan, J. Numerical Investigation on the Cavitating Flow and the Cavitation-induced Noise in the Pump-jet Propeller [Volume 18, Issue 2, 2025, Pages 419-437]
  • Yuan, P. Experimental Study of the Flow Characteristics on Corrugated Wall with Perforation [Volume 18, Issue 1, 2025, Pages 98-111]
  • Yuan, Y. Experimental Investigation of Fuel Film Characteristics after Spray Impacting on Ultra-cold Surface [Volume 18, Issue 6, 2025, Pages 1550-1562]
  • Yuanqi, C. Effect of Pressure Equalization Groove Structure on Static Characteristics of Aerostatic Bearings [Volume 18, Issue 4, 2025, Pages 1086-1097]
  • Yue, L. Passive Drag Reduction Optimization for Complex Commercial Vehicle Models [Volume 18, Issue 6, 2025, Pages 1639-1651]
  • Yue, Y. Rapid Prediction of Ice Accretion on Swept Wings Based on Proper Orthogonal Decomposition and Surrogate Modelling [Volume 18, Issue 8, 2025, Pages 2026-2042]

Z

  • Zahran, A. A. Study of Effect of Convergence Section Geometric on the Performance of a Sonic Nozzle [Volume 18, Issue 7, 2025, Pages 1669-1682]
  • Zarinvafa, A. Aerodynamic Performance of Different Trailing-edge Serrations for High Reynolds Number Flows around Wing-flap System [Volume 18, Issue 4, 2025, Pages 1035-1047]
  • Zha, C. Design and Flow Field Analysis of Extendable Leaching-optimized Cavern Construction Device for Salt Cavern Gas Storage [Volume 18, Issue 9, 2025, Pages 2349-2360]
  • Zhang, G. 3-D Numerical Study of Cavitation Evolution Through A Butterfly Valve Model at Different Regulating Conditions [Volume 18, Issue 2, 2025, Pages 332-347]
  • Zhang, H. Numerical Investigation of Clocking Effect on Fluctuating Characters and Radial Force within Impeller for a Centrifugal Pump [Volume 18, Issue 3, 2025, Pages 549-566]
  • Zhang, H. Investigation of Compressor Surge Process and Flow Field Details Using Numerical Simulation [Volume 18, Issue 3, 2025, Pages 756-768]
  • Zhang, H. Research on the Aerodynamic Characteristics of an Ultrahigh-speed Elevator During the Staggering Process Between the Car and Counterweight [Volume 18, Issue 5, 2025, Pages 1158-1173]
  • Zhang, H. Research on Axisymmetric Vectoring Exhaust Nozzle Dynamic Characteristics Considering Aerodynamic and Thermal Loads Effect [Volume 18, Issue 6, 2025, Pages 1381-1395]
  • Zhang, H. Numerical Investigation of the Aerodynamic and Aeroacoustic Characteristics of a Double-suction Centrifugal Fan under Different Operating Conditions [Volume 18, Issue 6, 2025, Pages 1412-1429]
  • Zhang, H. Influence of Clearances in Variable Guide Vanes and Stators on the Performance of a Multi-stage Compressor and Its Flow Control [Volume 18, Issue 6, 2025, Pages 1524-1533]
  • Zhang, H. T. 3-D Numerical Study of Cavitation Evolution Through A Butterfly Valve Model at Different Regulating Conditions [Volume 18, Issue 2, 2025, Pages 332-347]
  • Zhang, J. Numerical Study of the Effect of Rail Modelling Method on Train Aerodynamic Performance and Slipstream [Volume 18, Issue 1, 2025, Pages 260-273]
  • Zhang, J. Numerical Study on Static Airtightness of Subway Vehicles with Multiple Leak Holes [Volume 18, Issue 2, 2025, Pages 348-362]
  • Zhang, J. Numerical Modal Analysis of the Correlation Between Spanwise Vortex Shedding and Far-field Aeolian Noise for Square and Circular Wall-mounted Cylinders [Volume 18, Issue 2, 2025, Pages 450-467]
  • Zhang, J. Research on the Aerodynamic Characteristics of an Ultrahigh-speed Elevator During the Staggering Process Between the Car and Counterweight [Volume 18, Issue 5, 2025, Pages 1158-1173]
  • Zhang, J. Numerical Investigation of the Impact of Intake Pipelines on the Performance and Flow Characteristics of a Centrifugal Compressor [Volume 18, Issue 6, 2025, Pages 1483-1501]
  • Zhang, J. Research on the Effect of Small Blade Arrangement on the Cavitation Performance of Centrifugal Pumps [Volume 18, Issue 6, 2025, Pages 1563-1575]
  • Zhang, J. Numerical Simulation and Experimental Study on the Gas-liquid Two-phase Flow in the Pump During the Gas Cut-off Transition Process [Volume 18, Issue 8, 2025, Pages 1980-1992]
  • Zhang, K. X. Simulation of the Separation of Homogeneous Whole Blood in a Spin-up Rotating Cylindrical Container [Volume 18, Issue 1, 2025, Pages 73-86]
  • Zhang, L. Numerical Research of the Water Entry of Hyperelastic Spheres Within Low Froude Numbers [Volume 18, Issue 3, 2025, Pages 821-834]
  • Zhang, L. Numerical Study of a Supersonic Nozzle Gas Jet Laden with a Dry Powder Fire-extinguishing Agent Injected from a Bypass Injector [Volume 18, Issue 4, 2025, Pages 1098-1114]
  • Zhang, M. Z. Investigation of the Flow Field Characteristics of Aortic Bileaflet Mechanical Heart Valves with Different Leaflet Shapes Using PIV [Volume 18, Issue 4, 2025, Pages 1048-1063]
  • Zhang, P. Numerical Investigation on the Cavitating Flow and the Cavitation-induced Noise in the Pump-jet Propeller [Volume 18, Issue 2, 2025, Pages 419-437]
  • Zhang, R. Extraction for the Evolution Features of Cavitation Cloud Induced by the Self-excited Oscillating Jet [Volume 18, Issue 9, 2025, Pages 2377-2388]
  • Zhang, S. Research on the Influence of Jet Control Point Distribution on Gas‒liquid Separation Characteristics in a Helical Axial-flow Multiphase Pump [Volume 18, Issue 5, 2025, Pages 1285-1300]
  • Zhang, S. G. Numerical Investigation of the Aerodynamic and Aeroacoustic Characteristics of a Double-suction Centrifugal Fan under Different Operating Conditions [Volume 18, Issue 6, 2025, Pages 1412-1429]
  • Zhang, W. Effect of the Circumferential Position of Balance Holes on the Cavitation Performance and Cavitation Erosion of Centrifugal Pump [Volume 18, Issue 1, 2025, Pages 131-144]
  • Zhang, W. Effect of Motor Blockage on Transient Characteristics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 4, 2025, Pages 1064-1085]
  • Zhang, W. Experimental Investigation of Fuel Film Characteristics after Spray Impacting on Ultra-cold Surface [Volume 18, Issue 6, 2025, Pages 1550-1562]
  • Zhang, W. Study and Evaluation of the Effects of Bionic Groove Structures Applied to Wheel Spokes on the Aerodynamics of a Car Model [Volume 18, Issue 6, 2025, Pages 1652-1668]
  • Zhang, W. Effect of an Axially Offset Impeller on the Transient Physics of Asymmetric Flow in a Double-suction Centrifugal Fan [Volume 18, Issue 7, 2025, Pages 1873-1892]
  • Zhang, W. Effect of Baffle Structure for the Particle Deposition Characteristics of in the Novel Cavity Upstream of the Pre-swirl Nozzles [Volume 18, Issue 9, 2025, Pages 2309-2320]
  • Zhang, X. Enhanced Numerical Simulation Study of Accelerated Demulsification in Dilute Emulsions under Pulsed Electric Field Control [Volume 18, Issue 5, 2025, Pages 1217-1230]
  • Zhang, X. P. Study on the Shock Wave Characteristics of Spherical and Cylindrical Explosives in Near-field Underwater Explosion [Volume 18, Issue 4, 2025, Pages 892-903]
  • Zhang, Y. Effects of Inlet Tip Clearance on Internal Flow Characteristic and Aerodynamic Performance of Centrifugal Compressor [Volume 18, Issue 1, 2025, Pages 274-289]
  • Zhang, Y. Characteristics of an Internal Dielectric Barrier Discharge Plasma-induced Blowing Device [Volume 18, Issue 4, 2025, Pages 1023-1034]
  • Zhang, Y. Design and Application of a Test Rig for Stationary Component Performance Measurement of Centrifugal Compressors [Volume 18, Issue 4, 2025, Pages 1115-1129]
  • Zhang, Y. Numerical Investigation of the Impact of Intake Pipelines on the Performance and Flow Characteristics of a Centrifugal Compressor [Volume 18, Issue 6, 2025, Pages 1483-1501]
  • Zhang, Y. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Zhang, Y. Numerical Study of the Passive Motion of Airfoils in Porous Media [Volume 18, Issue 8, 2025, Pages 2149-2162]
  • Zhang, Y. F. Numerical Investigation of the Aerodynamic and Aeroacoustic Characteristics of a Double-suction Centrifugal Fan under Different Operating Conditions [Volume 18, Issue 6, 2025, Pages 1412-1429]
  • Zhang, Y. F. Numerical Analysis of Fluid‒solid Interactions in a 3D Piezoelectric Micropump Featuring a Passive Check Valve [Volume 18, Issue 7, 2025, Pages 1923-1937]
  • Zhang, Z. Multi-objective Optimization of Combined Internal Components with a Vortex Stabilizer and Apex Cone for Performance Improvement of Cyclone Separator [Volume 18, Issue 8, 2025, Pages 2066-2084]
  • Zhao, J. A Study on a Semi-empirical Model for the Local Loss Coefficient of Small Angle Contraction Pipes [Volume 18, Issue 6, 2025, Pages 1446-1458]
  • Zhao, J. Design and Flow Field Analysis of Extendable Leaching-optimized Cavern Construction Device for Salt Cavern Gas Storage [Volume 18, Issue 9, 2025, Pages 2349-2360]
  • Zhao, K. Design and Application of a Test Rig for Stationary Component Performance Measurement of Centrifugal Compressors [Volume 18, Issue 4, 2025, Pages 1115-1129]
  • Zhao, M. Unsteady Flow Mechanisms of the Stability Improvement for an Optimized Compressor [Volume 18, Issue 4, 2025, Pages 919-932]
  • Zhao, W. Analysis of Sealing Performance and Mechanism of Biomimetic Superoleophobic Surface Structure [Volume 18, Issue 7, 2025, Pages 1938-1952]
  • Zhao, W. G. Effects of Solid Particles at Varying Concentrations on Hydrodynamic Cavitation Evolution in a Nozzle [Volume 18, Issue 2, 2025, Pages 485-503]
  • Zhao, W. G. Research on the Effect of Small Blade Arrangement on the Cavitation Performance of Centrifugal Pumps [Volume 18, Issue 6, 2025, Pages 1563-1575]
  • Zhao, Y. Numerical Analysis of Hydrokinetic Energy Harvesting from Flow-induced Vibration of a Cylinder with a Single Protrusion [Volume 18, Issue 7, 2025, Pages 1796-1808]
  • Zhao, Y. J. Unsteady Flow Mechanisms of the Stability Improvement for an Optimized Compressor [Volume 18, Issue 4, 2025, Pages 919-932]
  • Zhao, Y. J. Multi-objective Optimization of Combined Internal Components with a Vortex Stabilizer and Apex Cone for Performance Improvement of Cyclone Separator [Volume 18, Issue 8, 2025, Pages 2066-2084]
  • Zhao, Z. Numerical Study of Vertical Axis Wind Turbine with Spoiler Based on Orthogonal Experiments [Volume 18, Issue 1, 2025, Pages 159-170]
  • Zhao, Z. Parameter Optimisation of a H-type Three-blade Contra-rotating Vertical-axis Wind Turbine at Low Tip-speed Ratio [Volume 18, Issue 6, 2025, Pages 1470-1482]
  • Zhao, Z. Aeroelastic Analysis of a Wind Turbine with a Bamboo Honeycomb Structural Web [Volume 18, Issue 8, 2025, Pages 2122-2136]
  • Zheng, S. Behavior of a Glycerol Aqueous Droplet Impacting a Thin Water Film [Volume 18, Issue 3, 2025, Pages 798-808]
  • Zheng, S. Investigation of the Influence of Different Flapping Wing Motion Characteristics on Aerodynamic Parameters under Incoming Flow [Volume 18, Issue 6, 2025, Pages 1596-1616]
  • Zhou, B. Numerical Analysis of Fluid‒solid Interactions in a 3D Piezoelectric Micropump Featuring a Passive Check Valve [Volume 18, Issue 7, 2025, Pages 1923-1937]
  • Zhou, F. Flow Characteristics of Bulb Tubular Turbine Based on Solid-liquid Two-phase Flow Model [Volume 18, Issue 8, 2025, Pages 2137-2148]
  • Zhou, H. Numerical Analysis of the Inlet and Outlet Diameter Effects on Pulsation Dynamics and Cavitation in the Lobe Pump [Volume 18, Issue 5, 2025, Pages 1189-1204]
  • Zhou, H. C. Study and Evaluation of the Effects of Bionic Groove Structures Applied to Wheel Spokes on the Aerodynamics of a Car Model [Volume 18, Issue 6, 2025, Pages 1652-1668]
  • Zhou, H. H. Study on the Characteristics and Formation Mechanism of Pressure Fluctuation in an Axial Flow Pump Based on Dynamic Mode Decomposition [Volume 18, Issue 5, 2025, Pages 1335-1348]
  • Zhou, J. Effects of Different Attack Angles and Guide Vane Numbers on the Vortex-solid Interaction Noise of Axial Flow Fan [Volume 18, Issue 1, 2025, Pages 290-303]
  • Zhou, L. Effect of Solidity and Camber Angle on Performance in Contra-rotating Open Rotor Design [Volume 18, Issue 1, 2025, Pages 191-204]
  • Zhou, L. Assessing Energy Loss and Entropy Production in a Centrifugal Pump with Various Impeller Blade Trailing Edges [Volume 18, Issue 2, 2025, Pages 518-534]
  • Zhou, N. Experimental Study on the Effect of the Spray Time on the Deflagration Characteristics of Oil Mist in a Closed Chamber [Volume 18, Issue 7, 2025, Pages 1823-1832]
  • Zhou, P. Numerical Analysis of the Inlet and Outlet Diameter Effects on Pulsation Dynamics and Cavitation in the Lobe Pump [Volume 18, Issue 5, 2025, Pages 1189-1204]
  • Zhou, T. Unsteady Flow Mechanisms of the Stability Improvement for an Optimized Compressor [Volume 18, Issue 4, 2025, Pages 919-932]
  • Zhou, W. Effect of the Circumferential Position of Balance Holes on the Cavitation Performance and Cavitation Erosion of Centrifugal Pump [Volume 18, Issue 1, 2025, Pages 131-144]
  • Zhou, Z. Numerical Study of the Passive Motion of Airfoils in Porous Media [Volume 18, Issue 8, 2025, Pages 2149-2162]
  • Zhu, H. Effect of the Circumferential Position of Balance Holes on the Cavitation Performance and Cavitation Erosion of Centrifugal Pump [Volume 18, Issue 1, 2025, Pages 131-144]
  • Zhu, J. Behavior of a Glycerol Aqueous Droplet Impacting a Thin Water Film [Volume 18, Issue 3, 2025, Pages 798-808]
  • Zhu, L. Spatiotemporal Cooperative Effect Between the Time-asymmetric Ratio of Oscillating Trailing Edge Flap and Pivot Location on the Aerodynamics of a Pitching Airfoil [Volume 18, Issue 7, 2025, Pages 1782-1795]
  • Zhu, R. Comprehensive Research on the Effects of Different Launch Conditions on Pump-jet Propulsor Performance [Volume 18, Issue 4, 2025, Pages 960-975]
  • Zhu, X. Numerical Investigation of Clocking Effect on Fluctuating Characters and Radial Force within Impeller for a Centrifugal Pump [Volume 18, Issue 3, 2025, Pages 549-566]
  • Zhu, X. Analysis of the Influence of Nozzle Structure and Hydraulic Parameters on the Cutting Efficiency of High-pressure Abrasive Water Jet (AWJ) [Volume 18, Issue 5, 2025, Pages 1246-1265]
  • Zhu, X. A Study on a Semi-empirical Model for the Local Loss Coefficient of Small Angle Contraction Pipes [Volume 18, Issue 6, 2025, Pages 1446-1458]
  • Zhuang, Z. Y. Study on the Characteristics and Formation Mechanism of Pressure Fluctuation in an Axial Flow Pump Based on Dynamic Mode Decomposition [Volume 18, Issue 5, 2025, Pages 1335-1348]